Hey everyone,
As promised, the baby flexi version of Syris, the figurine sculpt y'all got earlier this month :). (Named and designed after my webcomic character) I loooove her little feathered wings and am excited to give y'all some variety/choices between the baby dragon keychains!
3MF file included
Print recs:
2-3 walls
10-15% infill
Tested down to 60% size
Use a brim if needed for adhesion
Model link: 2023-12-19 07:16:22 +0000 UTC
View Post
Hey guys!
A lot of you have been asking about how I do the hand painting on my 3D printed models, so here's the first of several I'm going to film for y'all! :) This video specifically talks about dry-brushing.
Here it is on Youtube as well if you want to keep up with videos easier there! <3
https://youtu.be/MITHVnXGUCE
Hopefully y'all find these helpful!
Thanks so much for all your support &...
2023-12-17 21:10:58 +0000 UTC
View Post
Hey everyone!
New headset stand coming y'alls way :) This is a design I use myself all the time but the old design was one of my earlier designs and it's a pain to print in my opinion. It's also one of my only designs that requires supports, which most of y'all know I hate lol. So I redesigned a new headset stand for y'all that DOESN'T require any supports! It is also hollowed out in most of the neck portion, so that makes it a much faster and more economical print for how large of an i...
2023-12-16 22:19:50 +0000 UTC
View Post
Hey everyone,
Thanks so much for the suggestions y'all sent my way of what older models you'd like to see available for free in the upcoming months!
These monthly models will be available on Cults3D or MMF for free for a limited time, to help give back to the supportive community and give y'all a chance to snag an older, paid model of mine that isn't included in the welcome pack each month :)
Grabbing from y'alls suggestions, vote which older, already released model you'd li...
2023-12-15 09:56:56 +0000 UTC
View Post
Hey everyone!
Hopefully y'all aren't tired of me yet xD But I just updated the photos of batch #1 of the baby dog/cat keychains! The file in the Welcome Pack now includes the 3MF file for both keychain hole versions and non-keychain versions of all 8 pets!
I've also been collecting y'alls suggestions for what breeds to do next, and am hoping to get the next batch of these guys out in either January of February! Let me know what breeds in particular you'd like to see if you h...
2023-12-14 09:54:23 +0000 UTC
View Post
Hey guys,
A few of you have been asking me to put some of my basic tutorials I've started doing onto Youtube, so here we go! 🙂 Re-branded my old illustration channel a bit and started uploading some videos there!
Nothing too fancy, but I'll slowly start putting up all of my longer and more educational or helpful videos up here! Including the 3D modeling tutorial series I'm starting which will have its own playlist to grow! 🙂
2023-12-14 03:34:59 +0000 UTC
View Post
Hey everyone,
Time for the baby butterfly dragon keychain! This cutie is super floppy and still fits in the 100% size dragon egg!
I'll be adding a colored 3MF file of this guy later tonight or tomorrow!
Print recs:
*2-4 walls
*10-15% infill
*No supports
*Add brim if needed
Model link: https://www.kekreationsart.com/patreonmod
Refer to the pinned Patreon post here f...
2023-12-13 23:45:38 +0000 UTC
View Post
Hey everyone!
A new version of the Wall Dragon/Frame Dragon has been added thanks to one of the awesome Patreon members! This version "Frame Dragon Multilayer" has the different colors of the dragon set at different layers heights that a single-color printer can manually change to, if you prefer that over the single-layer multicolor method! (Check the hueforge tutorial style video on the Patreon page for how to print those style files)
It's included in the ZIP file for you t...
2023-12-12 04:31:39 +0000 UTC
View Post
Hey guys,
Another quick little tutorial for y'all on how to use the new illustrated file! Hopefully this clears up any confusion and makes it easier for y'all <3 And I'll do an updated post notification on the original post if I have that other file added in case some of y'all prefer that method of color swapping! (What we learned in the last video about hueforge)
Let me know if y'all have any other questions!
As always thank you for all your support! You guys are the bes...
2023-12-11 08:39:29 +0000 UTC
View Post
Hey everyone!
A bit of a different type of file today! A new illustrated, exclusive file with a few different ways to print it! Let me know if y'all would prefer a video tutorial on how to set these up and also let me know if you'd like more designs in this style! :)
1 Single-color silhouette, super simple and easy print.
AMS multicolor file (Bambu 3MF), the easiest multicolor option, super fast and fun print! Includes right and left facing options.
Non-bambu multico...
