The Wraithwing Dragon

Not sure if will be able to see my comment, I am wondering if it's possible to do mod on this design. I have a client asking me to see if can length the tail of the WraithWing Dragon by add extra 5-7 inch?

Xman3d

Then you should have it in your MMF archive, if you don't file a Ticket on Discord or shoot us an email at contactcinderwing3d@gmail.com

Jazzy

Ive been a member for almost a year. The file was only available for a few weeks on here. I

Efren Gil

As the post says, it has been ARCHIVED. If you were not subscribed in Septemeber youl will need to purchase it!

Jazzy

As the post says, it has been ARCHIVED. If you were not subscribed in Septemeber youl will need to purchase it!

Jazzy

As the post says, it has been ARCHIVED. If you were not subscribed in Septemeber youl will need to purchase it!

Jazzy

As the post says, it has been ARCHIVED. If you were not subscribed in Septemeber youl will need to purchase it! Please head to your MMF archive to get any updates!

Jazzy

Where are the files? A few posts are missing the files.

Efren Gil

Not seeing the files?

Same

I'm also not seeing any files attached to this post

Tabby Rhodes

öffne deinen Einladungslink für MMF darin ist dann die Datei

Moroboshi

I'm not seeing the files. I want to make sure I downloaded the newest ones.

Angela Farnsworth

I am honestly not sure on this one. We havent had other reported issues of it... Maybe try again? I'm sorry thats weird as heck

Jazzy

So when I download the new files the just the wings show up as file not found. Tried redownloading and it was the same. The body only file loaded. yes i turned it on and off, lol.

Rebecca Marinan

Haha im downloading models and my daughter is asking why her overwatch hasnt downloaded yet...im like CHILD IM DOWNLOADING DRAGONS ITS MORE IMPORTANT haha

Jess Mathews

First dragon printed great had to reduce the wings to 97% to fit 2nd dragons wings ball joint snapped off when trying to attack and then the fro t legs both snapped trying to move them. Will wait for the fix before trying again as do t want to keep wasting filament of stuff that cant sell Apart from that great looking model

MadMonty

I too broke both legs of my model and was being careful as I knew they had the potential to do so. On my second model, I heated that joint with a lighter to soften and they popped right in. Maybe this can help if you don't want to wait for the update. ;)

Lioness2000

Beautiful model, but so sad. I printed 4 of these and they all broke while trying to carefully open the front legs. Lots of waisted time and filament. Why is the fix taking so long?

Wadecbr

I follwed the instructions but the front legs joints still broke grrr. Went to extend the legs to stand and the leg broke right off.

Scott Mckee Jr

I printed this first time no issues so far. Used some Elegoo Black PLA and worked great. I followed the suggestions and held the legs as I put them in the right position.

Eric J(3DLife)

Same here I was also nervous to try to extend the winds fully

Skye Blackledge

I just printed my first one last night and both front legs immediately snapped off! Came to see if the updated file was here yet too.

Hayley Matthews

Has there been an update for the dragon and its legs yet? I printed one and broke the leg , so waiting to print another for my show this weekend. Thank you!

Sewfor54

In Cura I have my flow (extrusion) set to 110. I have my height set to 0.16, infill 20% with 4 wall lines.

Auryn

I just finished this dragon on my first go. She's absolutely beautiful!! I'm seriously so excited to see upcoming dragons with this brand new model! I had success with my Ender 3 Max Neo at 110%, with a few modifications. I used the same eSun Bone White filament. The only issue I had was the rear spike on one of hind feet, but that's my own fault.

Auryn

No

Jazzy

Wow! This is incredible! Truly... Thank you for such an incredible piece of art!

Lioness2000

any ETA on the fixed version?

