Heroic Studios

What do you see???

Now's Your Chance to go Psycho! [Psycho Ranger Helmets | Re-release]

NOTE: LAST DAY TO GET 50% OFF YOUR FIRST MONTH. USE PROMO CODE JULY4th WHEN YOU SUBSCRIBE

This was released a year ago to the day. Then it was in the Welcome Pack for awhile and then they were vaulted. A lot of you new guys are obsessed with the Psychos which is a desired trait to being one lol, so here are the helmets that you guys can print and make on your own.

As with all helmets be sure you scale these properly. 210mm is about the average width of a full-gr...

SPECIAL FREE FILE | 4th Of July 1776 We The People Ball

As a special gift from me to you to Celebrate the Birth of this Great Nation, please accept this Special Edition 1776 We The People Ball. Available to everyone who's a member, Free or Paid. Uses all the same hardware as the previous balls. 3MF, OBJ and STL's are available for you guys. Enjoy your holiday, eat an extra plate for me, and I'll see you all next week!

Get your Free File Below

2025-07-04 16:19:37 +0000 UTC View Post

[New File Drop] Daredevil Ready to Go

So everyone wanted my take on DareDevil's Helmet so here it is. I printed mines and the texture that I was able to sculpt into it came out great. I ran out of red and had to go the red silk route but it came out find nonetheless.

Be sure you scale the helmet to match your head. If you need help, here's a tip. The average width of a human head is 210mm [Rought 7.5in wide] Now I scaled mines to 210mm and its a bit big on me so make sure that universal scaling option is on and I would go ...

[NEW FILE DROP] JULY KICK-OFF | Fighting Spirit Dragon Ball

This one was a pretty big deal for people but I couldn't release it last month because boy howdy we did like 20 files. So here it is, part of Wave 3 of these Themed Zord Catching machines. Everything is exactly the same on set up so ready below if you're not sure about it.

You guys have three options on how you want to print this.

OBJ - [Comes colored] For those who want to color their own Ball with a different slicer.

STL - For those who don't necessarily have Multi-colo...

June 2025 Favorite Files

K gang, you know what to do. Let me know what was your favorite file of June 2025. Multiple choice available

Loyalty Rewards Have Been Sent out Via DMs

Please check your DMs for Loyalty Rewards. They are showed above and if I happened to have missed you just let me know. It's becoming a challenged to keep up with everyone. Lol it's a good problem though.

Reninder: Get creative with it!!

No this does not have LEDs, this straight glow in the dark pla that I used in place of the green! Did this for a buddy of mines! Hope he likes it!

Last few 12hrs to get all of Junes Files including this drakkon box!

Make sure you take time out today to Download all the Rewards For June!

After today they will be locked in the back log only accessible to Legendary and Semi-Legendary Tier Members. If you're not at that tier please download everything that was released this month using the link in the pinned post.

Thank you everyone who supported me this month, and now, on to July!

K gang another peak into July

Thats a Wrap on June: Collect your Spoils!

June is over and boy oh boy what a month. Over 20 files released this month and thats a new record for me.

Make sure you download your files before July 1st. I have some pretty awesome stuff coming out for July so make sure you're ready for it!

For free members you get access to everything you see here starting at $8.50/month. We are now is the SWEET SPOT ZONE for the month so take advantage!

July 2025 tease

Somethings to look forward to for the month of July. Some straight forward, some mash ups.

Themed Pokeballs will become a main stay around here but I'll be reducing their release to 1 wave a month with 4-6 balls

[New File Release] Featherdactyl Ball now up for Grabs!

And here he are at the final stage of release. This is it folks. So here we go!

FeatherDactyl Ball to add to your collection,

You guys have three options on how you want to print this.

OBJ - [Comes colored] For those who want to color their own Ball with a different slicer.

STL - For those who don't necessarily have Multi-color Printing Capabilities.

3MF - Already Colored Files Ready for printing in Bambu Lab. [You can import these into Anycubic's Slicer Next...

[NEW File Drop] Baconadon Ball! GO!!

A bit late today due to being overly busy with other life things but here is the release of the day.

Baconadon Ball to add to your collection,

You guys have three options on how you want to print this.

OBJ - [Comes colored] For those who want to color their own Ball with a different slicer.

STL - For those who don't necessarily have Multi-color Printing Capabilities.

3MF - Already Colored Files Ready for printing in Bambu Lab. [You can import these into Anyc...

