HYDRA PBO2 DIAGNOSTIC SETTINGS
Added 2022-03-16 11:47:41 +0000 UTCDear friends, I want to show you a list of settings that will be available for the new diagnostics. You will have an unlimited opportunity to customize the tests for finding CO (PBO2). You can customize the duration of each test, the load level, the size of the FFT task, the initial CO, and even the CO step. Finding a CO will become very easy, no instructions needed. A release is scheduled for the end of the month.
Special thanks to everyone who responded to my request for help for my relatives. They are in Hannover and they are safe.
A few words about stopping. I am still in Kharkiv and every day we are bombarded en masse. More than 600 apartment buildings have already been destroyed. Yesterday a historic house in the center of the city, which was built in 1919, was destroyed. It was untouched by the Nazis, but destroyed by the russians...
Fortunately there is light, which means there is internet, heat and water. We managed to get food and fuel (for the generator) yesterday. Your support at this moment is invaluable to me. I bow to you. Let's keep holding on, I believe that the victory will be soon.
Comments
AMD PBO2: GET CO: gets me -30 on all cores (for all three of my processors) - is this normal?
Rahid Ahmed
2022-04-22 17:52:44 +0000 UTCSomething in BIOS must be blocking communication to CPU/iGPU thus Hydra's commands fails. I've played around almost all settings in BIOS and settled with "Default/Auto" except Memory set to XMP profile.
Rahid Ahmed
2022-04-16 00:08:14 +0000 UTC***HYDRA 1.1E PRO by 1usmus*** 04/14/2022 15:13:15 Microsoft Windows NT 6.2.9200.0 AMD Radeon(TM) Graphics AMD64 Family 25 Model 80 Stepping 0, AuthenticAMD AMD Ryzen 7 5700G with Radeon Graphics ASUS ROG STRIX B550-I GAMING BIOS ver. 2603 SMU ver. 64.60.00 DRAM speed 3600 MHz 15:13:15: CMD_FAILED 84 15:13:15: CMD_FAILED 84 15:13:15: CMD_FAILED 84 15:13:15: CMD_FAILED 84 15:13:15: CMD_FAILED 84 15:13:15: CMD_FAILED 84 15:13:15: CMD_FAILED 84 15:13:15: CMD_FAILED 84 15:13:15: CMD_FAILED 73 #############################################
Rahid Ahmed
2022-04-14 19:14:38 +0000 UTCI also get CMD_Failed 5, after 10 retries of PCI-MUTEX holding time has expired!
DeeJay
2022-04-14 18:26:36 +0000 UTCas of now i'm going to leave Hydra deactivated on my 5700G until next update. Hopefully this new release will unlock potential of this lil 8Cores w/ iGPU beast.
Rahid Ahmed
2022-04-09 10:20:20 +0000 UTCThanks for your response Kenjiin. I've restarted serveral times Intentionally. Majority of the time when i have Hydra (activated) cpu unexpectedly crashes. I can't figure out what is it preventing Hydra to access /modify/execute commands.
Rahid Ahmed
2022-04-09 10:16:43 +0000 UTCwhenever it's a cmd_failed you should just restart. then check your events flagged in settings. sometimes windows has this tendency of ending processes that use too much cpu during startup. most of the time it cancels sensors from the lib.
2022-04-08 05:37:17 +0000 UTCHi Yuri, I'm Spanish. In my country we Spaniards are collecting resources to send them to Ukraine. We are very affected by what is happening in your country. We want this absurd situation caused by Russia to be requested as soon as possible.
