I couldn't resist. Buster Blader is one of my favorite cards. So it was a no brainer doing it's sword. It's a pretty massive weapon but not too big to take on dragons. There are two 1000mm rows for 3mm CF rods you can get from amazon for added support [That's 10x 3mmx200mm rods]. The blade is designed to sink into the handle for additional support.
Link to CF rods: Amazon.com2024-10-17 15:36:24 +0000 UTC View Post
YEP! Ya Boy has been offered an affiliate position with Anycubic....still trying to figure out how that happened, but in any case, I accepted!
What does that mean exactly?
Well, that means whenever you shop Anycubic via my personal link, I get the credit of a 5% kickback but that's not all...
I'm giving that 5% back to you in the form of printers and materials for giveaways....BUT, I digress, that's not all.
As an EXCLUSIVE PERK ...
2024-10-17 15:00:59 +0000 UTC View Post
The spin wheel has been modified to reduce friction between the power disk and the surface of the morpher. You should get some pretty decent spin action now.
2024-10-17 05:20:37 +0000 UTC View Post
Because of you guys we are now 3 steps closer to 100 Patrons! Welcome welcome!
2024-10-16 16:26:23 +0000 UTC View Post
and there's still so much more to release. I hope everyone is enjoying what we have so far. In case you missed it we have:
Wind Morphers
Lens of Truth
Red Ninjetti Ranger Helmet
Extendable Zeo Ranger Baton
Protoman Helmet
Rupees
Saiyan Scouter
Full access starts at $8.50/month and comes with the Welcome Gift.
We are 10 Patrons out from hitting 100 and once we do I'll ...
2024-10-16 14:03:55 +0000 UTC View Post
Told you there would be more. The spin wheel and all 3 disks have been modified to fit into each other so that the disc can be spun with the wheel. Files have been updated in the folder.
Also, be sure to remove all supports thoroughly to avoid friction on the spin wheel. Make sure your support settings allows easy and clean removal.
2024-10-15 21:50:05 +0000 UTC View PostI know this is probably self explanatory for some people but for those who may be confused. Here you go. Also, there was a part that needed to be modified. I can't promise it'll be the only one, but if not I'll let you know.
2024-10-15 16:08:34 +0000 UTC View Post
Well it's been a long time coming but here it is, your new Power Ranger Wind Morphers. State of the art as a glorified fidget spinner lol. Simple assembly and uses a ball bearing for seamless spinning. A 10mmx2mm magnet is used to swap out power disks and with a snug fit, the bottom portion is secured with 1 M3x6mm panhead screw. the link to the ball bearings used in this morpher can be found following the link below. 3MF file for color printers coming soon.
here's a better look at the staff. The Orb will work with an LED.
2024-10-13 15:54:40 +0000 UTC View Post
Really excited about this. Will have a tea light in the central orb to cast your Dark Magic Attack.
It will be added to the 100 Patron Milestone Reward Lot.
The power of the Ninjetti has given the red ranger an upgrade. Imbued with the power of the Ape Ninjetti, the Red Ranger has now become the master of illusions of strength.
Design: First and foremost the lips are missing. I took inspiration from Kakuranger. Their helmets are based on a basic ninja aesthetic that I wanted to use. However, unlike Kakuranger, their zords are not merged with the helmet. Like my thunderzord helmet designs, I wanted to maintain the Zord...
Like Flame Swordsman Sword or Dark Magicians Staff?
2024-10-10 21:05:27 +0000 UTC View PostIf you're working on any projects from here I ask if you can share them on your social media if you have it. On IG, Facebook groups, tikker tokkers, wherever.
Tag me or don't tag me, but of someone asks about your work or the file kindly point them in the right direction. Teetering on that 100 Patron threshold and I'm ready to get to that next level, and I know you guys are too.
Thanks in advanced everyone. You're all awesome!
Going back to my roots for a little bit with some more ranger weapons. The Zeo Ranger baton can be printed in place with minimum supports. The tip will need to be printed separately but will fit snug in the inner-most rod. When extended this will be about 27in long, perfect for cosplaying or just to have. This is the first of many collapsible weapons and I will be making more, fine tuning the design for the blade as I go. So please enjoy.