Mike Sprague

I was going to print this a few days ago, then saw the update. I'll wait for the fix since I want to print one of the ones that fills the plate! :D

Maria Chacon

still Waithing for the fix, thanks

Ah! I was just coming to say the legs need some more support and snap really easily when locking down. Can't wait for the update!

buildabrian

I would def say to check your flow then, the ball sockets for this model are pretty tight so its odd they would be loose.

Jazzy

most PLA's top flow rate is 35mm's if the spool doesn't give you its perimeters default to 30 and no more then 40mm's print speed.

Michael R Nicolai

I have found some brands are better then others when it comes to silk but ill red both PLA and PETG and see how it goes. I know that filament she used from flashforge is a good solid filament.

Michael R Nicolai

nebudu tu opakovat to samé dokola co tu všichni píšou. budu doufat v opravu aby tak krásný dizajn nepřišel k ničemu. krásný drak ale bohužel nepoužitelný kvůli těm předním nohám

I printed the dragon at 125% with no issues. it took me a moment to realize I had to snap the front legs in place. I thought I would break them at first, but they are fine. The skeletal wings snapped in just fine as well. They did seem like they could break but did not. I used the same PLA mentioned above in the description (I just so happened to have some). I'll be on the lookout for the updated file.

BMS Imaginarium

I apparently printed my dragon at 65% and not sure what happened on the first pair of wings but made sure the new set printed at 65% also and it worked and fit perfectly lol. I had a moment of what the what's.

Monie

I got it done and standing perfectly. 1st one I broke a leg but the 2nd one is perfect

Scott Mumma

Thanks for trying to fix. I've done 2 and broke the legs on both. Reducing the flow rate on the second attempt and sanded a little, which helped, but still broke one leg. Waiting for the update before attempting again.

Derek Jensen

I have done two prints on the bambu and legs have broken each time even using two hands as suggested and it was only slight pressure and they broke real easy. Glad to see an update coming soon. Also the flat wings the ball joints are quite loose on two prints I made. Usually on the ball joints with other dragons they are really tight for me to pop them in.

Lisa Crane

Love this dragon so so much was awesome to print.

Jeneanne Mccaskey

Great model! I used a lighter for a second on the upper arm portion of the elbow to make it a little more malleable for the first movement.

Looks like I need to check my flow. Both legs broke even with supporting them

David Henry

Thanks. I’ve printed three and broken legs on so far oops

Heather Dryer

yep broke both my knees trying to lock it, ball sockets on the wings also snapped putting them in even at 99%. Maybe it was the silk pla going to try another filament tomorrow

Tim Belton

Let us know how you went 👍

Zombie Saint

I'm getting a lot of really bad saggs on the links in the tail at 100 percent. Any suggestions on tightening them up?

Justin Chavez

just printed on my elegoo neptune 4 pro. no issues at all with the dragon or the snapping in place however when i went to print the holey wings at the same size of 75% my ball joints were not big enough to even snap in lol so I will up it by 2% for the wings and try again :D

Monie

Just Printed @ 5% infill 3 walls 100% on my K1 no problems at all what an absolutely next level model Tracy!

Absolutely love this dragon! Printed on my P1S, 10% infill, 2 walls at 100% with Burnt Titanium (I used generic PLA). I have no problems with her and I'm throwing on another one in silk copper - thank you for such an incredible file!!

I love the look of the design. Printed it twice. P1s and P1p. 20% infill, 3 walls at 70%. The front legs snap like dry twigs to very slight pressure. Love the idea behind it and excited to see next iterations.

Crescent Creations 3D

I have not used this model yet. However, with other models where you have to pop pieces in place, heat has helped me. I use a heat gun, but maybe a blow dryer or something like could help others. be very careful and do not heat up for long or it will melt.

Make Sure you snap the neck into place. :) It's stationary at the base. :)

Garb-n-Gizmo

As stated in the post that first crack can be tough, you need to support it with your fingers when you go to do it

Jazzy

Thanks Jazzy - Apparently I am taking lessons from my son when it comes to reading ;)

Kyle Self

So with playing with it, I see how the neck clicks in, but having an issue with the hind quarter. It looks like its supposed to hook in or snap in somehow but I apparently am blind to it.

