Crystal Dragon 2025! + MEGA! Cinderwing3D THREE YEARS!
Added 2025-01-17 23:09:26 +0000 UTCEDIT: Updated 300% Dragon so it does not have a weird first layer on the head.
EDIT 2: Want to cut your own? Here's a how to by community member Jiggles!
https://youtu.be/pmw8WsGFGkc
I can't believe it's been 3 years since my first design: the Crystal Dragon!
Our Story
For eight years, my husband and I dreamed of starting our own business. Our ultimate goal was to spend our lives together and with our family, free from the constraints of the traditional 9-to-5 grind. We spent countless late nights fueled by caffeine, brainstorming and working on various business ideas, learning invaluable lessons along the way.
Despite our efforts, my husband continued to work a full-time job while I devoted myself to being a full-time mom. Around three years ago, we discovered the fascinating world of 3D printing and started our own printshop. While operating our print shop, I decided to explore designing—and that decision changed everything. It was then that the Crystal Dragon came to life.
To our amazement, it went viral within a week! That single design not only launched our business but also became a beloved favorite in our community. Even three years later, it remains one of the most popular creations in our lineup.
From the very beginning, one of our biggest goals has been to help others find the same freedom we have by building their own businesses. This vision inspired us to create a subscription model that grants commercial rights to our designs, allowing others to print and sell them for themselves. It’s been such a blessing to hear from people who’ve shared their success stories with us—whether it’s launching their own businesses or using our designs to make a difference in their communities. Some have even told us how these creations have positively impacted autistic children, which fills us with so much gratitude and joy.
We thank God everyday for the inspiration and impact this business has had on our lives and our community.
<<---------------------------------->>
I’ve learned so much since creating my first designs, and over time, I’ve refined features like connecting links and other key aspects. The original Crystal Dragon still uses the original links, which don’t print as smoothly or cleanly as the updated designs.
To celebrate three incredible years of Cinderwing3D, I’m thrilled to release a 2025 updated version PACK of the original Crystal Dragon! This updated version incorporates some of the latest dragon design enhancements while staying true to the charm and spirit of the original.
Yes, you heard that right—PACK! Along with the 2025 updated version of the Crystal Dragon, we’re excited to include a few extra surprises, made possible by our incredible team of testers. Thanks to their efforts, this pack includes (6) .3MF multi-color files and (2) MEGA Crystal Dragon files scaled to an impressive 200% and 300%!
A heartfelt thank you to everyone whose incredible efforts helped bring these fun bonuses to life!
Mega Dragons: Cut by DonumExMachina
Paint Jobs (Alt 1-3): By SledgePainter
Paint Job Colors: By Admin Jazzy
Your contributions made this release truly special!
<<------------------------------------>>
NOTES and Assembly of the Mega Dragons:
200% is on 4 plates and around 800g of filament, should come out to around 5ft/1.5m
300% is on 11 plates and around 2,700g of filament, should out around 6.7ft/2m
Each plate has a cut loop with pegs and a matching loop remainder with holes.
Once printed, you need to connect the pieces together by putting a dab of super glue in the hole part and connecting it around the other link. (It is suggested that you test the loop connection of each piece before gluing it together.)
Depending on your printer the 300%’s pegs may need supports. Highly recommend checking your cooling is at 100%, and recommending crosshatch, gyroid, or 3d honeycomb for infill. 2-3 walls at 5% infill due to the size and scope.
This is a SPECIAL one time thing in celebration of the Crystal Dragon's anniversary and will most likely not be an including thing for future models. That being said we hope this inspires you all to make some mega dragons!