2023-12-10 22:21:07 +0000 UTC
View Post
Hey everyone,
(Also sorry for spamming y'all today!) Another fun dice/trinket storage item! The dice vial :) It's got a screw on top for extra security so you won't lose any of your items if you throw it into a bag or something! This was a fun one to work on :)
Print recs:
*2-3 walls
*5-15% infill
*Size up and down as desired
*No supports
Model link: https://www.kekreationsart.com/patre...
2023-12-08 22:09:09 +0000 UTC
View Post
Hey everyone!
The fox wine bottle holder won for the Patreon model vote! And with that, as I was brainstorming over ideas of how to do the design, some of the Discord members suggested making the fox a kitsune (multi-tailed fox creature) to help use the tails to support the bottle and design and such.
This was a super fun idea BUT I wanted to poll you guys and see if y'all would like the kitsune design just as much as a regular fox, since y'all voted for 'fox', and I don't want to...
2023-12-08 21:40:06 +0000 UTC
View Post
PLEASE READ THE ENTIRE POST. New model suggestions are ALWAYS welcome and happily accepted! This post is for suggestions of which OLD paid model to bring BACK for FREE each month :)
Hey everyone!
So with the coming new year, starting in January I'm going to start listing one of my older models for free every month on Cults3D and MMF! This limited-time-free model will be public for both Patreons to download commercially or for non-Patreons to download for personal use. These wil...
2023-12-07 23:07:54 +0000 UTC
View Post
Hey everyone,
This month's dragon figurine is a pretty feather-winged dragon! Curled up in a resting pose, this figurine is modeled and named after another one of my webcomic characters :) (Y'all will be getting a baby flexi of her coming later this month too ;).) She was super fun to model and I'm excited to finally get her released!
(Model printed in blue and hand painted with acrylics)
Print recs:
*2-3 walls
*5-15% infill
*No supports
*Feel free to size up or ...
2023-12-06 23:04:12 +0000 UTC
View Post
Hey everyone!
Some people were asking about how to use and print the new illustrated keychains that used Hueforge, so I wanted to do a quick video to hopefully help y'all out!
Let me know if you have any questions!
Thanks for all your support <3
- Kek
2023-12-05 02:18:21 +0000 UTC
View Post
Hey everyone!
Time for this month's dice tower drop, the fox dice tower! :) This baby is a bit smaller than most of my other towers, more of a 'mini dice tower', so a good option for lower price points and a lot faster print :). She's one of my favorite towers so far I think!
Colored 3MF included (The photographed tower was printed in solid red PLA and then hand painted with acrylics)
Print recs:
*2-3 walls
*5-10% infill
*No supports
Model link:...
2023-12-04 21:38:26 +0000 UTC
View Post
Hey everyone!
Here's last month's winner from the Patreon vote, the dragon incense holder! This guy is a lot of fun and I've enjoyed using him in my office to test everything :)
Also reminded that it's the beginning of the month so models from 2 months ago will be rolling over and being removed from the website! So go download anything you may have missed from October :).
Print recs:
*2-3 walls
*5-15% infill
*May need a brim for the horns
*No supports
Model...
2023-12-02 22:16:15 +0000 UTC
View Post
Hey everyone,
Time for this month's general model vote! The dragon incense holder won last month's vote and will be released tomorrow! :)
I'm looking forward to seeing which design y'all choose with this poll and the community suggestions poll! <3
Thanks so much for all your support!
- Kek
2023-12-01 22:09:11 +0000 UTC
View Post
Hey everyone!
Here's the model that won the community suggestions voting poll last month! :) The dragon fire tower lamp. This model was a lot of fun to work on and a bit of a different challenge than a lot of the models I do. Y'all always pick such cool designs!
It was a base that slides into place so it stays put and a flat base so you can put a variety of different lights inside! I used a flickering electric tea light in these pictures and love the effect it had! 3MF file includ...
2023-11-30 23:04:08 +0000 UTC
View Post
Hey everyone!
Time for this month's community suggestions vote! Where y'all get to vote on suggestions and ideas pulled from other Patreon members! The winner of last month was the dragon flame lamp, which will be releasing tomorrow! :)
I'm always so inspired hearing all of your great ideas! Remember you can always comment or DM me ideas to add to my list and they may get voted on next month! :)
Thanks so much for all your support <3
- Kek
2023-11-29 22:20:23 +0000 UTC
View Post
Hey everyone!
It's been a long time since I've done a new dice guardian, but I know y'all and your customers love them! This guy is a bit larger than my other dice guardians, the howling wolf guardian! A great pairing with the howling wolf dice tower :)
I've also included a figurine version of this wolf, without the base/dice holder, for y'all to print and use as you'd like! :) Colored 3MF included
Print recs:
2-3 walls
5-15% infill
Size up and down as desired
No...
