BABY Axolotl, Subscriber Exclusive!
Added 2024-07-24 01:03:07 +0000 UTCHi Cinders!
BABY DRAGON RELEASE! Bringing you all the highly asked for BABY AXOLOTL DRAGONS! - These are a favorite of mine!
With winged and wingless versions! Like the adult, these are entirely print in place with rotating and foldable wings - only baby sized!
THANK YOU to Cinderwing Tester, TOAD, for the generous paint job files! I hope you all enjoy these for any MMU prints! It looks amazing!
Additional 3mfs added painted by SledgePainter!
Thank you!
- Tracy
-------------------------------------------------------
FILAMENT: The body is iBOSS Candy Rainbow LINK and the accents are Fillamentum Amethyst Purple LINK
FAE WOLF DRAGON UPDATE: We are aware some of you are having issues with the outer wing part printing correctly. We are testing a new rendition with extra supports in that area. We will have the revision out to you as soon as we finish testing! :)
----------------------------------------------------
All my designs are print-in-place and require no supports. All you need is a clean bed and you're off!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
Filament: https://www.amazon.com/shop/cinderwing3d
------------------------------------------------------
JULY 2024 Models: HERE
Tiny Squid - RELEASED
Tiny Starfish - RELEASED
Fae Wolf Dragon - RELEASED
Baby Axolotl Dragons - EXCLUSIVE - RELEASED
Secret Design
-------------------------------------------------------
PLEASE READ
Please remember, NO sharing, re-selling, or distributing this digital file or modifications of it in any way. Also, you are not authorized to use Cinderwing3D photos or anyone else's photos without their permission.
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
All Supporter Exclusives: https://www.patreon.com/cinderwing3d/collections
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
vv
The Vertex
2025-01-19 20:18:55 +0000 UTCI would love this one in a tadling!
Garret Edelenbos
2024-12-28 15:23:30 +0000 UTCOk that makes sense thank you!!
Jordin Hitt
2024-12-17 10:09:13 +0000 UTCIt's probably due to a lack of processing power
Tracy Francis
2024-12-17 02:03:22 +0000 UTCfor some reason when I put this into my Bambu studio it is pretty much un able to be edited at all due to lag. I don't know what the problem is and all your other files load just fine. Idk if my Chromebook just doesn't like that file or what?
Jordin Hitt
2024-12-16 22:42:12 +0000 UTCIs the file updated? I saw there were problems with the wing. I just want to be sure before I print
Angela
2024-09-21 20:15:38 +0000 UTCAny of my eggs would work for this!
Tracy Francis
2024-08-30 18:35:23 +0000 UTCIs there an egg for this?
Michelle Sanford
2024-08-30 13:38:07 +0000 UTCI am loving this. Going to is this tonight at my night market. I made 1 at 100% and 2 at 60%. I want to make an egg for the 60%.
Jamie Sanchez
2024-07-31 19:38:06 +0000 UTCAbsolutely beautiful! One of my favorites so far.
Don Fief (aka SwagDad)
2024-07-31 04:37:49 +0000 UTCI printed one of these for my market Sunday and it was snatched up very quickly! Thank you for creating this for us vendors.
Monique Peters
2024-07-29 21:07:48 +0000 UTCI always test models 60-100%!
Tracy Francis
2024-07-28 23:06:34 +0000 UTChave these been tested down to a certain percentage yet? I do a lot of minis and these would be awesome!
Kent Dunn
2024-07-26 17:08:19 +0000 UTCThe print with the wings with holes. First one did great and then two fails at the top of the wings.
Sewfor54
2024-07-26 02:07:47 +0000 UTCWhich set of wings? I printed the one with holes in the wings and it came out perfectly.
Rachel
2024-07-26 01:48:22 +0000 UTCAbsolutely adorable I'm definitely making 2 for my nieces thanks ^_^
Andrewcooke Cooke
2024-07-25 20:30:19 +0000 UTCI must be doing something wrong because I can't get it to load in Cura
Gina C
2024-07-24 22:31:22 +0000 UTCIf you are having issues with adhesion please clean your bed and use a brim :)
Tracy Francis
2024-07-24 18:26:23 +0000 UTCI LOVE your babies series!
Nita Schoonover
2024-07-24 17:19:56 +0000 UTCBritt Kuperus
2024-07-24 16:31:09 +0000 UTCWhat scale are they in the Picture please.
Zara Fereday
2024-07-24 15:39:39 +0000 UTCShut up this is the cutest thing my kids will be in love with this one
Ashley Fenstermaker
2024-07-24 04:01:37 +0000 UTCAbsolutely adorable!
Silvyr
2024-07-24 03:03:49 +0000 UTCI know what will be going on my Printer TONIGHT!
SilverWitch
2024-07-24 02:47:47 +0000 UTCThanks for working on the Fae Wolf dragon! Can't wait for an update. I too, have had fails on the wings.
Sewfor54
2024-07-24 02:42:05 +0000 UTCI just started print for this as my son was so excited to see this come out tonight.
Toshua
2024-07-24 02:23:10 +0000 UTCYou made my day!!
JMac Creations
2024-07-24 02:09:02 +0000 UTCI think my daughter just died seeing these! LoL they are adorable!!!
The Disappointed Dad
2024-07-24 01:24:22 +0000 UTCThanks for the update on the Fae Wolf, I thought I just had the wrong temperature for my filament.
Kristina McNicol
2024-07-24 01:13:06 +0000 UTCAmazing design, my family loves axolotls so will be printing many of these
charles littler
2024-07-24 01:11:40 +0000 UTCLooking awesome!
Brandon Ryan
2024-07-24 01:11:37 +0000 UTCAwesome!
Over the Brook Gaming
2024-07-24 01:10:06 +0000 UTCI was like hmmm I can’t wait to see the next dragon! It’s cute
James
2024-07-24 01:10:04 +0000 UTCfixed!
Tracy Francis
2024-07-24 01:09:54 +0000 UTCsuper cute
Jamie Sanchez
2024-07-24 01:09:32 +0000 UTCFYI. The second link goes to discord, not the filament
Kilonova
2024-07-24 01:08:17 +0000 UTCCute!
Ika-Ita
2024-07-24 01:04:43 +0000 UTC