All cuts were made using Bambu Studio/Orca Slicer's cut tools. https://wiki.bambulab.com/en/software/bambu-studio/cut-tool
-Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
300% Mega: Ziro Rosey Cloud
2 Color: Sunlu White, Mika3D Popular Basic Rainbow (Same as Original Crystal Dragon)
Single Color: Ziro Glacier
-----------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
January 2025 Models: HERE
Baby Unicorn Dragon - RELEASED - EXCLUSIVE
(1) .3MF Color File
Baby Alicorn Dragons - RELEASED
Wings
Wingless
(2) .3MF Color Files
Tiny Snails - RELEASED
Rose Snail
Strawberry Snail
(2) .3MF Color Files
Tiny Rose Dragon&Wyvern - RELEASED - EXCLUSIVE
Tiny Rose Dragon
Tiny Rose Wyvern
Tiny Rose Dragon Keychain
Tiny Rose Wyvern Keychain
(3) .3MF Color Files
Rose & Crystal Fidget Spinners - RELEASED
Rose Fidget Spinner
Crystal Fidget Spinner
Heart Cookie Dragon - RELEASED - EXCLUSIVE
(1) .3MF Color File
Tiny Chocolate Strawberry Snail - RELEASED - EXCLUSIVE
Snail with Lines
Snail with NO Lines
(2) .3MF Color Files
BABY Heart Cookie Dragon - RELEASED
(1) .3MF Color File
Cookie EGG - RELEASED - EXCLUSIVE
(1) .3MF Color File
Skunk - RELEASED
Skunk without Rose
Skunk with Rose
(3) .3MF Color Files
Tiny Butterfly Dragon - RELEASED
Tiny Butterfly Dragon
Tiny Butterfly Dragon Keychain
(2) .3MF Color Files
2025 Crystal Dragon - RELEASED - EXCLUSIVE
2025 Version Crystal Dragon
200% Mega
300% Mega
(6) .3MF Color Files
Secret Design
MOD Bonus
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
Check your cooling and overhangs! Since its a P1S, I always recommend opening the door!
Tracy Francis
2025-05-24 05:06:25 +0000 UTCNeeding some suggestions, I am trying to print this in the Bambu P1S and the joints are too tight. Would you have any suggestions in settings to resolve this issue?
daniel chrisco
2025-05-24 03:17:39 +0000 UTCSplit to objects!
Tracy Francis
2025-05-11 21:17:08 +0000 UTCWe printed at 70%, but the final connector piece isn't snapping together. Is there a way to print just the little piece at 71% without printing that portion of the tail?
Allison Laera
2025-05-11 20:57:50 +0000 UTCI liked it a lot. 😀😀😀😀. I had no problems. how do you do it?
Bryan
2025-05-04 23:15:12 +0000 UTCThere is not
Tracy Francis
2025-05-04 19:17:47 +0000 UTCIs there a straight version of the dragon?
Thomas
2025-05-04 05:38:07 +0000 UTCI just printed the 200% and 300%. Zero printing issues. Absolutely beautiful and painless process. I superglued the connecting pieces together. These are amazing! Thank you! I would love to see more of these mega prints!
Joshua Sands
2025-04-22 16:14:18 +0000 UTCLike in the photos? Its just the 2 color with raimbow filament :)
Tracy Francis
2025-03-23 21:59:22 +0000 UTCAny idea if the Crystal dragon 2025 at 100% has a 3mf to download with the rainbow body and white spikes please? Not in the downloads
Debbie Hardy
2025-03-22 01:23:47 +0000 UTCPer the post I recommend 5% gyroid infill :)
Tracy Francis
2025-03-17 23:56:15 +0000 UTCi cant get nowhere near the 800g filament estimate for the 200%. even at 2 walls im at 950g. if i make it 3 walls then i am almost 1150g. and thats at .2 layer, 15% gyroid infill. Am i doing something wrong?
Fred B
2025-03-17 23:32:13 +0000 UTCjust finished printing the 300 % it measures out to 71" long
matt bowman
2025-03-17 22:44:56 +0000 UTCIt'll vary based on settings and filament, the best thing you can do is slice is for an estimate!
Tracy Francis
2025-02-25 06:49:38 +0000 UTCFor anyone who’s printed the 300% Dragon. Can anyone tell me an approximate weight for display purposes?
Braden Toms
2025-02-24 12:48:55 +0000 UTCwhy not just do the 300% then? The pieces gradually go down in size, so I think it would be noticeable.
Stephanie Campbell
2025-02-21 12:48:31 +0000 UTCJust completed the 300% and I am in love with it!
Stephanie Campbell
2025-02-21 12:47:18 +0000 UTCI am known to miss things, but I've combed the post multiple times and I just don't see it.
Emma Liz
2025-02-20 19:35:04 +0000 UTCNo, as stated in the post, this was a one time thing! You are welcome to cut it up yourself however!
Tracy Francis
2025-02-19 04:39:35 +0000 UTCis there by chance a 300% with wings? I printed the first 300% and would love a flying friend! =)
Trent Lilly
2025-02-19 01:00:31 +0000 UTCThank you.
Skye Blackledge
2025-02-19 00:34:12 +0000 UTCIt can scale safely between 60-100% :)
Tracy Francis
2025-02-19 00:17:25 +0000 UTCHas anyone tried a scaled down version 90 or 80%?
