Gingerbread Dragon!
Added 2024-12-04 00:32:18 +0000 UTCThis was a DECEMBER 2024 Design and has been Archived!
If you were subscribed in December you will receive an email from MyMiniFactory within the week to access the archived files from that month.
If you are starting your Subscription in JANUARY 2025, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the JANUARY Models will be in the JANUARY 2025 posts tab as they come out over the month!
https://www.patreon.com/c/cinderwing3d/collections
Hi Cinders!
Hope you all had a great holiday! I'm so excited to have you all here for DECEMBER 2024! This month is going to go a little differently! Since I have a few more models to release that are holiday themed, they will be releasing first in the month and as fast as we can possibly get them out to you! :)
Starting with December's Dragon: The Gingerbread Dragon!
PLUS Snowflake Cookie Keychain!
We have included a .3MF Multi-color file to really make the icing and gumdrops pop! (For my multi-color I made the gumdrops all the same color but the file has them separate) I decorated it with iconic icing snowflake cookies and designed the body to look like it had icing scales! I love it so much and I hope you all enjoy it!
Tracy
----------------------------------------------------
FILAMENT and Tools:
https://www.amazon.com/shop/cinderwing3d
Multi-color: Amolen Aged Brass, Sunlu White, Elegoo Silk Red-Green Dual
Single color: Ziro Moonlit Lake
Keychain rings: in store link above
-----------------------------------------------------
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
December 2024 Models: HERE
Gingerbread Dragon - RELEASED
Secret Design
Secret Design
Secret Design
Secret Design
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Link to the PUBLIC MODELS and Exclusives Full Index List:
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
Hello I can’t find the file ? It’s so adorable
Strawberry
2025-02-07 04:32:26 +0000 UTCWhat's not working?
Tracy Francis
2025-01-26 01:27:28 +0000 UTCit is not working
Chevetta Fitch
2025-01-25 20:15:16 +0000 UTCNo it has been archived, per the post :)
Tracy Francis
2025-01-11 03:10:37 +0000 UTCIs this not available now?
Aleks Brennan
2025-01-11 02:50:41 +0000 UTCThe model is 100% connected, something happened that shouldnt have if its in pieces
Tracy Francis
2024-12-28 00:44:17 +0000 UTCHow do you connect the 3 pieces for the body? I just printed it and it's not connected. I'm new to 3D printing and wasn't sure.
Cassidy Wagers
2024-12-25 16:19:35 +0000 UTCMaybe next year!
Tracy Francis
2024-12-22 02:40:14 +0000 UTCAny chance we could get a gingerbread egg?
Lee Cheek
2024-12-21 16:00:16 +0000 UTCIt took me 32 hours in a 3 color model I modified from the 4 color file.
Kilonova
2024-12-20 21:02:45 +0000 UTC34 hours at full size....
Alex Morales
2024-12-20 00:19:11 +0000 UTCDepends on settings and size!
Tracy Francis
2024-12-18 22:47:37 +0000 UTCHow long did it take to print the multicolor model? 1 - 2 days?
Alex Morales
2024-12-18 19:58:16 +0000 UTCthank you so much
Robbin Durbin
2024-12-14 01:46:32 +0000 UTCIts attached to the post!
Tracy Francis
2024-12-13 23:34:05 +0000 UTChi im new to this , and was hoping someone could tell me what i need to do to download this file so i can print one for my self.... any help is greatly appreciated
Robbin Durbin
2024-12-13 22:39:22 +0000 UTCWe need baby gingerbread dragons, omg hearts.
Zach Roth
2024-12-11 00:27:58 +0000 UTCThanks for the warning about the silk, I had not read it. My PLA's certainly stuck. First time I had to use a scraper to get PLA off a plate :) The SuperTack plate is excellent.
RickS
2024-12-10 01:21:29 +0000 UTCThose supertacks are no joke. Heed the warning, do not use silk on them!
fishbowl
2024-12-10 00:07:44 +0000 UTCI put it on my p1s at 100% 4 colors only 28 hrs. We will see if it comes out!
Bobette
2024-12-08 22:46:53 +0000 UTCI left it the size I downloaded it at, 100%. I just checked it in detail. Apparently Bambu Labs Studio kept the altered settings from my previous model. I just happened to be playing around with a Batcat Mask, and set the wall loops at 4, layers at 1.2, supports and other stuff that makes it much slower (and I didn't want). It's 13% done so I guess I'll let it finish. I reloaded the model from the downloaded file and it's still a 40hr print for me.
RickS
2024-12-08 01:03:01 +0000 UTCMine took 29hrs at 100%. What size are you printing at?
Andrea DeJong
2024-12-07 23:47:46 +0000 UTCI just hit print, Thanks !
Dennis LeFort
2024-12-07 21:43:56 +0000 UTCJust starting mine now. Sucks when you have to work and have a couple projects due already! But, my new Bambu Cool Super Tack plate just came in, so I am printing it on the new plate. Default plate temp is 45 degrees. With four color on my P1S, it will take 45hrs!
