Welcome to March! First Design Drop: Baby Fae Wolf Dragon!
Added 2025-03-10 19:00:07 +0000 UTCEDIT: 3MFs have been updated due to wall issues, please redownload if you do mulitcolor printing, otherwise you are good!
Hi Cinders!
Welcome to March 2025! Thank you all for being here and supporting me! I'm starting off the month with the BABY Fae Wolf Dragon, which is a baby version of the adult Fae Wolf Dragon released last year. There are 2 versions of this design: 1 with open pattern wings, and 1 with closed pattern wings. This dragon is a Supporter Exclusive as will not be made public!
We also are able to include a fun .3MF color file for each version!
Hope you all enjoy these!
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
Open Wings: Mika3D basic rainbow, Polymaker Starlight Twilight, Sunlu White
Closed Wings: Sunlu Black, Sunlu White, Flashforge Dreamy Trio
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
8 Design Drops - March 2025 Models: HERE
Baby Fae Wolf Dragons - EXCLUSIVE - RELEASED
Closed Pattern Wings Version
Open Pattern Wings Version
(4) .3MF Color Files
Secret Design
Secret Design
Secret Design
Secret Design
Secret Design
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
Slow down and use brims!
Tracy Francis
2025-04-17 18:52:37 +0000 UTChi, im new to this, I have downloaded the file and print goes great until it gets to the wings , do I need to use supports or is there something in the settings I need to change. but looks amazing except the wings.
Sharon Morris
2025-04-17 13:20:57 +0000 UTCi had to download
Savanna Hallford
2025-03-30 13:17:10 +0000 UTCYou can ignore the warnings and print as is
Tracy Francis
2025-03-30 00:45:50 +0000 UTCThe post says no supports needed, but I cannot even get Orca to let me save the file because it keeps saying I need supports for the open wings? Should I be orienting the design a specific way? This is for the single color file. Yes, I just downloaded the newest available download. Thank you!
Jennifer
2025-03-29 22:51:43 +0000 UTCThank you it looks like my internet was down for some reason and it working again.
Sam
2025-03-27 17:01:31 +0000 UTCI'd make sure your browser isnt blocking popups or downloads!
Tracy Francis
2025-03-27 16:57:30 +0000 UTChello i just joined today and im having a hard time finding the baby fae wolf link. Im trying to print one now and when i click on the link it wont download for me.
Sam
2025-03-27 16:37:41 +0000 UTCThank you!
Snail and Rabbit’s Workshop
2025-03-25 22:45:09 +0000 UTCIt has 4 colors, make sure your slicer is set up for all 4 colors, you may need to adjust the eye color but that takes two clicks :)
Tracy Francis
2025-03-25 22:41:03 +0000 UTCIn the files it lists one of them as a 4 color version. But I when i open the file there are only 3. Was there another version that just didnt get added to the collection that does have 4 colors?
Snail and Rabbit’s Workshop
2025-03-25 22:33:30 +0000 UTCCheck your cooling
Tracy Francis
2025-03-18 03:52:06 +0000 UTCI keep having issues with the Balls of the wings fusing to the body. Any help? Thank.
Medic3936
2025-03-18 00:37:51 +0000 UTCIts attached to the post, Patreon may be hiding it however, you may need to click the title and go to the actual post :)
Tracy Francis
2025-03-16 21:47:06 +0000 UTCYep, you can re-paint it as you see fit!
Tracy Francis
2025-03-16 21:46:37 +0000 UTCIs it possible to paint the wings for the closed wing version? I wanted to add a fourth color to the mix, and cannot figure a way to modify the colors in-between wings.
A Mudder
2025-03-16 17:41:43 +0000 UTCi was a member of cinderwing a few years ago. and i know it may be a silly question but how do i download the files?
nikki whaley
2025-03-16 02:32:05 +0000 UTCOne is a 2 color one is a 3/4 color. You can always adjust the paint job as you need with the fill tool!
Tracy Francis
2025-03-13 16:39:01 +0000 UTCSounds about right for that printer
Tracy Francis
2025-03-13 16:38:36 +0000 UTChey all i have a ender 3 v2 and its saying its going to take 34 hours as anyone else got this printer?
Nicola Simpson
2025-03-13 16:33:11 +0000 UTCit looks like there is a 2 color version on the picture but it is not included?
Muffina
2025-03-13 12:45:09 +0000 UTCOhmygosh! Absolute new favorite! These are GORGEOUS!
Aimee Riha
2025-03-13 00:00:43 +0000 UTCI have 4 hours left on mine
Nicole
2025-03-12 11:20:08 +0000 UTCLove this one so much!
Laura McLellan
2025-03-11 23:27:50 +0000 UTCOw ok xD, thanks for clearing this up for me :p
Richard Noordhuizen
2025-03-11 20:29:58 +0000 UTCSince folks seem to be having issues, STLs/ZIPs are attached to the post. Patreon can hide the attachments however and you may need to click into the actual post and hit "Read More" to see any attachments. This is a UI issues with Patreon I have no control over.
Tracy Francis
2025-03-11 19:52:51 +0000 UTCPlease feel free to message me for help :)
Tracy Francis
2025-03-11 19:51:44 +0000 UTCThey are attached to the post, Patreon has a tendency to hide it. Particularly on the app. I promise it's attached to the post :)
Tracy Francis
2025-03-11 19:51:30 +0000 UTCIt is 4 colors, if you want black eyes :)
Tracy Francis
2025-03-11 19:50:38 +0000 UTCI just downloaded the files. Noticed that the 4 color version is actualy 3 color . Very beautiful models !!
Richard Noordhuizen
2025-03-11 14:24:51 +0000 UTCyeah im looking myself
Kelly Dallow
2025-03-11 02:33:01 +0000 UTCsame here haven't been able to download anything since January
Charles Hunt
2025-03-11 00:28:36 +0000 UTCi am printing mine right now! its candy pla silk see yall in 6 hrs
James
2025-03-11 00:22:15 +0000 UTCI cant find it either
Tisha Whitney
2025-03-11 00:14:10 +0000 UTCSo confused right now, where do i download
Simon Davies
2025-03-10 23:57:39 +0000 UTC😍🥰
Lisa
2025-03-10 21:48:22 +0000 UTCI found it lol
Melissa Stapleton
2025-03-10 21:45:24 +0000 UTCHow do we download? I dont see the links. Sorry Im still new! :)
Melissa Stapleton
2025-03-10 21:43:50 +0000 UTCAs always a amazing design by y’all!
Ace High
2025-03-10 20:17:31 +0000 UTCdaughter has now requested this
WildWest3D Creations
2025-03-10 19:30:33 +0000 UTCI love it!!
Nicole
2025-03-10 19:21:21 +0000 UTCSweet
Maddog M
2025-03-10 19:16:38 +0000 UTCYESSSS!!! 😍
Cat's Paw 3D
2025-03-10 19:10:57 +0000 UTCSo VERY cute, and creative!
Kassandra Creates
2025-03-10 19:03:11 +0000 UTCYes!!!!
Yoriko Rayne
2025-03-10 19:02:42 +0000 UTCYes!!! Its so cute!!
JMac Creations
2025-03-10 19:02:27 +0000 UTCBeautiful!!!!!
Brian Jett
2025-03-10 19:02:13 +0000 UTC
