Kekreations 3D

Meowl Flexi EARLY ACCESS

Hi everyone!

This baby was the 2nd winning vote from the June Community Vote models, that got just BARELY beat out by the wine bottle holder. And I thought it was such a cute idea I wanted to put it out this month! The 'Meowl', named by the Patron who suggested her, a feathery, fantasy, owl/bird combined with a kitty. I loved working on her!

Print recommendations: 

* 2-4 walls

* 10-20% infill

* Add a brim if you have adhesion issues, particularly around the ...

Red Panda Pen Holder EARLY ACCESS

Hey everyone,

A cute little functional design today! A red panda pen holder :) He's adorable and does well at holding all types of thick or thin pens!

Print recommendations: 

* 2-3 walls

* 10-20% infill

* Add brim if you have adhesion issues

Let me know if y'all like the idea of more pen holders! :)

Find the file in the Google Drive linked for Patrons here ...

Types of Models

Hey everyone!

The Patreon has grown a LOT since the last time I did this type of poll, so I figured it was time to do another! 

As I'm sure y'all know by now I really enjoy doing a very wide variety of models and I try my best to evenly distribute different types of models throughout the month so that y'all get a good spread between décor/function, flexis, keychains, ect. 

But I love to know what types of things y'all prefer most, what sells best for y'all, what y...

Baby Wyvern Keychain EARLY ACCESS

Hey everyone!

Here's the first in a new series of models I'm working on of small little baby keychain creatures :). I'm SUPER excited about these guys and hope y'all love them too! My goal creating these babies were for them to be cute, small, super floppy/flexi, super sturdy, AND be able to be posed in all the same poses that my large animal flexis can! (Sitting, standing, play bow, lying down, and this one added a sploot to the list too). They've also survived being chucked off of a 2...

Fox Dice Guardian EARLY ACCESS

Hey everyone!

I got a new foxy dice guardian for y'all! :) I love making the little dice guardians, they're so cute.

Print recommendations:

* 2-3 walls

* 10-20% infill

* Size up or down as you'd like

Hope y'all like this little baby!

Find the file in the Google Drive linked for Patrons here https://www.patreon.com/posts/3d-model-access-82725512 You'll find t...

Dragon Head Controller Holder EARLY ACCESS

Hey everyone,

New decor/functional piece! Dragon game controller holder. 2 versions, one to sit on a table, and one that can mount on the wall! It uses the same wall mount piece that the dragon coat hangers use. Testers have tried and tested many different controllers like xbox, play station, switch pro controller, ect.

Print recommendations: 

* 2-3 walls

* 10-20% infill

* No supports needed

Hope y'all like this guy! 

Find the file in the Go...

Fox Magnet and Keychain PATREON EXCLUSIVE

Hey everyone,

Time for another Patreon exclusive set! The fox magnet/keychain set :). The fox has one of my favorite head models <3 Hope y'all like this little guy!

Print instructions:

* 2-3 walls

* 15-20% infill

* No supports

* Photos here are done with 0.2 layer height, for higher detail you can print at 0.1 layer height

* Magnet is made for magnets with 1 inch diameter and about 4.5-5mm thickness. I secured mine in with a small dab of superglue ...

Flexi Wolf EARLY ACCESS

Hey everyone,

New release day! Time for the Flexi Wolf! :) This was what won 2nd place in the votes from last month's poll. I've loved working on this guy since wolves are one of my favorite animals.

Print recommendations:

* 2-4 walls
* 10-20% infill
* Add brim if you have adhesion issues
* Prints best at 100% size+, but depending on your printer it may do well down to 75% size as well!

Hope y'all like this guy!

Find the file in the Google Drive lin...

Dragon Shield Hair Pin EARLY ACCESS

Hi everyone,

It's about time for a new accessory item for y'all! This time it's a hair pin! Crossed swords with a dragon head crest on the shield ^.^

If y'all are interested in more hair pin designs, let me know, they're a lot of fun!

Print recommendations: 

* 2-3 walls

* 10-20% infill

* Add brim if needed but should be fine without

* Supports optional under the shield. Most testers had it bridge over perfectly fine but you may prefer to add supp...

Dog Breed Keychains EARLY ACCESS

Hey everyone!

Time for new puppy dog keychains! New breeds to choose from based on y'alls suggestions!

From left to right in the hand photo we have

*Boston Terrier

*English Mastiff

*Pembroke Corgi

*Belgian Malinois

*Pitbull Terrier

*Beagle

Hope you guys enjoy these pups! And let me know if you have other suggestions of breeds to add :)

Print instructions:

* 2-3 walls

* 10-20% infill

* These guys NEED a wide, tight b...

August Model Poll

Hey everyone!