RickS
2024-12-07 21:09:58 +0000 UTCAll models are testing between 60-100% It'll work!
Tracy Francis
2024-12-07 20:34:27 +0000 UTCAmazing print, a friend did it on his A1 and looks incredible, waiting for Boxing Day to get a mutli color printer.
Maleb
2024-12-07 19:25:19 +0000 UTCAnyone try scaling to 70% and print on mini ?
Dennis LeFort
2024-12-07 17:42:18 +0000 UTCThank you for the info.
Justine Taylor
2024-12-06 16:06:01 +0000 UTCI did one at 100% and it is the same as yours
Ellyn Stephens
2024-12-06 10:23:41 +0000 UTCThat fixed it. Thank you!
Krystyle Elytsyrk
2024-12-06 02:06:14 +0000 UTCFinished the gingerbread dragon last night! Wish I could share a pic. Came out great! 30hrs on the P1P for me with no resizing.
NVSHN3D DESIGNS
2024-12-05 17:06:51 +0000 UTCUgh, so cute!!! This is going on my build plate today!
Jayleen Epps
2024-12-05 14:48:11 +0000 UTCI handpaint my dragons as I do not have an ams system printer. But I love gingerbread designs so it will be worth the time spend
Barbara Stuij
2024-12-05 07:08:10 +0000 UTCare you going to make a baby version of this dragon.
Anthony Burhite
2024-12-05 06:31:57 +0000 UTCI made this one over night. Just came off the build plate. I love him. But I am curious. The cookie at the end of the tail should it swing up and down. I scaled my dragon down to 80% I think. And the tail goes up but not down. I feel if it gets forced down it’s going to snap. I don’t love making prints that will break in kids hands is this because it’s scaled down or does the hole in the cookie need to be a bit bigger? Thank you for any help or answers?
Justine Taylor
2024-12-05 06:08:25 +0000 UTCAre you planning on making a baby version of this dragon? I think it would be so adorable.❤️
Vanessa
2024-12-05 04:50:54 +0000 UTCTry adding 4 filaments in the prepare screen then bringing the file in :)
Tracy Francis
2024-12-05 02:37:05 +0000 UTCIt's already painted for you :)
Tracy Francis
2024-12-05 02:36:37 +0000 UTCFor the most part the answer is yes but they generally do not get tested in resin anymore
Tracy Francis
2024-12-05 02:36:19 +0000 UTCOn the printer now. It will be done tomorrow,
Ray
2024-12-04 19:18:16 +0000 UTCTHIS and the pumpkin spice filament I have will be such hit!
Jason R Ely
2024-12-04 16:28:11 +0000 UTCI would like to eat this one.
Darelle
2024-12-04 15:02:26 +0000 UTCI have been waiting for a gingerbread dragon from you! I am soooo excited to print and paint this, words cannot describe!!
Gigantuan Design
2024-12-04 14:35:58 +0000 UTCCan I use a resin printer for all of these prints including ones in the past ?
Michael Shanley
2024-12-04 13:34:50 +0000 UTCit is going to be one hell of a paint job but totally worth the time
Barbara Stuij
2024-12-04 13:33:28 +0000 UTCI started this on my printer last night. I can't wait to see it finished. This is one of my faves!
Amanda Brown
2024-12-04 13:26:02 +0000 UTCThis looks AMAZING as usual. Keep up the good work.
Brooks Whitford
2024-12-04 13:10:42 +0000 UTCShe does it AGAIN!! 💥💥💥
Billababe515
2024-12-04 08:52:49 +0000 UTCI cant wait thank you
sNp
2024-12-04 06:59:03 +0000 UTCI KNEW IT! YAY!!!!
Printcess Pixel
2024-12-04 05:14:15 +0000 UTCHow long did it take to print this?
Chris
2024-12-04 05:11:15 +0000 UTCSometimes it's the little things that matter and set you apart from others. :)
Shawn
2024-12-04 04:26:57 +0000 UTCAwe thank u! :)
Tracy Francis
2024-12-04 04:05:50 +0000 UTCThank you!! Starting a print right now! Love it!
Bernadette Kruk
2024-12-04 03:51:26 +0000 UTCLove this! Can’t wait to get this one going!
Erik White
2024-12-04 03:49:47 +0000 UTCAnyone else having trouble trying to open in Bambu studio? it keeps saying to update to the newest version and will only let me open it in single color form
Krystyle Elytsyrk
2024-12-04 03:45:14 +0000 UTCYour photos of your product are always on point! Killer camera work and photo backdrops!
Shawn
2024-12-04 03:14:46 +0000 UTCgreat work they look amazing 🎅🏼🌲
Zarah Norford
2024-12-04 03:14:14 +0000 UTCI am super aware! it's something I get reminded of every time I post something during the holidays haha That's why this came out first. I promise I do try but sometimes it just doesn't work out.
