Carbine Fundamentals Safety Manipulation
Added 2021-01-15 05:35:28 +0000 UTCHello Tier II and Tier III,
In this video I cover safety manipulation. This is a quick concept but needs to be hammered home. It is extremely important that proper safety manipulation becomes instinctual. Let me know if you have any questions in the comments below.
Just finished a long day of editing on new content for YouTube and will be releasing some of it here first. Pretty excited to publish.
Thank you for supporting Vigilance Elite.
Always handle weapons safely. Weapon on safe, finger off the trigger until you're ready to shoot, visually and physically verify that firearms are clear and safe.
SAFETY
REMEMBER: YOU ARE ALWAYS RESPONSIBLE FOR EVERY ROUND THAT LEAVES YOUR BARREL.
When handling a gun, follow these three fundamental rules:
- ALWAYS keep the gun pointed in a safe direction.
This is the primary rule of gun safety. A safe direction means that the gun is pointed so that even if it were to go off it would not cause injury or damage. The key to this rule is to control where the muzzle or front end of the barrel is pointed at all times. Common sense dictates the safest direction, depending on different circumstances. - ALWAYS keep your finger off the trigger until ready to shoot.
When holding a gun, rest your finger on the trigger guard or along the side of the gun. Until you are actually ready to fire, do not touch the trigger. - ALWAYS keep the gun unloaded until ready to use.
Whenever you pick up a gun, immediately engage the safety device if possible, and, if the gun has a magazine, remove it before opening the action and looking into the chamber(s) which should be clear of ammunition. If you do not know how to open the action or inspect the chamber(s), leave the gun alone and get help from someone who does.
When using or storing a gun, always follow these nine important rules:
- Know your target and what is beyond.
Be absolutely sure you have identified your target beyond any doubt. Equally important, be aware of the area beyond your target. This means observing your prospective area of fire before you shoot. Never fire in a direction in which there are people or any other potential for mishap. Think first. Shoot second. - Know how to use the gun safely.
Before handling a gun, learn how it operates. Know its basic parts, how to safely open and close the action and remove any ammunition from the gun or magazine. Remember, a gun's mechanical safety device is never foolproof. Nothing can ever replace safe gun handling. - Be sure the gun is safe to operate.
Just like other tools, guns need regular maintenance to remain operable. Regular cleaning and proper storage are a part of the gun's general upkeep. If there is any question concerning a gun's ability to function, a knowledgeable gunsmith should look at it. - Use only the correct ammunition for your gun.
Only BBs, pellets, cartridges or shells designed for a particular gun can be fired safely in that gun. Most guns have the ammunition type stamped on the barrel. Ammunition can be identified by information printed on the box and sometimes stamped on the cartridge. Do not shoot the gun unless you know you have the proper ammunition. - Wear eye and ear protection as appropriate.
Guns are loud and the noise can cause hearing damage. They can also emit debris and hot gas that could cause eye injury. For these reasons, shooting glasses and hearing protectors should be worn by shooters and spectators. - Never use alcohol or over-the-counter, prescription or other drugs before or while shooting.
Alcohol, as well as any other substance likely to impair normal mental or physical bodily functions, must not be used before or while handling or shooting guns. - Store guns so they are not accessible to unauthorized persons.
Many factors must be considered when deciding where and how to store guns. A person's particular situation will be a major part of the consideration. Dozens of gun storage devices, as well as locking devices that attach directly to the gun, are available. However, mechanical locking devices, like the mechanical safeties built into guns, can fail and should not be used as a substitute for safe gun handling and the observance of all gun safety rules. - Be aware that certain types of guns and many shooting activities require additional safety precautions.
Adhere to all firearms safety rules and range commands/protocols at your facility. For more info on safety, see https://www.nrablog.com/articles/2015/7/the-rules-of-nra-gun-safety/
Comments
steel shoots back sometimes?
Greg Parks
2022-10-09 15:16:27 +0000 UTCHey Shawn, could you maybe do a quick video to talk about safety considerations for training and shooting steel at close distances like this with both rifles and pistols…in a motherfucking nutshell?
Brad Sconzert
2021-10-04 05:39:04 +0000 UTCI would probably use the ambi. If it isn't as positive, I'd pay more for a more positive selector. I use a Radian in most of mine.
Shawn
2021-02-18 05:10:40 +0000 UTCWhat about going on safe with the index finger for southpaws. I have an ambi safety installed, so I don't need to use my index, but it just feels way more natural and firm especially when going back to 10 gun. I know the main concern would be that in a dynamic situation that finger could be forced back into the trigger when going for the safety...any thoughts please?
Casey Sumner
2021-02-17 17:07:45 +0000 UTCThanks! New one coming soon.
Shawn
2021-01-23 04:20:25 +0000 UTCGreat video!
Benjamin P Hemulgada jr
2021-01-20 22:17:03 +0000 UTCAbsolutely. With the newer ambi controls, the ARs are becoming more southpaw friendly these days.
Shawn
2021-01-20 04:10:25 +0000 UTCThis is an area where the AR and similar weapons are easier to work with than the AK, doubly so for southpaws.
Stefan Andersson
2021-01-17 21:28:50 +0000 UTCThis 👉 is my saftey sir. Sorry, I had too. Great video as always Shawn!
Randy smith
2021-01-16 12:22:46 +0000 UTCNice! Debrief 008 coming soon!
Shawn
2021-01-16 02:27:00 +0000 UTCThanks Jeff!
Shawn
2021-01-16 02:24:42 +0000 UTCAt the 10 gun position (high port) safety should be on. Check out the punch out drill on here, I go in depth there. That one is helpful for developing the muscle memory.
Shawn
2021-01-16 02:24:33 +0000 UTCThanks shipmate! This comes just in time for me. Made the move to FL, and will pick up my new (and first) rifle on Wednesday. I set up a 1:1 lesson with the RSO this Monday while I wait for the mandated waiting period, and ya bet yer ass I'll be putting some of your lessons to practice - maybe even the cheek weld foamy suggestion. BZ!...and BTW, when is the 008 debrief coming?
Damian
2021-01-16 00:59:42 +0000 UTCIn his AR setup video (on YouTube) he talks about them and likes them. I have it on my patrol rifle and I really like it.
Thomas
2021-01-15 19:34:28 +0000 UTCThoughts on 45* safety? Worth the hype?
Paul Jankins
2021-01-15 17:54:30 +0000 UTCGreat Video. Thanks!
Jeff Gianelli
2021-01-15 17:29:06 +0000 UTCRelative to MOUT/CQB opps, I know you prefer the high-ready position (from the Taran Tactical/Keanu training); is your safety manipulation process the same in this environment or from high-ready? ...You may have touched on this in previous Tube videos..? In my Infantry days, I was trained to safety off into action, safety on out of action going into either high or low ready...
Nicholas Davis
2021-01-15 06:43:52 +0000 UTC