Juan Carlos Serrano
2022-04-01 19:02:51 +0000 UTCfirstly my cpu bin is platinum:gold on both ccd the lowest is 204. so out of the box my cpu was hitting 5.1-5.2 on boost. then i readjusted settings inside the bios along with a hardcore ram oc. i have a 4400mhz kit downclocked to 3733 with 14-14-14-36 timings. on hydra itself i redid the the co diagnostics on avx then one by one i did the co adjustments in pbo2 settings thats when i noticed most of the cores were capable of doing 5.0-5.1. so i went back into bios and starting messing with the base clock kept lowering it until it wouldnt post and changed it to the last postable setting. icant really go into much more detail because the pass was for hwbot and overclocking team tournament. but i will say its on custom loop cooling no LN2. took about 2 days and lots of no posts and a lot of cursing im sure my neighbors can attest to that hahaha also its not my daily tune. my daily tune is like 32k profile choice is a modified normal. with 1.35 istead of 1.375
2022-04-01 10:24:01 +0000 UTCHELP!! I get following errors no matter what version i try... *************************************************************** ***HYDRA 1.1E PRO by 1usmus*** 04/01/2022 02:05:37 Microsoft Windows NT 6.2.9200.0 AMD Radeon(TM) Graphics AMD64 Family 25 Model 80 Stepping 0, AuthenticAMD AMD Ryzen 7 5700G with Radeon Graphics ASUS ROG STRIX B550-I GAMING BIOS ver. 2603 SMU ver. 64.60.00 DRAM speed 3600 MHz **************************************************************** 02:05:37: CMD_FAILED 84 02:05:37: CMD_FAILED 73 CHECK_FREQ_MT: System.IndexOutOfRangeException: Index was outside the bounds of the array.at A.?.(Int32[] ?, Int32) Phoenix ready!
Rahid Ahmed
2022-04-01 06:49:07 +0000 UTCKenjiin how did you made to go 11k over the basic result? :D holly!!!
iNerd
2022-04-01 05:14:57 +0000 UTCmost of the time stability or lack of stability is ram associated. make sure you have no ryzen master settings in registry as this will cause serious instability. sounds like incorrect pbo settings in bios and vrm settings. i really havent had a problem with hydra .. ctr gave me so many issues.. just need to read on the web too how certain things affect each other especially in zen 3 cuz its really sensitive with soc ..
2022-03-31 08:00:15 +0000 UTCMe too! It keeps freezing my system and stopped using it. Instead of useless new features, I think main focus should be on developing some sort of stability of the program.
2022-03-29 11:36:02 +0000 UTCAnd my system still randomly freezes... I've just stopped using HYDRA for now. I've got way more important things going on in my life ;)
Alexander Wünsche
2022-03-28 23:51:58 +0000 UTCplease be safe and keep your family safe !
Mark A Krista
2022-03-27 02:13:11 +0000 UTCim finally done tuning...i think its the best i can for now.. https://ibb.co/xYn7M1M
2022-03-19 11:24:47 +0000 UTCYuri, I cannot begin to imagine what you are going through. You have my admiration and respect. I will continue to support you for as long as needed since this feels like one of the only ways I can help. I hope that this all comes to an end soon with Ukraine coming out on top. Stay strong!
2022-03-18 20:59:42 +0000 UTCHi Yuri, I cannot imagine what life must be like at the moment for you and your family and friends. This madness has to stop soon. I look at the Ukrainian people in awe of their tenacity and unwavering unity in such dark times. I wish that were the case in my country. Your work work is excellent and I will continue to support you as long as I am capable. I wish you strength and resilience. Glory to Ukraine.
2022-03-18 11:26:54 +0000 UTCYuri, I will keep supporting you as well, even if you need to take a extensive brake. It's absolutely horrible what is happening over there :( keep safe, ! I have no words for it :(
2022-03-17 22:49:38 +0000 UTCYuri, much has been said by your ardent fans and supporters...I'm here to say I'll keep supporting and am really blessed to have come by your work! I have a lot of respect for you and dedication to work transcends every medium. You should be proud! My prayers with you. Please don't hesitate to take a defensive action when the time comes...it's much more important to survive and think of new ways to fight. This evil will soon stop...I'm certain
2022-03-17 11:24:30 +0000 UTCJust hoping you , your family, your friends, and all of your loved ones will make it through this safe and able to move on and to this conflict ending sooner rather than later. And just Thank You for continuing to keep your supporters updated with so much information on the project, --- without getting in to speaking too lengthy or maybe incorrect , just a great handshake and Thank You for spending your time on this project, for all of us.
James Tiller
2022-03-17 04:59:11 +0000 UTCI hope they put that Putin down for all this.
MoistDreams
2022-03-16 16:46:58 +0000 UTCHi Yuri. Wishing you the best from the USA where we sit fat and warm and watch your people die on the news. I am so sorry that our politicians cannot find the courage to secure your air space and deliver the weapons that you need to protect your country. No one wants WW-III but every day they cower to Putin's nuclear threats is costing the lives of innocent civilians and telling the dictators of the world that they can get away with anything if they threaten to use nukes. Please stay strong and stay safe!
Bill Bittel
2022-03-16 15:09:06 +0000 UTC
