Dr Paradigm / Piranoid / Streetsharks
Added 2024-02-10 01:56:24 +0000 UTCDr Paradigm / Piranoid (Download Link at the end of the post)
13 cm High
The files are compressed in a Rar file, decompress it to obtain the STL files, WinRar is a free software you can download from google
Assembly : Filament & Resin. / Can be scaled up
If you are having troubles keeping the parts from falling from the bed use a raft.
Don't add extra supports to the files, there are not needed and it will cause troubles.
Important: Some small parts like the hands can be challenging, print it slow at 30 mm/s even 20, 200 is a good temp for the nozzle
Print the files at 40 mm/s (speed) faster than than will cause problems especially in Print in Place models, Nozzle temp between 205 and 215 and use your plastic Flow (Extrusion Multiplier in Simplify 3D) at 0,90 so the parts can fit correctly
Print your own articulated action figure in pla filament and resin
-Print in a glass bed using any hold hair spray (this is optional, but we've been printing this way for years, nothing give you better looking and flat first layers)
Have a nice weekend people!!
3D PRINTING SETTINGS
Plastic Flow / Extrusion Multiplier = 0,90
Primary Layer Height = 0,1600 (mm)
Top Solid Layers= 9
Outline/Perimeter Shells= 2 / 3
Temperature= 215Β°C / 205Β° (it's up to you)
Default Printing Speed= 40,0 mm/s
Outline Underspeed= 40%
Infill Percentage= 12% (or more, it's up to you)
-Valentin Decall -
Comments
Thats weird, the link is in there as always
Pablo Valentin Decall
2024-02-11 15:31:51 +0000 UTCThanks bro, yes, there are a few characters that could use this body π€π€
Pablo Valentin Decall
2024-02-11 15:31:25 +0000 UTCi dont see a link in this post
Ryan Kibler
2024-02-11 14:17:10 +0000 UTCGreat job. That model could be morphed or tweaked a little to make a Nick Fury ππ»
Andy Thompson
2024-02-10 09:13:18 +0000 UTCHave fun printing Piranoid brooooo
Pablo Valentin Decall
2024-02-10 02:03:06 +0000 UTCThanks
Brian Galvan
2024-02-10 02:00:19 +0000 UTC