Beginning of the month means the next design poll for y'all to vote on from my ideas! :) 

As always, the poll will be multiple choice, but please pick 1-3 favorites if you absolutely can't decide on 1-- Just don't tick all the boxes because then it doesn't help the poll :). I've attached an image with some very rough sketches to help y'all visualize the ideas to help you vote.

Voting will end next Sunday, July 9th! And for the last community suggestions po...

Twin Dragons Dice Tower EARLY ACCESS

Hey everyone!

Beginning of the month means time for the model that y'all voted on last month from my ideas! This time was the dragon dice tower, which testers have come to call the 'Twin Dragons'.

Print recommendations:

* 2-3 walls

* 5-15% infill

* Size up as high as you'd like, can go as small as 80% and still fit a standard 22mm D20.

* NO supports needed

Find the file in the Google Drive linked for Patrons here 2023-07-01 20:59:15 +0000 UTC View Post

Dragon Wine Bottle Holder EARLY ACCESS

Hey everyone!

Time for the winner of last month's community suggestions vote, the Dragon Wine Bottle Holder! I've been super excited about this one coming out and I hope y'all love it! Y'all have the best ideas for new models and I'm always so stoked to see what wins your vote.

An average wine bottle is about 3.2ish inches in diameter (the bottle I have in here is about 3 so it has some wiggle room) so this it was modeled off of that sizing. Feel free to size up or down as desired...

Owl Keychain and Magnet PATREON EXCLUSIVE

Hey everyone!

These are the firsts of Patreon exclusive models and edits I'll be sending out for y'all! :) All current and future flexi animals (and possibly some of the flexi dragons) will be getting magnet and keychain sets in the upcoming months! Other models like my wall mounts may be getting this modification as well, and some exclusive modifications to full flexis are in the works as well :). 

Print instructions: 

* 2-3 walls

* 15-20% infill

* No ...

July Community Suggestions Design Poll

Hey everyone!

It's that time of the month again, time to vote for y'alls favorite design ideas from YOUR suggestions! Last month the dragon wine bottle holder won, which will be getting released at the end of this month!

Since the community has been growing and y'all have so many great ideas, I can't fit every one in every poll, so I'll be picking some of my favorites each month for y'all to vote from, and probably rotating through ideas that haven't gotten polled yet. If it ends ...

Dragon Castle Dice Tower EARLY ACCESS

I got comments from a LOT of people how I should turn the tower from my desk organizer into a dice tower-- so ask and you shall receive! 

Print instructions: 

* 2-3 walls

* 10-20% infill

* NO supports needed

* It can be sized down to about 80% and still works well with standard 22mm D20s. For mini dice it can go smaller as well.

Find the file in the Google Drive linked for Patrons here 2023-06-22 22:15:57 +0000 UTC View Post

Penguin Keychain + 3MF file EARLY ACCESS

Hey guys!

Time for a simple keychain model, a cute little penguin! He was so fun to design and is so cute! Along with the basic STL I've also included a multi-color 3MF file with this one for those of you with multi-color printers, to print versions like the colored ones I have here!

Are y'all interested in more cute, simple keychain models like this of different animals? Let me know!

Print instructions:

* 2-3 walls

* 10-20% infill

* Add a brim if you have ...

Dragon Switch Dock 2 EARLY ACCESS

Hey everyone!

Been a while since I put out a switch dock, so here's a new one! This was y'alls 2nd choice winner in the model poll last month :). A more full-body dragon to wrap around and hold your Switch :). 

Usual print instructions: 

* 2-3 walls

* 10-20% infill

* NO supports

* Add a brim if you have adhesion issues on some of the smaller parts.

Hope y'all enjoy this guy! :)

Find the file in the Google Drive linked for Patrons here ...

100 Patron Milestone THANK YOU

Hi everyone! 

WOW we've blown past 100 Patreon subscribers and I can hardly believe it! I can't thank y'all enough for your support! Your support, encouragement, feedback, testing, and ideas help me continue to make more and better models every month and it means the world to me.

With reaching this milestone it also means that I can commit some time to make y'all some Patreon exclusive designs and variations every month! I'll be starting off with some magnets and keychains of...

Father's Day Dragon Can Koozie EARLY ACCESS

Inspired by Father's Day coming up, here's a dragon beer/soda can koozie! ^.^ Thanks so much to the members in the Discord for helping me brainstorm ideas for Father's Day gifts/items! Y'all are the best. 

If y'all enjoy the can koozie concept I'll definitely work on more in the future! :)

Print instructions: 

* 2-3 walls (I did 3 to ensure strength in the handle)

* 10-20% infill

* NO supports needed

* Should fit any regular 12oz can, you can scal...