Skye Blackledge
2025-02-18 22:59:27 +0000 UTCJust finished printing the 200% in 1 color and when I sliced it to send to the printed didn't catch it had a prime tower (it had to do with the Timelapse ) and because of that I ran out of filament 15 minutes left on the print lol luckily I ordered a new roll before bed as a just in case and I couldn't wait for amazon to get here today to finish lol
noel laurence
2025-02-08 21:42:21 +0000 UTCI tried it at 75% with a .6 and I would say it came out "gummy" -- the joints don't move well, and there are little balls of filament on top of the foremost horns. I suspect it would work much better at full size or 200%, etc., though.
Matt Smaus
2025-02-08 14:05:53 +0000 UTCIt should print fine with that
Tracy Francis
2025-02-08 00:24:09 +0000 UTCCan this print with a .6 nozzle, or do you have suggestions for how to change the settings in Bambu Studio to ensure it will print with a .6 nozzle?
Matt Smaus
2025-02-07 23:49:35 +0000 UTCDoes anyone know on the 200% crystal dragon if I wanted to make it a bit longer could i print two of plate 3 or would it not connect correctly then?
Justin Revel
2025-02-06 00:08:36 +0000 UTCI ended up opening it on my chromebook just in case, and it was fine. Thanks for the awesome models.
Zach
2025-02-06 00:04:03 +0000 UTCYou can find it on cults3d and myminifactory. Sorry for the late reply :)
Zach
2025-02-05 23:20:57 +0000 UTCThey are just plain old STLs and 3mfs, it's a false positive :)
Tracy Francis
2025-02-05 23:20:39 +0000 UTCMy computer said these files could be harmful to my pc.
Zach
2025-02-05 23:13:53 +0000 UTCDoes the 300% dragon require supports on the connectors?
PocketPrints 3D
2025-02-05 17:34:30 +0000 UTCThey are already :)
Tracy Francis
2025-02-03 00:38:54 +0000 UTCCould you include the stl files separately for each?
Clueless Jane
2025-02-03 00:01:10 +0000 UTCCan I request an additional body piece option to elongate the body between the feet on the 300 & 200 files? Pleeeease :-)
Kim McKenzie Knittig
2025-02-02 17:09:52 +0000 UTCIs it normal that it just looks like a gigantic blob for me?
Clueless Jane
2025-02-02 16:50:11 +0000 UTCIs there any plan to make a short tailed version?
Stephanie Figard
2025-02-02 16:18:20 +0000 UTCHonestly, you are just rolling the dice on it. Make sure each plate is directionally oriented correctly. I don't have the stl pulled up right now but as I remember it it the body sections was oriented similarly enough to get a pretty consistent look... it won't be perfect with the curves but that variance is consistent so it might actually add to the look. If you don't like that you might have to manually straighten the pieces up. Be sure the head and legs are also directionally correct/matching the other pieces direction on the plates. That is all tou can do related to the model and its slice... The other trick is to have 2 rolls that are rolled the same way and are neatly rolled. That can be a challenge. The last challenge is making sure the filament hits the hot end the same way on your load of the second reel when it happens. It could be just luck... or of you are using A1s without and AMS you can note the how the filament is entering the extruder on the first roll Just pull up the the ptfe tube out of the top where in enters the printhead/extruder and take note if the orientation. You can replace the ptfe tube until that reel runs out the when you load the second reel pull the tube again during that process and manually make sure that the filament enters exactly the same way. Even so... the filament could have a twist on the reel or just slowly twist over time as it's loaded. There are no guarantees. This is why solid or multicolor prints might be better that bi or tricolors co-extruded). If you manage to pull off a tricolor or even a gradient over 11 plates you will have reached goat tier. I am printing a single color test run but I am tempted to try a tricolor too. love to here how it works out!.
Ron Barrett
2025-01-30 02:16:51 +0000 UTCI did 4 on my A1 at 60% and they are 40 minutes out. Gyroid, 15%, no brims
AK Creations
2025-01-29 11:26:14 +0000 UTCI have no plans to at this time since the Crystalwing works as is :)
Tracy Francis
2025-01-28 21:53:39 +0000 UTCI just wanted to say thank you for your beautiful designs and artistic greatness! You changed my life 3 years ago and finally gave me the direction I wanted to go in my business. If I hadn't found you, I may have never continued to move forward. I appreciate all your hard work!