Lexthore Drakein

its impossible, both of mine broke as well is one of the models not so-posed to move?

candace flanagin

Thanks Jazzy! I did read that comment in the post before attempting to move the dragon. I'm thinking it has more to do with the red/black silk filament that I used, rather than the model itself. I have a few more of these printing right now in different filaments and slightly higher infill - will report back if those areas still experience issues afterwards. I appreciate the swift response as always :)

Brian York

I cannot stress enough with this one that being gentle on the first cracks on the legs is key. New bodies are tough and the design will be improved overtime. We also highly recommend you check your flow to make sure it doesn't come out too tight! Y'all got this!

Jazzy

They kinda can, yeah! Not great tho, the balls are different

Jazzy

Now that's weird. We didn't experience any balancing issues. Hmm

Jazzy

As stated in the post that first crack can be tough, you need to support it with your fingers when you go to do it

Jazzy

As stated in the post that first crack can be tough, you need to support it with your fingers when you go to do it

Jazzy

When I printed it on my P1P the legs broke at the joint when I tried to bend them. First time that has happened with any designs. Not sure if I need to tweak my settings, but that was at 100 percent so it isn't a reduction issue.

Kyle Self

I ABSOLUTELY love this dragon!! I printed this on my P1S with 3 walls and 10% gyroid infill and have similar issues with the front legs snapping off when trying to move them, as well as not being able to stand up. Not a big deal, but wanted to chime in on these as well. Seriously, this is one of my favorite models you've released! THANK YOU!!

Brian York

I can confirm the same issue as Carrie. Printed on 2 x1cs the full plate with flat wings. the body will not stand at all, even with adjustment of the wings into multiple poses to try and shift the weight.

Lexthore Drakein

Printed the full plate and this won't sit up at all. It's top heavy and just flops over.

carrie roehrig

Printed at 60% straight up snapped off both front legs with little effort but since the elbow spike is there can move the leg in place can't wait for the wings to be done

chaz200

Das ist mal ein Tolles Design - endlich mal was anderes... bitte weiter so

Moroboshi

This design is Fantastic! Would love to see more like this.

Jamie Wilson

Absoulutely in love with these

Wickedmonkey84

Remake the crystal dragons in this style!!!

TomPrint3D

Incredible!

Trent Shea

This is awesome. What settings did you use for the Burnt Titanium? (Speed and temp)

Do both of these wings also work with the hollow dragon?

Keaton Hammack

Love it!

That phoenix on my printer couldn't finish soon enough! LOL

Bre Senten

OMG!!!! LOVE IT!

Vasyl Gontar

Wholy Smokes! This is awesome looking! Noice!

Erik White

Wow Love it!! It's on my Bambu right now!!

!!!! Printing now! 0.6 nozzle Rainbow Glitter :) 7 Hours to go!

John

hyped for this one. 2hrs left then this going on, just need to pick a colour???????

Simon Neal

I mean... I can't even.... Wow

Sneezy Fey

Let's gooooooooo

Mikie Matteson

this is going on in a little over an hour in a green, black, and gold tricolor. As soon as my current print is done, its on baby!!! Want to have one of these for this weekend for sure.

Ryan Weisal

I love using the burnt titanium. Have gone through a lot of it but have enough left for this. Yay

Scott Mumma

Just in time for my first bambu must be fate

chaz200

This is absolutely sick. 🐲

Woah!!!

Mike Chamberlain

Oooo this is awesome

Jess Mathews

jabberwocky!!!

Clinton

Looks awesome!

Lucas Tucker

Sick, once I'm done printing the pheonix I'll start it up.

WOW that looks great, cant wait to print it

Joshua Bryan

Wow, that looks amazing! Great work! Can't wait to print it!

amazing model

Keats Woodoworking