EXCLUSIVE MODEL - Coral Reef Dragon
Added 2022-09-11 09:52:28 +0000 UTCFDM Settings
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
Resin Settings
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.
Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.
Comments
Clean your bed really well and use brims :)
Tracy Francis
2025-02-19 23:54:44 +0000 UTCdo you have any tips for getting the wings to not move during print
erika barrow
2025-02-19 23:09:33 +0000 UTCAs stated in my tier before you subscribe, on subscribing you have access to the Welcome Pack for free with sub, anything not in the welcome pack is purchasable. :) This model is in the welcome pack, so you get to download it. Please take a moment to read the welcome and info post for more information: https://www.patreon.com/posts/welcome-to-info-71819754
Tracy Francis
2025-02-04 19:08:37 +0000 UTCHow come some can be downloaded but others can’t?
erika barrow
2025-02-04 03:45:17 +0000 UTCAll my models are tested between 60-100% :)
Tracy Francis
2024-12-04 04:36:37 +0000 UTCHas anyone tested this one at like 60-75%?
John Goedeker
2024-12-04 04:35:55 +0000 UTCThis was so long ago it might not be around anymore honestly!
Tracy Francis
2024-09-25 23:47:30 +0000 UTCI tried to find the filament you said you used but it's not bringing up the right color pattern :(
Jessi Young
2024-09-25 13:01:46 +0000 UTCHey there, you can ignore those, they do not affect the print, thank you!
Tracy Francis
2024-08-09 18:37:09 +0000 UTCI fixed the model, i found 50 degenerated faces and a load of self-intersections and 8 duplicated faces. I love this model! so pretty
shade emry
2024-08-09 09:10:33 +0000 UTCCura has problems with certain files and I just don't know why. I have run into this problem with a lot of different larger files.
Si11yGohan
2024-01-10 09:02:36 +0000 UTCI cannot get this one to slice in Cura. It fails. I've downloaded it twice now. Ideas?
Jennifer Estlund
2023-12-29 02:50:38 +0000 UTCwhat filliment do you use
carson
2023-11-04 14:04:33 +0000 UTCNo supports are needed
Jazzy
2023-07-17 21:19:06 +0000 UTCDoes this need supports? My slicing thing is saying that some of the areas basically would go wrong. What should i do?
Emily Weeks
2023-04-10 15:25:30 +0000 UTCI'm SO excited for this one... my little dragon-loving marine biologist heart is SINGING
Katie Nickerson
2022-12-23 14:58:47 +0000 UTCAwesome models! How can I show you my prints. They are resin and they look like gummy candy. And they are blacklight active too.
Tony Scott Madson
2022-09-23 03:14:25 +0000 UTCI've struggled with this one. Change machine,infill all I could think of.But the tail fins weight n head ect did not handle.being removed from print plate.
paulene schmedeke
2022-09-21 17:54:15 +0000 UTCthank you!
Tracy Francis
2022-09-14 02:58:11 +0000 UTCsunlu silk rainbow :)
Tracy Francis
2022-09-14 02:58:03 +0000 UTCWhat filament did you use it is beautiful
Skyrocket Cards
2022-09-13 22:43:22 +0000 UTCAll these exclusive files are the same, except the Snake has been updated! These files are no longer available on our website but will remain on here with easy access links from the pinned post! All new Exclusives will remain on here as well! :)
Tracy Francis
2022-09-11 19:52:26 +0000 UTCAny of the exclusive models that were posted last night different in anyway than the files we already had access to on your site? I don't want to miss anything but I also don't want to download files I already have. Thanks!
Jocelyn Kessinger
2022-09-11 18:45:33 +0000 UTC
![MeineKraft [64x] Resource Pack - Fanmade](https://xaiju.com/istorage/3923.jpg)