Lioness2000
2025-01-28 21:39:04 +0000 UTCDid it work when you tried it on gyroid? I’ve had 6 prints fail printing it at around 60% with gyroid set on two different bambu lab printers. Weird thing is I can print it at 70% just fine. Any bigger and it fails. (This is for the regular sized dragon not the large ones)
Kelly Houlahan
2025-01-28 15:49:38 +0000 UTCCan you please make a winged version of this 2025 one? I printed it and realized it was the non winged version. OOPS lol
Emir Yildiz
2025-01-28 10:10:01 +0000 UTCI'm getting ready to print the 200% dragon anyone have any issues with the glue holding the weight of the dragon together. I plan on using a super glue called loctite super glue works pretty well on other filament things I have just wanted to know what glue was anyone using or if they had an issues with the rings staying together with the rest of the weight of the dragon. Thanks
Brian Frederick
2025-01-26 04:31:38 +0000 UTCWhat slicer are you using?
Tracy Francis
2025-01-26 01:26:56 +0000 UTCWhere can I find it? I’ll happily pay for it!
Samantha Smith
2025-01-26 00:42:08 +0000 UTCYou have to pay for it :(, But it is a cool model that I paid for and would recommend
Zach
2025-01-25 23:48:59 +0000 UTCHappy note for all of you trying to get every last gram out of your filament. If you follow the recommendation to print the 300% at 5% infill, the total filament is a little more than 1.8kg, the 2.7kg is with the 15% infill. I bought four rolls, and I am getting two 300% dragons from it! Gyroid, 5%.
Ian Bergeron
2025-01-25 23:03:16 +0000 UTCHi! Is there a baby crystal dragon with wings version anywhere? :)
Samantha Smith
2025-01-25 22:00:08 +0000 UTCgood to know but disappointing i wont be able to do the 300%
Elizabeth Rapp
2025-01-25 21:30:12 +0000 UTCMine wont even let me open it. Im getting a unhandled unknown exception ; terminating the application message whenever I open it up. Ive already tried deleting the file and re-downloading and it still isnt working
Sierra McGuire
2025-01-25 20:00:30 +0000 UTCYes you need glue!
Tracy Francis
2025-01-25 18:05:57 +0000 UTCI 100% had it on grid. Crap. I didn't even realize I had it on grid to be honest. Whelp time to try on right infill
AK Creations
2025-01-25 17:34:40 +0000 UTCI can not wait to print this! My nephew is going to freak out...if/when I decide to give it to him. lol
John Garcia
2025-01-25 16:37:22 +0000 UTCCheck you're not on grid infill. Had 2 fails around the same spot start at the tail. Couldn't figure why. Came back reading over the release and seen recommended infill. Changed to gyroid and printed fine.
Bio
2025-01-25 16:35:56 +0000 UTCon printing the part with the dragon head, I woke up to my printer being "paused" like someone had pushed pause. When i tried to resume the print, the nozzle just went to the print and sat there, it wouldn't print no further. It was stopped at about 10 hours with 2 hours left. I had to scrap the part because it would not continue, im not sure if thats what you experienced. But I switched it to a different printer and finished it after starting it all over again.
dustin stewart
2025-01-25 07:27:43 +0000 UTCwhats the easiest way to put the rings together, my big fingers don't have much room to squeeze them together. And do you need to use glue?
dustin stewart
2025-01-25 07:21:09 +0000 UTCI've had to fails right at the 60% mark on regular print. Anyone else having any issues?
AK Creations
2025-01-24 22:21:15 +0000 UTCYou can use the cut tool to split the rings from the dragon. Each ring is specific to each plate so I don't want to add a lot of files and make it more confusing than it already is
Tracy Francis
2025-01-24 19:52:08 +0000 UTCOn a few plates I've had the half ring fail, not sure what caused it... Went back, split to parts, and was able to just print the ring - however, I noticed the dragon part falls apart, like the little pegs just drop to the plate bottom. Can we get a file version that's just the dragon and just the half ring?
Mike Sprague
2025-01-24 13:33:49 +0000 UTCok thank you so much. Did you just use regular super glue to put it together
Carol
2025-01-24 01:53:08 +0000 UTCthe instructions are in the post :)
Tracy Francis
2025-01-23 21:06:32 +0000 UTCjust start with plate 1 (head) and then the tail is from 2 (starting at the head) to 9 (tail end). 10 plate are the first feets, near head) plate 11 are the feats more to the tail end
Yves Tremp
2025-01-23 13:59:13 +0000 UTCI just finished with no support and no brims, Bambu slicer, with any changes on setting, its just beautiful
Adrianna Chinea
2025-01-23 04:08:03 +0000 UTCI just finished with no support and no brims, Bambu slicer, with any changes on setting, its just beautiful
Adrianna Chinea
2025-01-23 04:07:35 +0000 UTCI'm guessing it's probably been asked already, but I didn't want to look through over a hundred comments, but is there instructions on how to put the 300% version together, or is it just the order of the 11 plates? Thank you.