There's been a shattering in the grid

Lord Drakkon steps forth......

You guys have three options on how you want to print this.

OBJ - [Comes colored] For those who want to color their own Ball with a different slicer.

STL - For those who don't necessarily have Multi-color Printing Capabilities.

3MF - Already Colored Files Ready for printing in Bambu Lab. [You can import these into Anycubic's Slicer Next as well.

The balls uses a 10mm Cylindrical Hinge to open and close ...

Go Forth....My Ranger Slayer!

It's the GraveZord inside btw

You guys have three options on how you want to print this.

OBJ - [Comes colored] For those who want to color their own Ball with a different slicer.

STL - For those who don't necessarily have Multi-color Printing Capabilities.

3MF - Already Colored Files Ready for printing in Bambu Lab. [You can import these into Anycubic's Slicer Next as well.

The balls uses a 10mm Cylindrical Hinge to open and close the ball. The Hinge is real...

I have a problem 😂

Here are the last few Ranger Themed Balls coming to you to finish out month in Wave 2.

Fighting Spirit Dragonball 🐲
Baconadon 🐷
Featherdactyl 🦤

These were fun to do, a complete deviation from what I usually get done around here and as you guys have already voted, yes I will be doing more from other teams, and mixing it up with my usual stuff.

I hope you g...

Shadow Saber Telescoping Blade Demo

Test Print APPROVED!

Tiger Ball and Tiger Ball Box is now YOURS!

ACTIVATE THE TIGER BALL!!!!

You guys have three options on how you want to print this.

OBJ - [Comes colored] For those who want to color their own Ball with a different slicer.

STL - For those who don't necessarily have Multi-color Printing Capabilities.

3MF - Already Colored Files Ready for printing in Bambu Lab. [You can import these into Anycubic's Slicer Next as well.

The balls uses a 10mm Cylindrical Hinge to open and close the ball. The Hinge is really neat...

Ranger Slayer coming with Wave 2

Starting this week!

Tiger Ball Test Print | Expect a Release Tomorrow along with its Box

Sunday Bonus! Yellow Ranger Bust

The next bust in the MMPR Movie Bust collection is yellow. Everything is self explanatory except you now have the 3MF file for color.

PLEASE NOTE: The silver and gold has been removed in the 3MF files for print time. You have access to the OBJ so if you wish to add those colors manually you can. Also keep in mind if you do add those 2 colors that'll be a total of 5 colors Other than that enjoy!
2025-06-22 17:12:21 +0000 UTC View Post

Ranger Ball Boxes UPDATED

The Ranger Ball Boxes have been updated. The STLs and the 3MF files are on the shared drive.

Changes

• Screenshot 1: The gold on the insignia has been raised 0.2mm. This should help people who want to print the top of the box face down without supports. The updated 3MF files have the top orientated with the insignia facing upwards.

• Screenshot 2: Needed to cut a notch so the top could rotate freely about the axis. Can't beli...

  2025-06-22 02:45:04 +0000 UTC View Post

Updated Ball Boxes will be uploaded Later Today

I have fixed the hinge issue and will modify the file folders later today.

To preserve the emblem these will need to be printed right side up. Mines was printed right-side up, no supports and it come out great! Tweak your settings and you'll be fine.

A Few Things [Please read]
Some of you might've noticed that the Sabertooth and Mastodon bottom portions of the pokeballs were lacking the silver. That is due to the fact that I decided to leave it as white bec...

Anybody here Familiar with/read Radiant Black?

Its from the Kyle Higgins, the guy who wrote the Drakkon Story/ Shattered Grid from BOOM! Studios Power Rangers.

Hinge design issue on pokeball boxes. Hold off on printing them

Working on fixing it now

Gotta keep em a secret...👀

Let's have some fun!

A 2nd wave of Ranger Themed Pokeball is coming later next week.

I've revealed 2 of the 5 balls.

Does anyone have any ideas of what the other 3 will be? Drop it in the comment!

I will not respond to comments. It'll give it away if someone guesses them 🤪

[NEW FILE DROP] | Ranger Ball Display Boxes

Because I'm addicted to presentation lol. You have all the Ranger Themed Pokeballs but no way to display them or gift them. Luckily, here's a fix for that.

These Ranger Display Boxes are catered to each Ranger with their Power Coin Insignia plastered on top decorated with their iconic diamond design on the center and sides. The Box opens where you can place your ball into the groove of the box and display or close it and gift it to someone. The hinge on the back can be secured using th...