MultiFunPlayer v1.28.4 - Patreon build
Added 2023-12-10 19:53:10 +0000 UTCBelow you can find a download link for Patreon only build of MultiFunPlayer v1.28.4
The SelfContained build contains all dependencies and should not require any updates to .NET or VC++. You can use it if the normal build does not run for you and/or you don't want to update .NET.
The archive is password protected (requires 7Zip or WinRar to extract), you should have received the password in your welcome email, or in a message I will be sending to every patreon after this post is published. If you didn't receive the password feel free to contact me on Patreon or Discord.
Full changelog: https://www.patreon.com/posts/94431735
Download: https://mega.nz/folder/IL11SLjB#GbU8ATivxtCTZAULZ5stJg
Quick HOW TO for SLR:
In DeoVR:
- Make sure you have valid SLR subscription with script streaming, and that you are logged in
- Make sure you have Interactive -> Connect to SLR Interactive (older DeoVR versions) or Haptics -> Connect to Haptics Connect (newer DeoVR versions) enabled in settings
- Make sure you have Developer -> Remote control enabled in settings
In MultiFunPlayer:
- Click on DeoVR tab, if its not visible click on the top-right "plus" button and then click "DeoVR" button to add it
- Click on SLR Interactive button on the toolbar just below DeoVR tab
- Enter valid SLR credentials (if credential fields are greyed out, disconnect DeoVR first)
- If you installed DeoVR on your VR headset (like a quest) you need to expand DeoVR settings by clicking the arrow button on the right side of the toolbar and change the default IP (127.0.0.1) to your headset IP
- Connect to DeoVR by clicking the play button on the toolbar, SLR Interactive will auto-connect and should turn green
Comments
Any reason you cant load local scripts? But assuming you have xbvr running on the same pc as MFP you just have to enable xbvr repository in MFP (button on the opposite side of the play/pause button), and in DeoVR go to http://localhost:9999/deovr or http://127.0.0.1:9999/deovr
Yoooi
2024-01-19 15:37:46 +0000 UTCIs there any instruction on how to use the MFP with DeoVr and Xbvr? I can't load any local scripts.
CRM Labs.
2024-01-19 14:42:01 +0000 UTCFastest to get started would be to use USB cable and serial output which can be added via the bottom right plus button, after adding expand its settings and select a com port (probably the lowest one will be SR6). For long term you would probably want to switch to UDP output to connect via wifi, but you need to have custom firmware for that if your SR6 does not have it.
Yoooi
2024-01-16 17:02:38 +0000 UTCperfect. Now if only i can get my SR6 to actually do the scripts in the video!!
Captain Fett Cosplay
2024-01-16 16:29:00 +0000 UTCIf you use DeoVR on quest you need to expand DeoVR settings in MFP and change endpoint to your quest IP.
Yoooi
2024-01-16 16:10:19 +0000 UTCI have done exactly as this guide shows, but I get this error when I try to connect to SLR thru this program - DeoVR failed with exception: System.Exception: Could not find a running DeoVR process. at MultiFunPlayer.MediaSource.ViewModels.DeoVRMediaSource.RunAsync(CancellationToken token
Captain Fett Cosplay
2024-01-16 16:05:55 +0000 UTCUnless I misunderstand EDI is used for games, I dont see how it would be usable with MPF, you can just use buttplug output which supports every device you would want.
Yoooi
2024-01-10 20:45:15 +0000 UTCThank you for update! Is it possible to add support for EDI? https://github.com/NoGRo/Edi That will open up a lots of possibility
Kai Yami
2024-01-10 20:10:33 +0000 UTCYea, was about to post it. I'm assuming SLR is broken too because of the bug.
Yoooi
2023-12-11 22:44:21 +0000 UTCheya, will you be posting a 1.28.4 patreon build shortly or the regressions are only for the public build?
Max Cash
2023-12-11 22:40:10 +0000 UTC