Tommie Staples
2025-01-23 03:58:02 +0000 UTCOK I ordered 4 rolls to print the 300%. Here's my question, lol i'm new at this. I'll be printing on a bambu A1. Will i need to change anything as you mentioned supports lol. Help a new girl out
Carol
2025-01-23 02:21:08 +0000 UTCHas anyone printed the 200% or 300% on Kobra 3 yet? if so, did you change any of the settings and did u have to scale down each plate of the 300% down to 97%?
Suzanne Landry
2025-01-23 02:13:22 +0000 UTCIt was already updated back when I updated ALL the eggs :)
Tracy Francis
2025-01-22 19:38:20 +0000 UTCWhere can we get the updated Crystal dragon egg? I have the original that has the older locking mechanism. I'm sure there was a post months ago about a newer version :)
Mark Watt
2025-01-22 17:28:10 +0000 UTCI'm doing the 5 ft dragon and I have 2 multi color roll. How will it match the color changes if your doing it in four sections and putting it together. Say your color change is purple blue red on one multi color roll. How will the 4 sections match up. It wont will it?. I hope this makes sense.
WoodGuyzzzz@gmail.com
2025-01-22 14:40:12 +0000 UTCThank you so much I loved the mega scale ones did the 200% one in a tricolor now using the mega layout on how the parts were i am working on a 200% scale rose dragon
Stephen Zuschlag
2025-01-21 17:48:16 +0000 UTCIf I had the filament I'd 100% be making one of the giant ones!
Gemini Wolf Gamer
2025-01-21 17:47:38 +0000 UTCIts pretty easy to paint yourself! That was part of the redesign, to make it easier to paint :)
Tracy Francis
2025-01-21 17:15:39 +0000 UTCwould love to see some of these completed 5' and 6' dragons
Michelle T
2025-01-21 16:32:59 +0000 UTCGreat work I know you are busy is there a chance of getting a 300% head 3mf with the eyes and teeth colored I'm working on the first 300% now and next one wanted to do the multiple colored head.
JACKPOT 3D CREATIONS
2025-01-21 10:10:23 +0000 UTCMine is taking 2.5 roles with 3 wall loops, 5% infill, and crosshatch on the P1S.
Ed Sechrist
2025-01-21 05:09:48 +0000 UTCI love Amazon. Had to order 3 of the same color rolls of filament. Ordered right after seeing this release on Saturday I ordered and it came Sunday. Even with 2 printers I still have 3 plates to print for the 300% dragon. This is exciting!
Ed Sechrist
2025-01-21 00:09:52 +0000 UTCI was want to put it on our Neptune 4 plus so it would fit, my ams printers are smaller and I had to shrink it to 85%. I wanted to print it the full 200%.
ruth knag
2025-01-20 15:18:12 +0000 UTCWhat printer do you have? Does it have an AMS?
Zach
2025-01-20 15:12:15 +0000 UTCWhen you coming back to MLB ? 😁
Mark
2025-01-20 04:01:22 +0000 UTCCan only do 150% with my flashforge adventurer pro 5, but loving it so far! Only have the head printed. Will be a great display dragon for craft shows!
Renee villard
2025-01-20 03:45:49 +0000 UTCMine came out to 54 inches long
Billie
2025-01-20 03:26:23 +0000 UTCim getting ready to start a 200% but it wont let me put it on my single color printers, what couls i be doing wrong?
ruth knag
2025-01-20 03:12:36 +0000 UTCThe short tail file existed due to folks having issues printing the tiny little links on the OG Crystal Dragon. This dragon doesn't have that issue so there was no reason to make one :)
Tracy Francis
2025-01-20 01:33:58 +0000 UTCWhat about short-tail file?
Nancy
2025-01-20 01:32:39 +0000 UTCThanks 😊
Backdraftwarrior67
2025-01-19 22:10:52 +0000 UTCitll depend on your settings but it'll be 2-4 rolls of PLA
Tracy Francis
2025-01-19 21:42:25 +0000 UTCyou would of loved the mega lunar dragon I did last year. it was 4 feet and multi color.
Trevor Bauer
2025-01-19 21:37:16 +0000 UTCDoes anyone know how much filament is needed for the 300% Dragon print? Thanks
Backdraftwarrior67
2025-01-19 20:49:15 +0000 UTCAmazing Story. 3D Printing Changed my life as well! I was a personal trainer, with my own gym, forced out of business by Phil Murphy, during "Covid" lockdowns. Surviving on Doordash, and instacart, I got my 1st 3D Printer, a dream I had for many years, on sale..... It changed EVERYTHING. However, creating art like this, from thin air.... detailed dragons with wings, and teeth and all that. Not a chance. I can barely make a cube.
