Crab & Crystal Crab
Added 2024-08-25 23:48:46 +0000 UTCThis was an August Design and has been Archived! If you were subscribed in AUGUST, you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in SEPTEMBER 2024, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the SEPTEMBER Models will be in the SEPTEMBER 2024 posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! You can get the most up to date discount code on the Welcome and Info post!
https://www.myminifactory.com/users/Cinderwing3D?show=store
-----------------------------------------------------
Hi Cinders!
THE MONTH'S NOT OVER YET! I have 3 more releases all coming out TODAY! Thank you all for being patient while my family moved this month!
2/3: CRAB & CRYSTAL CRAB
Adding to the Tiny Collection is the Crab! These are easy to print and fun to play with! I hope you all enjoy them!
.3MF Files Included for both versions!
Make sure you check out the other TWO releases coming out today!
Thank you all for your support!
- Tracy
----------------------------------------------------
FILAMENT:
https://www.amazon.com/shop/cinderwing3d
Crab: Amolen Azure Blue
Crystal Crab Orange: Ziro Passionate, Ziro Autumn
Crystal Crab Pink: Locyfens Red Silver, Twinkling Blue (not available but similar one is Cookiecad Translucent Blue Glitter)
-----------------------------------------------------
All my designs are print-in-place and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
------------------------------------------------------
AUGUST 2024 Models: HERE
Hollow Turtle - RELEASED
Tiny Bat - RELEASED
BABY Dune Striker - RELEASED - EXCLUSIVE
Infested Dragon - RELEASED
Winged with regular tail
Winged with spinner tail
Wingless with regular tail
Wingless with spinner tail
Keychain spinner tail
Crabs - RELEASED
Crab
Crystal Crab
Tiny Spider 3 Pack -RELEASED
Mushroom Spider
Donut Spider
Water Lily Spider
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
Please message in, I cannot provide help over comments
Tracy Francis
2024-12-14 00:00:14 +0000 UTCI never got the mmf email sent for August. I've been searching my email and just can't find it :( I really need the crabs please 🥺
Jess Anderson
2024-12-13 23:51:56 +0000 UTCdo i have to pay even thou exclusive member.
brenda
2024-10-24 13:35:49 +0000 UTCeven exclusive members have to pay extra to download
brenda
2024-10-24 11:15:33 +0000 UTCAs stated in the post, it's been archived, You'll need to purchase it!
Tracy Francis
2024-10-24 00:53:36 +0000 UTCI have just become a member and would like to know how I get this file?
brenda
2024-10-23 16:06:12 +0000 UTCcant find the link for this one?
Casey Phillips
2024-10-11 09:51:31 +0000 UTCPlease message in if you need help with MMF!
Tracy Francis
2024-09-22 03:40:56 +0000 UTCI did not get an email from my mini factory, I am only subbed here on patreon. Will I still have access to this file?
Donald Howard
2024-09-22 03:19:39 +0000 UTCI have been a subscriber for a long time but I didn't download this in time before it was archived. I can't find the email from MMF . Is there anything else I can do? Is there a way to check which email it was supposed to have gone to?
Emily Rodriguez
2024-09-21 14:51:34 +0000 UTCAs the post states, if you were subscribed you should have gotten an email from MMF to redeem it for free over there as the file is now archived :)
Tracy Francis
2024-09-07 04:40:21 +0000 UTCCan someone please help me? Should I go buy the crab models or were those part of the Patreon sub?
Lydia Pennington
2024-09-07 03:42:54 +0000 UTCOMG THIS IS ADORABLE!
Yoriko Rayne
2024-08-29 23:56:23 +0000 UTCTry recalculating purge volumes, I usually do .6 or .5 pending on color combo but I also purge into an item and get no bleeding. Throw a crab on the plate as a purge item and it reduces waste and helps avoid bleeding on color change.
Stargazr69
2024-08-29 12:28:47 +0000 UTCYou can also increase your purge block. (Prime Volume)
Katt Shop LLC
2024-08-29 07:28:03 +0000 UTCTried 3 walls, then 5 walls, still getting it
Ollie3D
2024-08-29 01:51:28 +0000 UTCI ignored the warnings and printed it without supports, this last time, and it's PERFECT! NO problems printing at all.
Silvyr
2024-08-28 03:12:12 +0000 UTCAnyone else getting black lines going all around the print when it gets to the eyes? I made sure the flushing wasn't 0 like the squid, trying a 2nd time with 3 walls. What other settings could be the culprit?
Ollie3D
2024-08-28 02:04:47 +0000 UTCI’m thinking snap on crystals this way you can print them in clear filament and just plug and play
Herb Veitenhans
2024-08-28 01:39:28 +0000 UTCMy 13 year old printed some tiny top hats and glued them to some of her spiders. They looked adorable. All of her friends are asking her for spiders now. That would be so fun to have little snap on accessories.
Erin M
2024-08-28 01:23:02 +0000 UTCI haven't tried the crab yet, but that warning comes up on most of the Cinderwing files on my Bambu and I just ignore it. Every file has printed perfectly for me with no supports. I'm definitely going to give this crab a try next.
Erin M
2024-08-28 01:20:55 +0000 UTCI LOVE LOVE LOVE this crab! I've printed 2 already- however, in the Bambu slicer, it says I have to enable supports. They are such a pain to remove- has anyone just overridden that warning?
Silvyr
2024-08-27 17:02:08 +0000 UTCI tried at 50% for the crab and it turned out perfect.
Lisa Lloyd
2024-08-27 15:41:01 +0000 UTCI just did them at 45% with no issues and joints are still strong
Marti Reusch
2024-08-27 11:00:10 +0000 UTCSame as anything else! 60-100%!
Tracy Francis
2024-08-27 05:05:36 +0000 UTChow small can these go?
Tami Gardner
2024-08-27 04:20:27 +0000 UTCAre these "tiny" crabs supposed to be a similar size to the Tiny Spiders? When I loaded the 3MF of the Crystal one, he's pretty huge, like 2 on a Bambu plate size...
Mike Sprague
2024-08-26 15:24:06 +0000 UTCSecond this!
LeeAnne Hardin
2024-08-26 14:07:01 +0000 UTCThese are adorable!! I hope we get a hermit crab. That would be amazinggggg!
LeeAnne Hardin
2024-08-26 14:06:47 +0000 UTComg sooo cute cant wait to do these
Clinton Fullerton
2024-08-26 06:18:03 +0000 UTCSame as anything of mine! 60-100% is tested!
Tracy Francis
2024-08-26 02:40:35 +0000 UTCHow small can these go?
Andrea DeJong
2024-08-26 02:21:12 +0000 UTCOMG.... Time to start printing an army of crabs to go with my growing army of bats. Can't wait for the sakura variant(s). I /need/ bat variants. XD. ;)
Dead-Eye Dice
2024-08-26 02:14:23 +0000 UTCMy print que just Shot up!! but I love it!! Mushroom Jumping spider!??! I want that as a monster in DnD!
James Besaw
2024-08-26 00:52:03 +0000 UTCShut UP omggggggg
Marti Reusch
2024-08-26 00:23:14 +0000 UTCIt would be nice if some of the crystals on the crab could be added like hats so we could print them separately and just snap them into place
Herb Veitenhans
2024-08-26 00:15:47 +0000 UTCGot 1 0f each printing and will be added to my 3d printed aquarium family.
Ryan Schmidt
2024-08-26 00:02:23 +0000 UTCSo cute!!
JMac Creations
2024-08-25 23:55:33 +0000 UTC