Bird Necklace EARLY ACCESS

Been a while since any new jewelry pieces, so here's finally the bird necklace from the poll a couple of months ago! :)

Like my other necklaces, it comes with a version made up of 4 pieces you can join with jewelry links so that they move and wiggle, and a version as one whole piece for less assembly needed.

Easy print: 

* 2-3 walls

* 15-20% infill

Find the file in the Google Drive linked for Patrons here 2023-06-13 01:19:06 +0000 UTC View Post

Baby Flexi Sea Dragon Keychain EARLY ACCESS

One more release for you guys this week! The baby keychain version that goes with my Sea Dragon release last month :) I love how this little guy turned out and hopefully you like him too!

Print instructions:

* 15-20% infill

* 2-4 walls

* Add a brim if you have adhesion issues but shouldn't need it

* NO supports

Find the file in the Google Drive linked for Patrons here 2023-06-08 06:09:49 +0000 UTC View Post

Dragon Card holder EARLY ACCESS

Hey guys!

For those of you who do in-person events and sales, why not have a little dragon to hold your business cards for you? Had a lot of fun with this little design!

Print instructions:

* 2-3 walls

* 15-20% infill

* Add a brim to ensure good bed adhesion for the wing tips

* NO supports needed

BONUS TIP: It also works as a phone holder for some devices, depending on the case you use (I ended up using it for some of my product photos/videos lol)

Dragon Planter + Box + Dice Guardian EARLY ACCESS

Last month's model vote winner, the dragon planter! And with y'alls awesome feedback on the discord, I made several modifications to the design to give y'all a VARIETY of different uses!

This set is a total of 7 different files:

1. The dragon planter with holes in the bottom for drainage

2. The 'nest'/ water catch for the dragon with drainage holes

3. Dragon planter/box WITHOUT drainage holes, in case you prefer a planter without the drainage or to use as a box/contain...

July Model Vote

Hey everyone! Time for the poll for next months voted model/s!

Last month’s winner, the dragon planter, will be released in a day or two and I’m really excited about it!

I’ve attached numbered rough sketches of this month’s options and allowing y’all multiple choice voting again :). Excited to see what y’all would like to see!

As always, feel free to comment, DM me, or let me know in the Discord if you have any suggestions for the Community Suggestions poll later...

Dog and Cat Bookends EARLY ACCESS

Alright guys, last model set release of May and the winner of y'all's Community Suggestion vote last month! The dog and cat bookend sets :) These two cuties can be paired together or with their mirrored counter part instead, if you prefer JUST cats or dogs ^.^

Same as the dragon bookend set, these come with 2 versions per angle. 

1 with the thin lip on the edge of the bookend which helps ensure the bookend stays in place for heavier he books.

1 without the lip if you wa...

Dragon Castle Desk Organizer EARLY ACCESS

In honor of the end of the school year and graduations (as suggested by my sister that's a teacher), here's a fun, fantasy desk organizer! :) Tall tower works as a great pencil and scissor holder, the cobblestone tray for catching change, jewelry, or other small items you'd like on hand and anything you'd like to keep organized and out of sight can go in the short tower box! :) Lots of different potential uses.

Print instructions:

* 2-3 walls

* 10-15% infill

No suppor...

Dragon Wall Hangers/Bowl EARLY ACCESS

Big wall hanging set coming at y'all! These were a lot of fun to design and one of my functional prints that gets the most daily use in my house.

I gave this set it's own folder in the Google Drive because it has a whopping 11 files:

* Each dragon head has 2 sizes (1 recommended for coats, one recommended if you want to use them for just keys)

* Right and left dragon paws

* Dragon bowl shelf

* 1 small hanging screw hook (recommended for the paws, bowl, and opti...

EDIT Community Suggestions MULTIPLE CHOICE VOTE

If you already voted once, PLEASE RE-VOTE. My apologies! Several of you asked if it can be multiple choice but apparently I can't edit that feature without re-doing the post, but I want to give y'all the best voting ability! <3

Hey guys!

We got a LOT of community suggestions this month and I'm stoked to have y'all getting more involved! Let me know what y'alls favorites are! Since there are more this month, I'll try to get multiple of them done in the next month-2 months, beca...

Dragon Paw Phone Stand Keychain EARLY ACCESS

Another small functional print! I know I'm always trying to find something to prop my phone up with when I'm trying to watch videos or something lol. So why not have a little dragon/beasty paw to hold it up for you? (Holds it up well horizontally and vertically)

Print instructions: 

* 15-20% infill

* 2-3 walls

* Can be sized up or down as desired, current size should work for most phones and cases.

Find the file in the Google Drive linked for Patrons here <...