Dungeon Monsters! - April Monthly Release
Added 2021-04-05 09:03:46 +0000 UTCNo matter how many you defeat, there always seems to be more waiting to be smashed. But where do they come from? Don't expect much heroism this time, this April is only full of Monsters.
This pack is specifically designed to replace the monster dice of Masmorra boardgame, but you can use them to populate any of your campaigns! Without further ado, let's take a look at our Minor and Major monsters.
Also one of the monsters is a bit special, so I have prepared an alternative version. You can see that the gelatinous cube still has the remains of an unfortunate victim, but in case you prefer it, a completely smooth cube is also included. Not only that, the plain version has a hollow space so you can place some of your minis inside, like this half-dissolved skellie. NOM!
As I said before, this set is intended for the "Masmorra" game but it is important to remind that this is not an official product or related to CMON Games.
Want the complete challenge? If you are looking for bosses, you can find them along with other previous works on my Thingiverse profile.
Lastly, we have a new code for MMF. As always, this code will give you a 60% discount on any of the articles from past months without limit, until the end of the month:
GM564_APR
This is all! I hope you have some amazing adventures fighting this monstrous group and see you soon with news about next month's launch!
**Files were removed at the end of April**
Comments
Looking back through my archives for the past 4 years or so and I seem to be missing these files and they aren't on MMF, can I get them somewhere please?
Greg Findon
2024-10-22 10:02:21 +0000 UTCHow could I get these monsters?
Fito
2021-11-03 14:23:56 +0000 UTCThat’s awesome, thank you!
fnord friendly
2021-06-30 18:19:27 +0000 UTCHi! May files will be added soon. April files are a bit more special case and I will make an specific post about it shortly. In short, there will be a way to get them and it will be for free.
Carlos Montero
2021-06-30 05:40:58 +0000 UTCDitto, these and the May files aren't in MMF...
fnord friendly
2021-06-27 19:17:09 +0000 UTCWhere are the files? There are not in your store or here. I want to print this so bad.
Angel
2021-06-09 00:24:26 +0000 UTCGot it! Thank you. I sent you a DM btw.
Andreo
2021-05-02 06:11:28 +0000 UTCHi! check my message bellow! (just to be sure you don't miss it)
Carlos Montero
2021-05-01 06:30:00 +0000 UTCHi! check my message bellow! (just to be sure you don't miss it)
Carlos Montero
2021-05-01 06:29:54 +0000 UTCHi! check my message bellow! (just to be sure you don't miss it)
Carlos Montero
2021-05-01 06:29:37 +0000 UTCHi! check my message bellow! (just to be sure you don't miss it)
Carlos Montero
2021-05-01 06:29:30 +0000 UTCHi! check my message bellow! (just to be sure you don't miss it)
Carlos Montero
2021-05-01 06:29:25 +0000 UTCDo not worry! I am aware that time zones are always a mess. Shortly all active patrons will receive a message with a Drive link from where you can download the files. I have been doing this for a few months now, so if you missed any of the previous, please check you Patron Inbox!
Carlos Montero
2021-05-01 06:28:19 +0000 UTCmissed them also if i can get a link
Dylan Yanke
2021-05-01 05:59:25 +0000 UTCI was waiting for you to create the new option I had been discussing with you and so I missed getting these files as well as you had mentioned you were going to change the deletion time so that folks in the West Coast of the USA would be able to get them before midnight. Can you send a link out to your Patreons for these files please as I thought that the file cut off had been moved to match up with the USA patreons?
Thomas Anders
2021-05-01 05:49:06 +0000 UTCI missed it too. Thought I downloaded them already, but apparently I didn't. :(
Mark Senger
2021-05-01 00:36:22 +0000 UTCYeah it's April 30th here, 8:30 PM.... and you removed the files already?
Alexandre Valois
2021-05-01 00:31:51 +0000 UTCDang! It's just 7:12pm and the files are already gone. I wasn't able to download them. Man, I forgot you were several hours ahed than us. I really wanted this! Is one of my favorite games :( I hope you can share a link for it
Andreo
2021-05-01 00:12:04 +0000 UTCyou are the very best!!!!
Tello
2021-04-24 06:50:16 +0000 UTCand the following D&D serie? pleeeeeeeeeeeeeease
Juan Francisco Fernandez
2021-04-14 08:58:49 +0000 UTCOh YES!!! HEROQUEST!!! Thanks!!
Daniel
2021-04-10 19:02:28 +0000 UTCHi Luiza! Unfortunately, for various reasons there will be no voting this month. I will do a more extensive post about this, but as always there will be some compensation for the executive tier patrons and I have decided that the next release will be about Heroquest (which was second in the last poll)
Carlos Montero
2021-04-10 11:28:08 +0000 UTCCarlos, teremos votação de tema para o próximo mês? Ou podemos esperar mais monstros do Masmorra para maio?
Luiza Tavares
2021-04-07 20:10:58 +0000 UTCMy only concern there would be the possible line left between the already cured resin and the new one, it would depend of the resin itself. To keep the mini in place, maybe a strip of transparent tape could be helpful. And YES! I do usually wear gloves, mask and safety glasses in any action related to resin! Very Important!
Carlos Montero
2021-04-07 18:46:30 +0000 UTCIf you talk about the hollow cube, maybe putting it on one of its corners is the best option, but as the inside is kind of round, it could even print with any supports.
Carlos Montero
2021-04-07 18:42:57 +0000 UTCAll the minis would need supports!
Carlos Montero
2021-04-07 18:41:10 +0000 UTCI wonder if it would work well... First paint mini, then put it inside the transparent hollow cube, pour in some trasparent resin of the same color, let it settle, cure with UV, continue until "full" (probably better have some liquid resin in before you put mini in) And remember, WEAR GLOVES WHEN HANDLING LIQUID RESIN, even when not printing!
Jupp3
2021-04-07 18:16:32 +0000 UTCI think i'll use some green translucid resine for the hollowed one
Alex Pla
2021-04-07 06:24:24 +0000 UTCAny advice for the cube's supports ??
Alex Pla
2021-04-07 06:21:20 +0000 UTCThey would need supports.
steve saddler
2021-04-06 13:43:26 +0000 UTCdo these print without supports? Or will they need to be supported?
Joshua
2021-04-06 02:11:53 +0000 UTCTodos estão maravilhosos, parabéns pelo trabalho fantástico
Luiza Tavares
2021-04-05 10:24:40 +0000 UTCWOOOOW! They are better than CMON minis!
Juan Francisco Fernandez
2021-04-05 09:22:46 +0000 UTC
