September Miniatures: Undertaker Set & Embalmer Set & Apprentices Set & Explorers Set (DOWNLOAD)
Added 2021-09-04 08:01:17 +0000 UTCHello everyone, this month we have a lot of minis ready to print, we leave the links to download them a little further down in this post.
We have just sent the mails from MMF to all of you who were Patreons during August so that you have the August release always available in MMF, if you were Patreons in August and you haven't received the mail send us a private message in Patreon and we will solve it as soon as possible.
The September release is no longer available for download, if you were Patreon during September, send us a private message and we will give you a password so you can download it.
Sync:
https://ln5.sync.com/dl/e7cc71360/3qptvxrp-a5kcwkz2-m42s3856-6pakpqhr
You have three versions of each file:
- STL models, In case you prefer to make the supports yourself
- STL with supports, ideal to resize in the slicer that you like.
- Lychee format if you want to play with the supports.
If you do not know Lychee I leave here the link to download it, it is worth trying.
Past Releases
If you have joined recently and you have missed some cool models that you want to print you can still get them on our MyMiniFactory profile. Models from each line will be available there after we release them on Patreon. We have a special discount for our Patreons so use the code DONRIC to get a -50% discount.
Thanks to all of you for your support and happy printing!!
Comments
The undertaker is good, but it can be better... the coffin does not fit in the carriage, the carriage has no drawbar and thus drives magically. A carriage with a drawbar and horse would be perfect, a coachman on the box would round off the whole thing. Otherwise a perfect support of the models for a flawless print. Good Job
2021-10-16 09:31:25 +0000 UTCJust found you, I love people steppin up to fill niches mostly ignored. Wish you were a MMF Tribe... Luckily they advertised a set to me there and here i am.
Rastagnon
2021-09-28 15:51:27 +0000 UTCOne suggestion: on The Undertaker set, anyway to brace or strengthen the front wheels axel on the underside of the carriage? The connection point between the carriage and the beams holding the axels feel very weak compared to the back wheels. On another note, amazing work! I love it
2021-09-27 01:13:59 +0000 UTCThanks!
L'il Doodie
2021-09-26 16:18:18 +0000 UTCI had to scale down to 80% when printing some of the tables and market stalls etc to match regular 28mm minis. I suggest loading the unsupported model into your slicer along with a miniature you know well. This way you can compare the size of the model you want to print with something familiar to you. Scale it accordingly and take note of the %. This way you can scale the supported model with the same % before printing.
2021-09-23 08:10:06 +0000 UTCI asked them this yesterday and they said "Hello, the scale of all the content is 32mm, although sometimes it is difficult to be sure. Thanks!"
Baublebuyer's 3D Prints
2021-09-22 22:13:14 +0000 UTCWhat scale are your minis? 28mm? or 32?
L'il Doodie
2021-09-21 17:27:23 +0000 UTCI always remove supports after the alcohol bath, they are soft and can usually be pushed off.
Levi Brooks
2021-09-09 20:15:53 +0000 UTCSnip them at the connection point on his hands, paint the model then reattach. There is no way you will be able to get into his chest area otherwise.
shading chaos
2021-09-07 07:08:43 +0000 UTCRemove the supports before curing, soak it in hot water and remove the supports while submerged in the water. Use clippers and a razor blade. Be CAREFUL. 😉
B. Griffith
2021-09-05 19:52:36 +0000 UTCAnyone have luck printing apprentice wizard and have magic come out? It is so thin I can't get supports off without it breaking some part of it. It looks really cool but would like to actually get a good version. Suggestions welcome.
Brent Kutz
2021-09-05 18:26:34 +0000 UTCAwesome stuff as always!
Levi Brooks
2021-09-05 05:16:03 +0000 UTCOne last wish would be kids playing. Fighting with wooden swords, various kid games, marbles, hide and seek, tag. A dog or two and cat, a boy and girl leaning forward, lips first for a kiss.
Kevin Goodrich
2021-09-05 03:37:59 +0000 UTCOne group that I would love to see is a drunken party in a bar. A friar playing a lute, drinking games, bartenders and bar, passed out drunks, a drunken fight and so on.
Kevin Goodrich
2021-09-05 03:36:06 +0000 UTCThese apprentice minis are by far my favorites ! Maybe some others for the other jobs ? Fisherman, cleric, assassins, butcher …
Cedrick BLIGOUX
2021-09-04 18:54:35 +0000 UTCMore amazing miniatures (as usual). Can’t wait to get these on the printer!
Donnie Noland
2021-09-04 15:32:09 +0000 UTCThese are awesome! (That Undertaker is soooo good!)
Steven Crawford
2021-09-04 08:51:15 +0000 UTC
