CTR 2.1 RC5 - DYNAMIC P1 and P2 PROFILES (AVX2/Light load)
Added 2021-04-05 16:41:26 +0000 UTCExample #1 (AVX2/FMA3)
Smallest FFTs CCX1 3800 CCX 2 3800 (Stock + 3800C16 DRAM) VID 1.05
Smallest FFTs CCX1 4575 CCX 2 4450 (CTR + 3800C16 DRAM) VID 1.175
+ 775 / 650 MHz(!)
Example #2 (Light load)
https://www.youtube.com/watch?v=wyh_zIc3s6o&list=PLRUWb5tFeR8IlOOS9gX6E1z7TnRkmz0GB&index=2&ab_channel=YuriBubliy
CPU-Z MT CCX1 4300 CCX 2 4300 (Stock + 3800C16 DRAM) VID 1.2
CPU-Z MT CCX1 4775 CCX 2 4600 (CTR + 3800C16 DRAM) VID 1.175
+ 475 / 300 MHz and -25mV (!)
This month you're in for a hot mess :)
RELEASE DATE - MID APRIL !
Comments
Anxious to see CTR 2.1 R5 :-)
Mitch Walker
2021-04-12 20:31:29 +0000 UTCSure thing! I’d love to! Though, that’s going to have to wait till Mid-May... That APU and I are on different continents rn. 😅 Hopefully also getting the 5700G or 5800G if that turns out to exist.
Henry Curtis Pelgrift
2021-04-05 21:50:50 +0000 UTCPreviously, by mistake, it was possible to enable AVX Heavy checking, but that module was completely inoperable. Now the dynamic profiles will be able to handle requests automatically. Renoir and Zen 3 are the only processors that will be able to do this in CTR :) we can check it on your processor (APU for example) :)
Yuri Bubliy
2021-04-05 20:22:44 +0000 UTCAh! Is this related to why AVX Heavy is disabled in RC4? Like you were tweaking those?
Henry Curtis Pelgrift
2021-04-05 19:46:00 +0000 UTCCareful Yuri. At this rate you're gonna end up chained to a post in some basement at AMD working for peanuts :(
Krewd
2021-04-05 19:05:42 +0000 UTC:D
Yuri Bubliy
2021-04-05 18:43:44 +0000 UTCPX will also gain dynamic capabilities. The maximum frequency will also depend on the load.
Yuri Bubliy
2021-04-05 18:43:35 +0000 UTCWaiting desperately for this! Hopefully can get a little more boost on the PX thanks to this.
Tanveer Jugpal
2021-04-05 17:34:53 +0000 UTCReady for the Hot Mess.... use me and abuse me :D
James Tiller
2021-04-05 17:30:26 +0000 UTC
