Early Release: Flexi Factory Chicken

Thank you everyone for your patience while I finished up testing. Especially with pop-in features, I like to make sure everything fits correctly :)

I have received hundreds of requests for a chicken, and wanted to take the opportunity to make improvements to the wings. Watching my wife hilariously trying to impersonate a chicken running around with little tucked wings was um, ... helpful!?!

For you AMS printers you will find a head with bigger pupils. I felt these eyes worked better for multicolor. Smaller pupil for single color.

Happy Printing -Dan

*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :)

Print tips and Info: 

• I test between 50% and 150% for functionality. BUT... I do not suggest smaller than 65% for this model. The links and footprint are tiny so detail will be lost and it could lead to failures. High quality materials and settings should be considered the smaller you go. The wings could be especially fragile.

• STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

• I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality.

• Make sure you have good adhesion. I always use a glue stick.

• Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: https://www.amazon.com/shop/flexifactory     *As an Amazon Associate I earn from qualifying purchases

• 1st photo is 90% and 70% 3MFs in Amolen Rock PLA Yellow Feldspar, Amolen Tigerwood, CC3D Marble and Bambulab Matte Lemon Yellow

• 2nd photo STLs are 150% , 110%, 100%, 70% in: Cookiecad Unicorn, Ziro Matte Tropical, Ziro Peach Sunrise

• 3rd and 4th photo STLs are 150% in: Cookiecad Unicorn, and 100% and 90% 3MFs in: Cookiecad Sunrise, Hatchbox Orange, Sunlu Black and Bambulab Matte Lemon Yellow

• 5th photo STLs are 115% and 100% in: iSANMATE Rainbow and Ziro Peachy Sunrise