Archived: Orchid Dragon Release!
Added 2023-01-25 21:41:53 +0000 UTCThis was a January Design and has been Archived! If you were subscribed in January you will receive an email from MyMiniFactory to access the archived files from that month. If you are starting your Subscription in February, Welcome! Your exclusive models are available immediately in the Exclusive posts and the February models will be in the February posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
This model is available on Cults3D and MMF for purchase! https://cults3d.com/en/users/Cinderwing3D/creations
-------------------------------------------
Hi Cinders!!
Here is the first of the 2 Dragons for this month, The Orchid Dragon! This one is a January Model and the next one will be the exclusive!
There are 2 renditions for this model - Plus a Tail Keychain! I couldn't decide so I made both, then my test team liked both, so now you all get both! LOL! There will also be a Baby Orchid Dragon Releasing next month in February!
Filament:
Pink Dragon Filament (with silk white stripe)
Orchids are one of my favorite flowers and I'm excited to get them out for Spring!! Hope you all love these!
---------------------------------------
January Models:
- Hippocampus
- Valentine Hearts Bonus
- Tiny Phoenix
- Orchid Dragon
- EXCLUSIVE Dragon (Testing)
PLUS All exclusives in the Exclusives Tab under "POSTS" or in the link below!
---------------------------------------------------------------
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
Discord is our MAIN form of communication and way to provide help! Please join our community below:
- Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email:
- Email (support@cinderwing3D.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admins and Test Team for all your hard work!
- Tracy
Comments
I am having the hardest time printing this one with ZIRO PLA. It keeps coming loose from the build plate even though it is squeaky clean and I use glue. I noticed when I try to add a brim, no brim is added. Please help?
Nicole Martin
2024-01-14 20:07:35 +0000 UTCyou can still buy it! https://www.myminifactory.com/object/3d-print-orchid-dragon-271104
Jazzy Plz
2023-08-06 18:43:32 +0000 UTChttps://www.myminifactory.com/object/3d-print-orchid-dragon-271104
Jazzy Plz
2023-08-06 18:43:24 +0000 UTCso gutted I missed this one
HummingBird Designs
2023-02-16 00:16:12 +0000 UTCWhere is the STL?
Jacob Snow
2023-02-14 00:27:50 +0000 UTCquestion: i am currently printing this vs2 but i see alot of supports that when its done might be hard to get off. is vs1 without supports ok to print or do i need the supports on this?
Terri
2023-02-07 20:05:20 +0000 UTCWill there be an Orchid Turtle???
Mike Sprague
2023-02-01 21:24:01 +0000 UTCThey are usually all tested done to around 60% scale
DragonsAura
2023-02-01 07:08:05 +0000 UTCSo, my printers usually shudder if I mention Cinderwing. Thank you for this departure from the extruder torture. ;)
Hero Electronics
2023-01-28 12:36:04 +0000 UTCdo the dragons scale down or what is the minimum percentage you can go down?
Danielle Calabro
2023-01-28 02:31:54 +0000 UTCdo people leave the tail keyrings at 100% or shrink them down?
Nikki Line
2023-01-27 02:23:28 +0000 UTCI love it, printing my second one already!
Laura @ Prism3D Creations
2023-01-26 23:50:44 +0000 UTCabsolutely love it!
candace flanagin
2023-01-26 10:17:03 +0000 UTCLove it, going on both printers. I hope the baby comes early in the month so we have it for Valentines day sales.
Data Diva
2023-01-26 02:34:51 +0000 UTCStraight to the print room!
Hero Electronics
2023-01-26 02:26:58 +0000 UTCHad a printer before work all set for this model to drop. sending to the printer now while on lunch to get started lol
Kevin Stubbs
2023-01-26 00:53:59 +0000 UTCgive it a minute or two. It's a big file.
Brandon Hall
2023-01-26 00:42:19 +0000 UTCI can't get it to slice and have tried two different slicers. It will load but then it won't slice. Anything I can try to get it to work.
Jill Woolsey
2023-01-25 23:59:03 +0000 UTCprinting on my V400 13 hours going to love this dragon
Aaron Sellman
2023-01-25 23:56:53 +0000 UTCI got both to slice in cura just fine 1 day 2 hours!!!!! so excited
Sharon Caldwell
2023-01-25 22:20:37 +0000 UTCI'll have to give v2 a go, I like the softness of it.
Allen Smith
2023-01-25 22:16:53 +0000 UTCJust got to pick a filament. My printer just finished, so perfect timing
Kate Ettensohn
2023-01-25 22:11:06 +0000 UTCthey are big files and can take time to load, but if you're still having an issue let me know and I'll ask my team! :)
Tracy Francis
2023-01-25 22:08:32 +0000 UTCBeautiful dragon. I have only a little bit of rainbow left. Will have to see if I can get a print out of it
Clayton Stroebel
2023-01-25 22:03:19 +0000 UTCI like the design :) Well done, thank you!
Dan Kilmer
2023-01-25 22:02:46 +0000 UTCVery cute. Can't wait for a baby version of this one!
Katherine Lawrence
2023-01-25 21:58:01 +0000 UTCGoing to have both prints running each right now, was just looking to put them to work as you posted. =)
MicrosoftSam
2023-01-25 21:55:31 +0000 UTCattempted option one and cannot get the file to slice in cura. anyone else having this issue or is it a me thing?
Jamie Duarte
2023-01-25 21:53:31 +0000 UTCthink my mom and her sisters will like these.
derek mccord
2023-01-25 21:53:22 +0000 UTCLike getting 2 dragons in one!
Johnny Davila
2023-01-25 21:46:28 +0000 UTCYay! Thank you!
Tracy Francis
2023-01-25 21:45:22 +0000 UTCThat'll be going in my printer tomorrow! Love it!
Bre
2023-01-25 21:43:55 +0000 UTC