Files for this can be found in the October 2024...
2024-10-09 16:42:01 +0000 UTC View Post
Friendly reminder that deals are currently happening right now on Amazon. I just stocked up on materials, replacement parts, and gadgets for projects this morning. Probably won't be my last order.
Save a ton of money on 3D printers to so don't forget to take a look.
Another incentive added to the 100 Patron Milestone Rewards. We are still 12 Patrons away from that amazing goal! More rewards coming soon!
Thoughts and feedback always welcome.
2024-10-08 16:17:03 +0000 UTC View PostThank you everyone. Regardless of memberships status, I appreciate every one of you and I hope you stick around.
Free Members: I hope some of you make the jump to paid statues one day and enjoy the full benefits of what I have to offer. 😃
So let's break it down for the month. I've been quite the busy bee with everything I've been working on for October. Keep in mind, these are what I'm able to show in terms of being showable.
So what is it you have to look forward to?
First off is the Silver Silverizer that will convert from Gun to saber mode. Still working on the Blade but that is just about finished once I'm able to confirm design and test print.
Charizard Dragon Knight
2024-10-07 16:52:45 +0000 UTC
View Post
Get those printers ready for yet another Helmet from the Megaman Universe. Protoman is now here and this is my personal favorite if I'm being honest. The visor is what sets the tone for me and he was always my favorite against Megaman. So here you go.
This is just the helmet, unlike the Megaman Helmet, this does not have a LED puck light in the ears. If you want an LED version let me know. Also, the visor in the render is just a place holder and can be used as a stencil to cut out your...
2024-10-07 15:11:26 +0000 UTC View PostHere's the final product of this month's Lens of Truth. If you're rocking any color changing printers, highly recommended!
2024-10-06 17:58:54 +0000 UTC View Post
and I know what you're gonna say "printing money only increases inflation." To that I say, never said it was for the entire country! Best part, it's tax free! So enjoy the lavish lifestyle that everyone craves! YOU'RE WELCOME!!
All files can be found in October 2024 Folder located in the pinned post
2024-10-06 15:26:47 +0000 UTC View Post
The next helmet in the Ninjetti Helmet line will be released later on this month. Here's what it will look like. A detailed analysis of the design will be released along with the helmet. For now, just enjoy the beauty of it.
2024-10-06 00:56:09 +0000 UTC View Post
It's done! The next Statue in the line will be released Next Week with swappable heads featuring both Jason and Rocky. Can't wait to paint this one.
2024-10-04 17:12:19 +0000 UTC View Post
Something new and simple to make this weekend. The Saiyan Scouter. It's just a prop. No lights or doodads made with it because I don't know optics and I have no clue what that would do to your eyes lol. But you can customize your lens to your own style and even though it's not shown it does comes with a head band to keep it on your ear. Be sure to measure the width of your head of course.
Everything can be found in the October 2024 Folder located in the pinned post.
____________...
2024-10-04 16:30:09 +0000 UTC View Post
Been at it all morning. Three cups of coffee, but I think I'm getting there. I redid the flames along the sides and added a top pattern. I think this looks sleeker and more appealing than other designs. What do you guys think?
2024-10-03 17:39:38 +0000 UTC View Post
There's nothing like a good ol re-release, since some of you might've missed out on it. Especially something like the Lens of Truth for October. Take it with trick or treating this year! As you can see below, I did mines with a glow in the dark purple {even though it's blue -.-} and it looks super cool in person. There is a 3mf file available for those who have the fancy snazzy color changing printer and of course it's easy to print. Enoy
Files can be found in the pinned post located in...
2024-10-01 14:18:45 +0000 UTC View Post
Anycubic is trying to get back into the game with their Color Changing combo the Kobra 3.
They're doing a deal where normally it's $549, it has been cut to $379 and that's including the color changer. But if you want a 2nd color changer, that is also on sale for $289 vs the usual $319 for up to 8 colors.
Want just the printer? That's on sale for $279 vs the usual $369.
Not a bad deal for people who want to do their prints in color and perha...
2024-09-30 18:00:10 +0000 UTC View Post