The Armorer bust (Pre-Supported) *All tiers New Release*
Added 2023-05-06 23:27:19 +0000 UTCGreetings friends
The Armorer is now available for all tiers.
You can find the files in the link below-
Printing Tips
Resin printing
The model comes pre-supported. Support service by Charro Zuck.
Supports, Resin print and photography by Charro Zuck.
FDM printing
For FDM users the model comes split in 3 pieces. You have to use supports to the helmet and the belt accesories.
I hope you like this model as much as i enjoyed sculpting it.
Already working on the next release which is going to be the cyborg head.
Have a good weekend everyone and thank you for your support.
Fotis
Comments
made this today, and its AWESOME. did full size on the X2 (used the Jupiter files)
Dave East
2023-07-13 18:34:19 +0000 UTCUnsupported versions are all 165mm assembled with the base , presupported can’t be the exact same size because the support structures cannot be the same . Also the armorer has a separate head and it’s normal to have a bigger size because we always try to do maximum scale with the pre-supported files.
Fotis Μint
2023-07-09 18:50:21 +0000 UTCyep, pre-supported. but i've tried the unsupported versions as well - and the scales are different on them as well. although for the unsupported files, Boba is the largest (by some way) and Mando and the Armourer are probably closer to the same scale.
Derek Souter
2023-07-09 18:46:34 +0000 UTCPre-supported you mean or not?
Fotis Μint
2023-07-09 18:42:52 +0000 UTCMando is slightly smaller than Boba, and both are much smaller than the Armourer.
Derek Souter
2023-07-09 18:42:24 +0000 UTCI don’t remember the exact scale of each because it’s been a while since mando and boba, but All busts are scaled at 165mm including the base without supports, and the pre-supported ones are scaled to maximum m2 size usually. Hope this answers your questionn
Fotis Μint
2023-07-09 18:34:00 +0000 UTCis there any reason why this, the Mandalorian and Boba Fett sculpts all appear to be different scales? I love them all, but the difference in sizes is making it tough to get a nice set printed.
Derek Souter
2023-07-09 18:28:09 +0000 UTCThis is the way
Vinnie Simonetti
2023-05-11 11:31:29 +0000 UTCawesome !!
DarkTeck 3D
2023-05-09 01:59:01 +0000 UTC