Gregg Adventure
2025-01-19 20:31:55 +0000 UTCGreat story...My family is right behind your family's tailwinds to do the same!! My daughter has been dreaming of a "HUGE" dragon and I too started to think about how to accomplish this. We're on the wavelength here. Keep it up.
Charles Kiesow
2025-01-19 20:29:46 +0000 UTCLoad them up and see!
Tracy Francis
2025-01-19 19:41:45 +0000 UTCNo sorry!
Tracy Francis
2025-01-19 19:41:39 +0000 UTCYou don't, unfortunately. There's no real way
Tracy Francis
2025-01-19 19:40:15 +0000 UTChow would the gradient filament stay lined up across multiple plates?
Tim Belton
2025-01-19 00:42:14 +0000 UTCMy PETG version
Bob Bunge
2025-01-18 22:17:32 +0000 UTCNo idea yet. Plate 1 is still printing and have the other 3 to print yet. She says in the post that it’s like 5 feet long I believe
Michele
2025-01-18 21:52:47 +0000 UTCHappy Birthday 🎂! Your story is beautiful and so inspiring 💖 Here, it's also an adventure I share with my husband, the first printer was his; the poor man doesn't print much anymore 😅 Your success is fully deserved and I am very proud to speak and showcase your work with my clients, you are a true artist 🖌✨️
Ohana Factory
2025-01-18 21:32:49 +0000 UTCCan we get a resin printer orientation like with the original crystal dragon?
Heather. Jackson
2025-01-18 21:25:06 +0000 UTCWhat is the difference between the 6 3M color files
Tammy Null
2025-01-18 20:26:48 +0000 UTCThank you so much cinderwing you've been rocking this year so far. Happy 3 years & to many more.
Zach Roth
2025-01-18 20:14:12 +0000 UTCHow long is the 200% dragon?
Zach Roth
2025-01-18 20:12:45 +0000 UTC300% dragon here I come. I'm so excited! I order the filament yesterday, did some extra painting today, and it's sliced and ready to print pending filament delivery tomorrow. 11 plates, 296 hours to print. Wish me luck!
Cathy
2025-01-18 19:50:14 +0000 UTCThis looks so awesome!!!
River Wilmoth
2025-01-18 18:26:22 +0000 UTCThis is awesome! I started setting up a 300% dragon a few months ago, but never got around to finishing all the cutting. Now I can finally get that printed :-)
Jill Foster
2025-01-18 16:23:29 +0000 UTCSo excited for my 200% one to finish. Will need to order filament for the 300% one. lol
Michele
2025-01-18 14:55:40 +0000 UTCSo much this month! I still remember Joel Telling the 3DPN showing the crystal dragon he printed. That's when I joined your Patreon.
Gerhard Grobler
2025-01-18 13:07:35 +0000 UTCSo much fun this month! Thanks for all your hard work this is awesome
Stargazr69
2025-01-18 12:27:34 +0000 UTCHappy anniversary! I am happy to be here for 2 years thank you so much for so much nice dragons. I also have already mak a 450% large crystal dragen XD
NoLimit3D
2025-01-18 12:06:48 +0000 UTCHappy anniversary! I'm so happy to have been along for almost half of these 3 years now. My business started out with your designs, the Crystal Dragon in particular. So thank you for this awesome update! Greetings from the Netherlands
Sheila Sjeu - Mooi3D
2025-01-18 11:15:07 +0000 UTCThank you so much. We love your dragons, and seeing the kids faces when they find their new homes 😊
WishingRose
2025-01-18 09:51:27 +0000 UTCAbsolutely not a problem, no harm in asking. Wasn't sure how easy or hard of a task it was or how long it would take. Appreciate you getting back to me so quickly though. Thanks 👍
FAN3DP
2025-01-18 09:15:05 +0000 UTCa dream comes true, already started printing!😍
Yves Tremp
2025-01-18 08:45:29 +0000 UTCCongrats on the 3 years. Looks like I’ll be putting the k1 max to use, best get buying more filament…… goodbye Etsy profit 😂😂😂😂
Kristoffer Wallace
2025-01-18 06:08:45 +0000 UTCGoing by how the model is cut, it looks like we can make the tail as long as we want... I think things might get a bit ridiculous over here lol.
