Magnetic Capacitance Box! 4040 Fan Adaptor! Battlement Tower Update!

Magnetic Capacitance Box

The Capacitance Box for sleeved cards was a journey into tricky thread angles and tenuous security, and someone asked if it could perhaps have magnets instead! Of course, magnets are easy enough to add, but what I really wanted was a latch that would take all the forces, with magnets serving only to hold that latch in place, rather than experiencing any force directly.

And so we have this new, Magnetic Capacitance Box! Instead of a screw-thread handle there's rotating latch that hooks into the body, and magnet spaces are provided to keep that nice and secure. That said, it'll work pretty well even without the magnets. But it's much cooler with them :)

Optional magnets: four 6x3mm cylindrical magnets (as usual)

Oh, and you might notice that the outer design has also changed entirely on this one!

You'll find it under 509 Magnetic Capacitance Box

Link to dropbox post: https://www.patreon.com/posts/31697592

Fan Adaptor 4010 to 6015

The Fan Block Raspberry Pi cases were built to house a 6015 fan, but someone very reasonably pointed out that plenty of people have 4010 fans lying around as remnants from old printers. So, I made an unnecessarily complicated adaptor!

The slots through the interior block are intended to allow the fan cable to be routed out conveniently, and the front plate with gap is likewise intended to allow routing out that way!

So, you'll need to print one rear plate, one front plate, the middle block, and four bolts.

You'll find this one under 510 Fan adaptor 4010 to 6015

Link to dropbox post: https://www.patreon.com/posts/31697592

Battlement Tower V2

It turns out the original version of the Battlement Tower was misbehaving, and tended to have a messy line on the plane under the dice entrance.

That turned out to be a symptom of some nasty geometric issues, which needed to be resolved before that one little overhung line could be removed! But removed it was, and a few other things have been corrected around that area, mostly involving brickwork.

You'll find this one in place of the original version at 529 Battlement Dice Tower

Link to dropbox post: https://www.patreon.com/posts/31697592