ToHardware

Release 001 - First Generation Starter AC VER. 1.2

Added 2023-07-21 07:10:57 +0000 UTC

This is an update for the First Generation Starter AC.

What's updated with this release?

replaced all Lychee files with only STLs
created a .1mm tolerance set of parts for resin printers with a PPI of 500 or more
merged all rivet pieces with the parts to eliminate wasted resin from potential print failures
adjusted the jaw guards for the HD-GRY-NX head
completely redesigned the XCA-00 core and its assembly.
fixed an issue where the AN-201's forearm was challenging to assemble when inserting the elbow joint
fixed an issue where the LN-1001-PX-0's shin section did not have a proper mortise for the knee's corresponding tenon joint
fixed an issue where the LN-1001-PX-0's shin insert had incorrect dimensions preventing proper assembly
fixed the assembly of the WM-S04-1 where the entire body is now one whole piece in an effort to eliminate unsightly seam lines.
fixed the design of the WM-S04-1 launch and exhaust tubes

In the download you will find the following files and information:

500+ PPI Resin Pre-Supported STL files of the Starter AC
800+ PPI Resin Pre-Supported STL files of the Starter AC
Instruction Manual

If your printer is between 500 and 750 PPI, use the 500+ PPI files

If your printer is between 800 and 1250 PPI, use the 800+ PPI files

Those of you who are interested in printing these via FDM; I will be trying to get FDM versions of all releases handled by the time the Third Generation Starter AC has been made.

EDIT: Release has been deprecated