Tracy Francis
2024-12-04 03:04:43 +0000 UTCNo I completely understand that you’re busy I just wanted to share the feedback. Again I love your stuff and want to sell it but for holidays we have to have stuff done sooner. I don’t understand your timetable so wanted to help you understand ours so that we can sell your amazing products. I hope I didn’t come across mean. I probably did and I truly am sorry. ❤️
BlueByLiquid
2024-12-04 02:51:03 +0000 UTCI made it as soon as I was able to and made a point to release it ASAP. I'm sorry if that wasn't soon enough for you :)
Tracy Francis
2024-12-04 02:48:34 +0000 UTCOh this is beautiful! Its on the printer right now!
Ordinary Cube
2024-12-04 02:43:51 +0000 UTCThese are so adorable but these needed to come out last month or the month before. We have to print, photo and get out stock and sales on Christmas stuff is already falling off. Again Love the prints and they will be great for next year but its hard to make this stuff work when it comes out this late.
BlueByLiquid
2024-12-04 02:14:40 +0000 UTCMight be my favorite yet! On the printer :)
Andrea DeJong
2024-12-04 01:43:02 +0000 UTCThis is so cute! I just ordered the filaments so I can make this. I love it!
Angelina Maria
2024-12-04 01:40:08 +0000 UTCOmg yes!!
Yoriko Rayne
2024-12-04 01:35:29 +0000 UTCThis is so amazing! Now I need to figure out if I have a gingerbread color filament!
Dragoness19
2024-12-04 01:34:27 +0000 UTCI absolutely love this!!!
Julia
2024-12-04 01:25:28 +0000 UTCThis looks so amazing! Thank you!
Vanessa
2024-12-04 01:20:19 +0000 UTCvery excited to get this on the printer tonight!
Blake Ostler
2024-12-04 01:16:27 +0000 UTCOmg I can't wait to print this
Janna Neeley
2024-12-04 01:10:24 +0000 UTCLove this just downloaded and already starting on my machine. Love getting a dragon while out in what feels like 24 degrees while son sings at tree lighting
Jennifer Bigley-Hobbie
2024-12-04 01:09:23 +0000 UTCAll good now - apparently I was just overdue for a reboot!
Cameron Muise
2024-12-04 01:08:55 +0000 UTCLove this!!!
AB3D Printing
2024-12-04 01:06:30 +0000 UTCIt's the same as any other 3mf I put out! Make sure your slicer is up to date! I cannot guarantee it will work on Anycubic Slicer however
Tracy Francis
2024-12-04 00:58:30 +0000 UTCAMAZING!
PolySauce
2024-12-04 00:56:53 +0000 UTCI freaking love this!
Jaime Havenar
2024-12-04 00:55:26 +0000 UTCThis is sooooo cute! I love it. I can't wait to get home and print it!
Christina
2024-12-04 00:51:32 +0000 UTCIs anybody else having issue with the COLOUR file? Mine appears as as one colour. (I checked both files)
Cameron Muise
2024-12-04 00:50:45 +0000 UTCI would eat that if it was real.
Christy Dyer
2024-12-04 00:49:54 +0000 UTCThrowing it on my printer instantly, this is adorable!!
Kristen Vacey
2024-12-04 00:48:09 +0000 UTCOh wow. This is cool!!
Melissa Clason
2024-12-04 00:47:19 +0000 UTCThats so cute!!!
JMac Creations
2024-12-04 00:46:04 +0000 UTClooks good enough to eat
anthony floyd
2024-12-04 00:45:50 +0000 UTCBeautiful work Tracy!!!
Mark Gierhart
2024-12-04 00:43:59 +0000 UTCYES YES YES
Carusima Hikura
2024-12-04 00:43:19 +0000 UTCNot me screaming and scaring all of my family!!!!! YESSSSSSS!!!!!!!!!
Kristin Coker
2024-12-04 00:42:42 +0000 UTCOmgggg it's AMAZING
Abigail Petri
2024-12-04 00:42:41 +0000 UTCSo fun!
Elizabeth Hoskins
2024-12-04 00:42:38 +0000 UTCBut why is this so stunning 😍😍😍😍. My favorite
Ruth & Mike
2024-12-04 00:42:32 +0000 UTCSo stinkin cute!!! I need to print this asap!
Kendra Kent
2024-12-04 00:41:55 +0000 UTCHow did you read my mind?!?!?! I was just thinking today you should make this dragon and here it is!! Wow!! Thank you for your amazing work!
Morgan Kotnik
2024-12-04 00:41:41 +0000 UTCI love that you put it on a cookie sheet. I never would have thought of that. Absolutely gorgeous.
Samantha Powers
2024-12-04 00:41:40 +0000 UTCThis is AMAZING!! 🤩
Chellout25
2024-12-04 00:35:51 +0000 UTC
