WARM UP YOUR PRINTERS, THIS MONTH’S PRESENT FOR YOU IS…
Added 2021-04-27 17:26:27 +0000 UTCThis magnificent Barbarian Marauder Warlord!
One Barbarian Warlord in your army will ensure that the bulk of your horde is more efficiently commanded in battle.
This Legendary Barbarian Hero will only be available until 30 of April. Hurry up and download it before it's gone!
In a few minutes, you will have access to the STL download link
Be proud of your Old School Heroes and enjoy.
With Avatars of War Legendary Heroes, you will find honor and glory on the battlefield.
Old School Heroes rock!
Comments
Oh yes please: include the chitubox files. The current pre-supporting shows *many* unsupported island. Are they manually adjusted or just the standard pre-support from the tool??
Fix Bornes
2021-04-30 11:27:56 +0000 UTCamazing
Avishai Victor Ankri
2021-04-29 21:01:04 +0000 UTCThanks very much for the offer! If we can test on different printers then we could provide a generic supports file, and add printer-based supports for those printers and models that could be tested this way.
Gaelion Longsdale
2021-04-28 20:20:16 +0000 UTCProviding chitubox files so supports are editable sounds indeed like a good option. Thanks very much for the tip!
Gaelion Longsdale
2021-04-28 20:16:59 +0000 UTCI am not an expert but I manage, and I am one of your members I can check the files before publishing them if it improves the quality.
rurk admin
2021-04-28 19:44:03 +0000 UTCcould you give chutibox files, so I can modifie support, autoomatic support with chutibox isn't perfect, it's not a problem of slicer, I can give you an exemple if you want. look at batch2_04_skeleton-archer_supp under the jaw, a support is missing so the head cannot be printed correctly. I print a lot of patreon figurine, many of them provide the chuti files to help adjust the supports. the series of 4 skeletons with shield cannot be modified without the chuti files. I will print the series of figurines modified by me and I will see tomorrow morning if it is better
rurk admin
2021-04-28 19:40:21 +0000 UTCWe print-test all models with our own SLA printer (wich has its own slicer and support software). The supported STLs are generated with Chitubox, and we add all the max supports that Chitubox suggests so that they would work on as many 3d printers as possible. Maybe there is another software that works better to generate supports that will work with many different 3d printers? Any suggestion is very welcome!
Gaelion Longsdale
2021-04-28 19:17:07 +0000 UTCWe print-test all models with our own SLA printer (which has its own slicer and support software). The supported STLs are generated with Chitubox, and we add all the max supports that Chitubox suggests so that they would work on as many 3d printers as possible. Maybe there is another software that works better to generate supports that will work with many different 3d printers?Any suggestion is very welcome!
Gaelion Longsdale
2021-04-28 19:15:36 +0000 UTCI would say, don't bother including support files that anyone can create automatically. I was under the impression that the supports offered were created by hand and test-printed.
Victor Jalencas
2021-04-28 18:39:56 +0000 UTCThe auto supports for chitubox are horrible. I have had better success doing manual supports than auto on the same print.
matthew follansbee
2021-04-28 17:54:04 +0000 UTCI printed several models among the skeletons and the warrior of chaos. all miniatures start out fine but some parts are unsupported or poorly supported and the parts end up coming off. I can send the loose items by message. there are 5 or 6 figures which systematically pose a problem the others work well
rurk admin
2021-04-28 17:01:56 +0000 UTCThanks for the info. Did some parts did not print, or the minis broke when separating supports? The supports are made with Chitubox, default settings and "All" option. Maybe another software we should try for this?
Gaelion Longsdale
2021-04-28 13:00:23 +0000 UTChello, very beautiful figurines, but all the supports are to be reviewed. none of the miniatures came out correctly on a 20th tested on the set. I have a mono x anycubic and a mars on which i usually have no fail. could take that into account for the next few months.
rurk admin
2021-04-28 12:52:59 +0000 UTCFrom April we will be sharing all Patreon's releases through a MyMiniFactory usergroup, so if you are registered on MMF, you can find all the files on your MMF library. I think this is indeed the most convenient way. Of course, if you are not on MMF, you can indeed email us if you want to have again access to any of the files that were released in past months.
Gaelion Longsdale
2021-04-28 01:25:44 +0000 UTCWill you be adding the stls to your own store in case we have issues? For example it's the 27th and this one's going to be up for 3 days. Sometimes we might miss it.
Joe Kushner
2021-04-28 00:05:46 +0000 UTCYes, it's the Marauder Warlord pictured on this post. Glad you like them! Thanks!
Gaelion Longsdale
2021-04-27 23:09:32 +0000 UTCI can't seem to find the Legendary Barbarian Hero, did you mean the warlord? Don't want to miss one of your minis as they are awesome.
TombMedia
2021-04-27 21:26:25 +0000 UTCGlad you like it, it's a pleasure!
Gaelion Longsdale
2021-04-27 18:57:09 +0000 UTCYou deserve it!
Gaelion Longsdale
2021-04-27 18:56:51 +0000 UTCEsperamos verlo!
Gaelion Longsdale
2021-04-27 18:56:39 +0000 UTCGlad you like it!
Gaelion Longsdale
2021-04-27 18:56:20 +0000 UTCAwesome! I always loved Chaos Barbarians! This one looks great!
Glitterwolf
2021-04-27 18:37:35 +0000 UTCThis was a pleasant surprise!
Grant Dawson
2021-04-27 18:27:10 +0000 UTCA ver ... a ver ... a ver ... porque haceis todo lo que normalmente no me gusta y quiero pintarlo!!! Mola mil este barbaro!
Kinslord Mpf
2021-04-27 17:36:40 +0000 UTCwow unbelievable!
Amer Spahić
2021-04-27 17:28:42 +0000 UTC
