Eriss

Ries 3D model for printing

Added 2025-12-27 21:40:52 +0000 UTC

My first ever sculpt I made for 3D printing! I plan to keep 3D prints free for all patron tiers in the future whenever I make them. This first one is 3 euros for non patrons since it is not a properly sectioned model and it is my very first one, in the future when they are better quality they will likely be 10 each (for non patrons)

I made it for FDM printing, but it likely looks better with a resin printer.
(Note that in my irl example photo, the tail's edge is broken, it's because my support there broke, I reccommend printing it with more supports there)

VERY IMPORTANT! It is a full model, so there are no different sections with plugs and plugholes, I plan to do that for my future sculpts so it's easier to paint, but keep this in mind!

I included the original STL, the STL after orca slicer and the Gcode file for it. Feel free to run the stl through different settings or slicers, this was just what I did. At a 100% scale the figurine should be about 11 cm tall.

Downloadable files in this post:
https://www.patreon.com/posts/ries-3d-model-146802540