OmegaEntityBlue
2025-01-18 05:31:15 +0000 UTCI have one i made set at 494% !!!!! Absolute biggest I could print on the the X1C. Just the head is one plate! Absolutely soooo fun! Now I will have to do it for the updated version! And multi color!!!! YES
Samuel Goedhart
2025-01-18 03:50:20 +0000 UTCThere is no chance. They see very little use and I don't have the time to plate the dragons multiple different ways for it to barely be used! Sorry! You are welcome to re-plate it yourself if you like!
Tracy Francis
2025-01-18 03:12:32 +0000 UTCWhats the chances of having this in the straight format we had the original in. I have an Idea former ir3 v2 coming and this would be an epic first print. Thanks
FAN3DP
2025-01-18 02:58:02 +0000 UTCWelp. Guess I'm ordering more filament tonight (I just ordered something morning but I didn't factor this in). :) THANK YOU!
christina goodvin
2025-01-18 02:16:05 +0000 UTCThis is Awesome!! Thank You for all your hard work.
William
2025-01-18 02:03:24 +0000 UTCGenerally no supports but the 300% *MAY* need them on the connection points, as stated in the post!
Tracy Francis
2025-01-18 01:59:48 +0000 UTCLooks like it got my printers work cut out for them.
Moldy Kumquat
2025-01-18 01:43:30 +0000 UTCJust curious, will we need to add supports or are they like the rest and print without supports?
Jason Equia
2025-01-18 01:36:27 +0000 UTCCongratulations!! So happy for you!!
Lana Spires
2025-01-18 01:33:54 +0000 UTCHappy 3rd year!
Trisha Atchley
2025-01-18 01:20:29 +0000 UTCCongratulations 🎉 Thank you for the refresh and the mega size one, would make a good display piece for my retail shop :)
Nippon4U
2025-01-18 01:18:11 +0000 UTCOh big boy. How big was is the egg that would have to come out of?
John Goedeker
2025-01-18 00:51:50 +0000 UTCHappy Anniversary to you guys! Your prints and work is absolutely amazing! It was cool to hear about your back story too. We appreciate all the hard work everyone has been putting into making your prints so successful! I had asked last year about how to split up and enlarge a dragon and you were nice enough to give me the tips to walk me though. But I never did get around to printing it. SOOO guess what just got loaded onto our printer?!?! YES! The 200% one is going NOW! Thank you again for everything!
SilverWitch
2025-01-18 00:49:01 +0000 UTCKiss my my southern "Gritz" and lick you 3D Lips. I joined Patron CinderWing this morning after buying two CD files, wanting to learn more. And I did, the Chat / Blog / Sharing hopefully gets me out of the "birds nest \: in several of my 6 P1S. Just ordered 16 spools of your colors and looking forward to using the mu.
Thai2U
2025-01-18 00:48:33 +0000 UTCCongratulations on 3 years! I absolutely love your designs. I'm still pretty new to 3D printing and the MEGA crystal dragon will by far my biggest print ever. I can't wait to start printing. :)
Cathy
2025-01-18 00:39:46 +0000 UTCYou can also blow up the already multi colored one and piece it together like the ones done. It might actually be faster than painting from scratch 😅😂. I have spent and well continue to spend so much time painting all the current models too. Some are worse than others. But splitting to objects and cutting the Rings with connectors is soooo much easier!
Joshua Oliver
2025-01-18 00:33:58 +0000 UTCI just bought new colors of filament right in time for this oml... Congrats on 3 years!
Caitlyn Jardine
2025-01-18 00:23:13 +0000 UTCCongratulations on your 3 years. I'm printing 6 Pepe Le Pew with roses as soon as that's done. I'm printing the 6-foot dragon. Thank God i just received 20 new rolls of filament.
Armando Muniz
2025-01-18 00:13:49 +0000 UTCOf course...I just swapped in my .2 nozzle to print some minis for a buddy!
Mike Clark
2025-01-18 00:09:28 +0000 UTCThank you so much for all you do @ Cinderwing3D! Sending many blessings to you and your family!
Brandon Ryan
2025-01-18 00:01:41 +0000 UTCI can't wait to print this
Carol
2025-01-18 00:00:40 +0000 UTCO cool I was wayy of! I am ordering 3 rolls right now
ruth knag
2025-01-17 23:53:58 +0000 UTCI'll give it a whirl!
