Patreon Bonus: Fruit Bat Magnet!
Added 2023-02-19 21:04:01 +0000 UTCHello!!
I just added the Fruit Bat Magnet to the downloads post. Enjoy!
Cheers!
Matt
Pictured Models printed in...
Pastel Matte Rainbow filament is Ziro Macaron***
Pink Gradient is ProtoPasta Scarlet Symphony
**Download from the Pinned "Current Download Links" post**
*All magnets use 10mm x 2.6mm magnets like These On Amazon***.
Print Settings For Magnet:
- 0.16mm layer height
- 3 walls with a 0.4mm nozzle (could do 2 walls with a larger nozzle.)
- 10% Lightning infill (lightning infill is great for these because it keeps the weight down and only creates infill where needed. Keeping the weight down helps the magnets be more effective.)
- 5-6 bottom layers (gives a little extra strength to the magnet attachment area.)
- If your printer struggles with bridging, you may need to add support inside the magnet slot. Give it a try without and see how it goes.
**Download from the Pinned "Current Download Links" post**
***As an Amazon Associate I earn from qualifying purchases.
Comments
I just printed my first of your magnet models last week. I used the magnets you suggested and they stick out just a bit. Would it be possible to drop the hole a little deeper so the magnets don't risk scratching what they stick to?
Kyle
2023-02-21 17:31:04 +0000 UTCLove this design. Have 9 of these printing now! Thanks Matt!
Gerri Tokar-Hines
2023-02-20 00:47:54 +0000 UTCThe regular Leopard Gecko can be purchased through MMF using the coupon code. The Excusive Licking one will be Out-of-the-Vault and available again in April.
MatMire_Makes
2023-02-19 21:28:27 +0000 UTChey! just wondering if there will be a return of the leopard gecko?
HummingBird Designs
2023-02-19 21:18:25 +0000 UTC