2023-11-28 23:13:30 +0000 UTC
View Post
Hey everyone!
Something a bit different this time! Some of you know that before I got into 3D modeling, I was a 2D illustrator for over 10 years. So hearing about Hueforge and seeing it in action seemed like the perfect opportunity to meld my two artistic passions together! So I'm going to be putting out sets of different keychains (or full sized illustrated pieces, if y'all want) of my animal and fantasy illustrations :). I'm super excited to share this part of my creativity with y'all...
2023-11-26 22:12:04 +0000 UTC
View Post
Hey everyone!
New décor item, the dragon book nook! :) A small dragon to crawl around on your books with a storage section to hide goodies in! If y'all are interested in more 'book nooks' like this let me know! I can definitely do more :).
Includes colored 3MF
2 versions of the base box
*1 with a flat overhang on top to allow more space for storage
*1 with a 45 degree angles on both sides if your printer struggles with bridging)
*1 side sliding piece.
Prin...
2023-11-25 03:36:19 +0000 UTC
View Post
Hey everyone!
For those of you who celebrate Thanksgiving, I hope you all had a safe and enjoyable holiday <3 I wanted to let y'all know that today until Nov 30th, ALL of my older models on Cults3D and MMF are on sale with the code "KEKBF2023", taking 35% off all files!
https://cults3d.com/en/users/Kekreations/3d-models
This way if you've been waiting on some of the older mode...
2023-11-24 02:58:30 +0000 UTC
View Post
Hey everyone!
The gyroid spinners have gotten a 2nd version uploaded! The gyroid spinners 2.0 :) Updated the ouroboros and the dragon versions.
The difference between these and the other gyroid spinners is that each ring has 1 axis that it spins on, vs the old spinners could spin in any direction and the tolerance between the pieces held the rings in place. Which makes these a MUCH smoother and faster spin because there's much less friction! But also more limited direction o...
2023-11-23 04:40:37 +0000 UTC
View Post
Hey everyone!
Time for this month's exclusive magnet/keychain set :) The chameleon set!
Print instructions:
- 2-3 walls
- 15-20% infill
- No supports
- Photos here are done with 0.2 layer height, for higher detail you can print at 0.1 layer height* Magnet is made for magnets with 1 inch diameter and about 4.5-5mm thickness. I secured mine in with a small dab of superglue and they're golden! I went with the glue-in magnets vs print inside magnets beca...
2023-11-21 23:48:32 +0000 UTC
View Post
Hey everyone!
I'm soooo excited to finally release this little guy! My new favorite baby dragon, the Eros baby (modeled after my webcomic character, similar to the original large ram horn flexi dragon). These guys are super floppy, durable, posable, and can be printed way smaller than the other baby dragons! Tested down to 60% (the purple baby shown here). He's a fun and satisfying little fidget that's easier to keep on hand than the larger dragons.
Colored 3MF included
Prin...
2023-11-19 22:20:56 +0000 UTC
View Post
Hey everyone!
Back to our regularly scheduled programming around here :). This month's dice tower is a can holder/dice roller combo! I know a ton of you were huge fans of the original can koozie and have been asking for a dice roller can holder! :) This design was super fun to put together and I hope y'all enjoy it!
The mug can also be scaled up or down easily to accommodate different sized cans or bottles! It's currently sized to fit a USA standard 12oz can. Colored 3MF file incl...
2023-11-18 02:31:23 +0000 UTC
View Post
WOW we hit 500 subscribers this week on Patreon!! (Plus 65 as of today on Tribes MMF) This is such a huge milestone for my business and I seriously couldn't be more thankful for every single person who subscribes, buys my files, shares them, reccomends me, ect. Every bit of support means the world to me and y'all are seriously making my dreams come true
The past 9 months since starting this journey has been a whirlwind and I never expected how much of a positive response I'd get. ...
2023-11-15 23:44:04 +0000 UTC
View Post
Hey everyone,
Rolling out with more holiday designs! This month's support-free dragon figurine is a holiday themed one! This reindeer dragon with a Christmas bauble hanging from his tail can be a stand alone figurine OR hang on your tree as an ornament!
Print recs:
*2-3 walls
*5-15% infill
*No supports
*Feel free to size up or down as desired
*Print with a brim to ensure bed adhesion
Model link: 2023-11-15 19:45:15 +0000 UTC
View Post