Stephen Pence
2025-01-17 23:51:58 +0000 UTCthe 200% will be about 1 roll, the 300% is about 2.5/3 rolls
Tracy Francis
2025-01-17 23:50:59 +0000 UTCO my. I'll have to check it out then. Sounds scary lol
Sean
2025-01-17 23:50:43 +0000 UTCIts fairly easy to paint yourself! This dragon was re-done from the ground up, including easier to paint crystals :)
Tracy Francis
2025-01-17 23:50:36 +0000 UTCIts split into multiple plates!
Tracy Francis
2025-01-17 23:49:53 +0000 UTCHow does one print at such scale? 🤯
Sean
2025-01-17 23:46:24 +0000 UTCCongrats on 3 years! Here is to many more years of bring your ideas to print!
Brian Jett
2025-01-17 23:45:43 +0000 UTCHappy 3 Year Anniversary! Our family is obsessed with your designs and of course the dragons! The first thing my kiddos do everyday when they get home from school is immediately start a new dragon, spider, or other critter design that is made from you! We are so excited to see what you have in store for 2025!
Aimee Riha
2025-01-17 23:42:31 +0000 UTCCongratulations on 3 years!!
Kaci Rhea
2025-01-17 23:42:23 +0000 UTCSuper excited for this. I have been waiting for this...
kim Sinks
2025-01-17 23:42:07 +0000 UTCdo you think there might, maybe, be a multi-color mega release? or is it there and i'm not seeing it?
Stephen Pence
2025-01-17 23:42:01 +0000 UTCSo am I figuring it right? Like 8 rolls?
ruth knag
2025-01-17 23:41:53 +0000 UTCOh boy, thought mine at 50" was big. Guess I get to go bigger on he next one
Anthony Reuter
2025-01-17 23:41:43 +0000 UTCHell ya!! Congrats on 3yrs!! And heres to many more years of designing amazing creations and many more years of marriage and success for you and your husband and kids!!! 🎉🎉🎉
JMac Creations
2025-01-17 23:41:33 +0000 UTCThank you so much for sharing your story, it's so beautiful and I loved reading it.
Tami Gardner
2025-01-17 23:40:29 +0000 UTCwow wow wow
Watkins 3D Creations
2025-01-17 23:38:18 +0000 UTCThat’s wild!!!!
James
2025-01-17 23:35:39 +0000 UTCOMG I am sooooooooo excited!!! I have been wanting this mega file forever!!! Thank you so very very very much for making it. Happy 3 year anniversary
Michelle McCoy
2025-01-17 23:33:08 +0000 UTCAn absolute unit of a dragon can't wait to figure out what filament im going to use for this
Andrewcooke Cooke
2025-01-17 23:32:57 +0000 UTCAnother assembly tip for holding the joints together while glue sets- you can stick some tape around the small piece, extra long so it give you some "handles" which allows you to maneuver it easier, and gives more leverage when you're trying to engage the joints!
Gerard Williams
2025-01-17 23:32:50 +0000 UTCOh. My. Gawd! A mega crystal dragon? WOW! I am definitely going to find the time and filament to print at least one of these. Also, congratulations on 3 years of the Crystal dragon! 🥳🎉🎊
Katherine Lawrence
2025-01-17 23:32:43 +0000 UTCThis was our first mega print too and it is surreal holding it! it's amazing!
Tracy Francis
2025-01-17 23:31:52 +0000 UTCHoly cow!!! How in the world!!! My eyes bugged out. LOL
CraftyMama
2025-01-17 23:31:35 +0000 UTCLOL OMG
Tracy Francis
2025-01-17 23:30:37 +0000 UTCNow the question is what's the best way to slice up an egg to fit it lol
joe Cool
2025-01-17 23:29:11 +0000 UTCI am stoked and terrified to print a mega dragon!
William Orton
2025-01-17 23:28:11 +0000 UTCJust me running to the printer 🏃♀️
Tiffany Daugherty
2025-01-17 23:27:18 +0000 UTCOmg i can't WAIT TO PRINT THIS!!
Abigail Petri
2025-01-17 23:25:33 +0000 UTCI'm new here, but you have definitely earned it. It took me days in to my 3D printing journey to find you, and I've been absolutely LOVING your designs. I'm so excited to see what you have in store for us!
Nick Morrissey
2025-01-17 23:20:14 +0000 UTCZomg I just finished making a 300% crystal dragon! I'm sure this one is much better than my cut job.
Gerard Williams
2025-01-17 23:19:59 +0000 UTCCan't wait to start printing the huge ones when the beds are done today. They are gonna be sick
Nathan Haynes
2025-01-17 23:19:04 +0000 UTC😱
Ika-Ita
2025-01-17 23:15:14 +0000 UTC
