nicFW900 V4.00.15
Added 2025-05-25 11:44:32 +0000 UTCFix audio mute after key tone
Added per channel frequency clarifier (100 Hz per unit adjustment), a value between -2 to +2 will usually be enough to bring an off-frequency repeater into spec.
Fixed bad settings offsets in SPI app
AM AGC is now continuous, now uses the PWM GPIO Pin Radtel created specifically for this purpose rather than messing with the BK4819 gain settings. (I had to work out how to enable PWM)
I forgot to add the Clarifier setting to save channel CSV file. will be sorted for .16
Comments
Hello @nicsure. I don't know if you remember, but few days ago I reported that despite following your instructions to the letter, my HT will not transmit. Today I tried with the new revision V4.00.15 and it worked just great. There are some glitches, but now I can transmit and scan as shown on videos, which is great. Thanks for all your effort!!.. Can't wait to see the RT880 progress.. Thanks again.
Patricio Ruiz-Tagle
2025-05-27 02:26:13 +0000 UTCIt's deliberate, it's because RFi compensation is turned on. Screen updates cause RFi, updating the countdown requires updating the screen, so it would kind of defeat the purpose of the RFi compensation.
Marcus Dudley
2025-05-26 19:03:13 +0000 UTCI think I’ve spotted an issue with this release. The scan resume doesn’t update the screen. When set to say 10, the 10 is displayed but doesn’t count down. The timeout is honoured though.
Adam Mealings
2025-05-26 18:19:46 +0000 UTCI've been scanning Airband channels constantly since before I released this trying to make it happen, so well over 24 hours now and not gotten it once. It's still going now as I type.
Marcus Dudley
2025-05-26 16:52:18 +0000 UTCThis one is working even better for me now, the stuttering problem is happening much much less, a week or so ago scanning for 5 minutes would be enough to guarantee it would happen, between all the updates you've put out, yesterday I left it for an hour and it didn't happen.
David
2025-05-26 12:33:00 +0000 UTC-10?? Wow that repeater is way off.
Marcus Dudley
2025-05-25 19:24:46 +0000 UTCThanks for channel frequency clarifier, it works well. My one off repeater requires-10. Works good
Stacy Poteet
2025-05-25 18:44:32 +0000 UTCThanks! Even with squelch at 2 now the closing time it's much faster.
RedJohn
2025-05-25 13:20:23 +0000 UTCThank you for the SPI settings fix!
Ferrel Wiley
2025-05-25 11:57:53 +0000 UTC
