Updated Link to STL Files (Wick Wedge Update)
Added 2021-11-05 07:20:31 +0000 UTCThis folder includes all featured Hoocho STL files that have currently been featured in videos.
These files are for you only.
Please do not share the files.
Yours and others Patreon support keeps the channel going and allows me to create niche content and creations like these that the YouTube algorithm (and advertisers) do not appreciate as much as you and I.
Thank you for your support and enjoy the files
Love Hooch
https://drive.google.com/drive/folders/1RpWwY48X1jPJzWHeKxBwQ3BXBWFBZ097?usp=sharing
Comments
Yeah link is dead :(
Simon Marangoz
2024-07-27 16:54:19 +0000 UTCThe link is dead, can you update the link?
bob rob
2024-07-05 19:46:00 +0000 UTCAll good I found it, confusing for some who has never used patreon. Thanks mate
Grant Clarke
2024-03-26 08:57:27 +0000 UTCRead the post carefully all the way through. It’s in the latest- latest file folder. None of the old folders work.
Mitchell Tomkins
2024-03-26 08:56:46 +0000 UTCI've read the post mate, I cant find the latest file, I've actually click a few "Latest files" links but always get empty. I'm missing something. cheers
Grant Clarke
2024-03-26 08:53:31 +0000 UTCLink is dead for me as well, cheers
Grant Clarke
2024-03-26 08:39:02 +0000 UTCThanks! I got it
Vincent Yee
2023-12-02 04:04:24 +0000 UTCThat’s correct. Read first post. Latest link is in latest post.
Mitchell Tomkins
2023-12-01 03:08:34 +0000 UTCLink is dead, Pls activate The link
Vincent Yee
2023-12-01 02:28:40 +0000 UTCLink is dead
Bob Lasure
2023-10-07 18:31:55 +0000 UTCDon't say it, checking youtube now!!!
Jamie
2022-02-04 23:50:00 +0000 UTCDo you have print settings for this file? Supports/infill, etc? Great stuff man!! keep it coming.
Jamie
2022-02-04 23:47:50 +0000 UTCI ended up designing my own version of the adaptor so it will fit and use the wick wedge as an insert to try and use the wicking effect of the ropes instead of just the coco in the medium.
Ken Crawford
2021-12-14 19:15:37 +0000 UTC@Croz increase your X and Y to 230mm in Cura. Those will be fine for an Ender 3.
IT
2021-12-13 08:01:41 +0000 UTCYou can increase the size of the print bed in cura settings, this allows the print bed to accommodate the prints. The original settings are smaller than the printers ability. The mini system is specifically made with thicker walls on parts of it so you can scale to any size pipe. You just need to measure the pipe and that will be the percentage you use. At full size it will fit a 100mm pipe. Therefore it scales with percent perfectly. This is outlined in the video which covers each of these models. I am answering these questions here but generally I will ignore these as it would take too long to reply to everything in this way. Please refer to video content. Enjoy the prints. Cheers.
Mitchell Tomkins
2021-12-12 23:18:36 +0000 UTCThe problem with scaling is it will scale down everything or you will distort the model. When you scale down then it will make the 50mm insert smaller as well. The file would allow us to cut down the sides of the circle to fit. I can print the Bucket no problem. Also, watch when you print the wickwedge as the outside diameter of the insert is 62mm so make sure you get the right hole saw as this is larger than the normal 2" net cup holes and smaller than the 3" net cut holes.
Ken Crawford
2021-12-12 16:28:21 +0000 UTCHoocho, I agree with Ken that the Hooch Adapter and Hooch Bucket is a bit bigger for the print area on the Ender 3 pro. I did have to scale it down to 97% to fit to the print area. Do you have to reduce it to make it fit? Also the mini items are the same size as the "non" mini buckets and adapters, are they supposed to be scaled down and if so, what % to scale to?
Croz
2021-12-12 13:36:37 +0000 UTCDo you ever share your Fushion360 files? I have several printers and my largest one is rectangular and just a little narrow for the Hooch Adapter. I want to be able to modify the rounded ends a bit. I started drawing one out myself but thought I would ask first as it would be easier to modify the Fusion360 files. I totally understand if you don't want to share those files. Kindest Regards,
Ken Crawford
2021-12-04 16:05:59 +0000 UTCHi Hoocho, I was about to make a small wicking downpipe system for growing tomatoes in a 20L pot, using the hole in the bottom and a net pot pushed through (as seen previously). Would the wick wedge be a better choice in the bottom of the pot?
Andrew Perry
2021-11-17 01:31:48 +0000 UTCThanks Bud! Looking forward to try this out.
Sean Novak
2021-11-16 11:02:16 +0000 UTCthanks hoocho got it regards Jeff
Jeff Schutt
2021-11-06 20:50:21 +0000 UTCIt's up now
Mitchell Tomkins
2021-11-06 10:51:43 +0000 UTCall good mate
Jeff Schutt
2021-11-06 08:39:13 +0000 UTCBunnings Aaron. Jeff, Must’ve left it out when I changed the folder location. I’ll put it in tonight. Sorry about that.
Mitchell Tomkins
2021-11-06 01:34:25 +0000 UTCHoocho where can I get that brand of coco. Bunnings has it but unavailable. It’s cheaper by a mile than my normal one.
Aaron heness
2021-11-06 01:07:53 +0000 UTCsorry mate but its not in this link for the new wicking print
Jeff Schutt
2021-11-06 00:26:52 +0000 UTC
