Greetings guys!
I am happy to present RENDERS of 23+ new models from the "Scarlet Monastery" release. I did my best and hope you will like this release (all pre-supported 32mm scale) +additional emblem (if you want to glue it on tabards).
230401-Interrogator_attack
230402-Interrogator_standing
230403-Bloodmage-Casting
230404-Bloodmage_undead
230405-Pirate-Bandit-Ash
230406-Pirate-Bandit-Ash-standin...
Hey guys!
Let's vote for the May theme, which is Alliance theme month.
For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months, so June will be dedicated to the Horde, and July - to the Dungeon).
Please vote until April 12th on the following topics
(refer to the image for an example).
As always please leave your comments and suggestions,...
2023-04-05 07:37:00 +0000 UTC View Post
Greetings!
Some work-in-progress screenshots of the upcoming Scarlet Monastery release.
Sorry, for now I can show only 3 models as I have just recovered from 5-day cold... so I am off the schedule a little bit, but now I am back on track and working non-stop on this release and you can expect all 12 characters to be done in time.
April release will include 20+ STLs (click to see references):
Hello guys!
This March release "Pandas" is printed on Anycubic Photon Mono 0.05mm layer.
Please leave your comments - on how models were printed on your side, and how were supports.
If you encounter any failure please let me know.
As always happy printing and thank you for your support!
2023-03-23 05:36:35 +0000 UTC View PostHello guys! Finally I am finished with test-printing!
Models are ready for download! All 30 models were successfully test-printed (A bit later I will post printed photos).
"Pandas" Release download link: Click - if you were a patron during January you will automatical...
2023-03-17 04:35:54 +0000 UTC View PostGreetings,
Voting results - "Scarlet Monastery" won by taking 38% of votes!
Thanks to everyone who participated in voting and left their suggestions in the comments below.
The January release will include all 10 bosses from Scarlet Monastery +ghoul, please see the bosses and their descriptions <...
2023-03-10 08:53:55 +0000 UTC View Post
Greetings guys!
I am happy to present RENDERS of 30+ new models from the "Pandas" release. I did my best and hope you will like this release (all pre-supported 32mm scale). + hair swap option for some models and new base
230301-Panda_Female_MonkStaff (Hair swap option)
230302-Panda_Female_Rogue (Hair swap option)
230303-Panda_Female_Shaman
Greetings!
Let's vote for the April theme, which is Dungeon theme month.
For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months, so April will be dedicated to the Dungeon, and May - to the Alliance, June to the Horde).
Please vote until March 10th on the following topics (refer to the image for an example).
Note1:Thank you for the suggestions...
2023-03-04 04:33:10 +0000 UTC View Post
Greetings!
Some work-in-progress screenshots of the upcoming Pandaren release.
March release will include 20+ STLs (click to see references):
1. Starting gear (male/female) at least 6 models
2. w3 Chen Stormstout (at least 2 poses+bust...
Hello guys!
This February release "Night Elves" is printed on Anycubic Photon Mono.
Please leave your comments - on how models were printed on your side, and how were supports.
If you encounter any failure please let me know.
As always happy printing and thank you for your support!
2023-02-16 02:01:36 +0000 UTC View PostHello guys!
Models are ready for download! All 31 models were successfully test-printed (A bit later I will post printed photos).
"Night Elves" Release download link: Click - if you were a patron during January you will automatically receive a download link to Myminif...
2023-02-12 04:41:53 +0000 UTC View PostGreetings!
Voting results - "Pandarens" won by taking 48% of the votes!
Thanks to everyone who participated in March's voting and left their suggestions in the comments below, I see March's release as a great one!
March release will include 20+ STLs (click to see references):
1. Starting gear (male/female) at least 6 models
2. w3 2023-02-11 04:42:01 +0000 UTC
View Post
Greetings guys!
I am happy to present RENDERS of 31 new models from the "Night Elves" release. I did my best and hope you will like this release (all pre-supported 32mm scale).
230201-Female_Sentinel_Druid
230202-Female_Sentinel_Druid-cast
230203-Female_Sentinel
Let's vote for the March theme, which is Horde theme month.
For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months.
Please vote until February 10th on the following topics (refer to the image for an example).
As always please leave your comments and suggestions (or upvote those you agree with), I truly anticipate reading them!
Cheers!<...
2023-02-04 02:05:46 +0000 UTC View Post
Greetings!
Some work in progress for the next month's models.
February release will include 25+ STLs (click to see references):
1. Night elf Iconic Archer armor (male/female) at least 6 models (hunter/druid/rogue) - with and without a cape
2. w3 2023-01-25 11:03:07 +0000 UTC
View Post
Hello guys!
This January release "Molten Core" is printed on Anycubic Photon Mono and Elego Saturn (Fire Elemental boss and Mountain giants).
Please leave your comments - on how models were printed on your side, and how were supports.
Please Note - I just have updated the pre-supported files of 230104-Executus and 230102-Gehennas as both files had a failure with supports on the chin part on another machine so please make sure you re-do...
2023-01-16 02:52:26 +0000 UTC View PostGreetings!
Voting results - "Night Elves" won by taking 50% of the votes!
Thanks to everyone who participated in February's voting and left their suggestions in the comments below, unfortunately, I can not sculpt them all so I had to pick.
February release will include 20+ STLs (click to see references):
2023-01-13 02:34:51 +0000 UTC View PostHello guys!
Models are ready for download! All 16 models are test-printed without any failures (A bit later I will post printed photos).
"Molten Core" Release download link: Closed - if you were a patron during January you will automatically receive a download link to Myminifactory on the 1-3 of February (please check your Patreon email).
If you don't get it please con...
2023-01-11 02:13:57 +0000 UTC View Post
Greetings guys!
I am happy to present RENDERS of 16 new models from the "Molten Core" release. I did my best and hope you will like this release (all pre-supported 32mm scale).
230101-Lucifron
230102-Gehennas
230103-Shazzrah
230104-Executus
230105-Sulfuron
230106-Magmadar
230107-Magmadar Dead
230108-Elemental Boss (Hands separated-can be glued in different positions)
2...
Hey guys!
Let's vote for the February theme, which is Alliance theme month. I added 4 options.
For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months, so December will be dedicated to the Horde, and January - to the Dungeon).
Please vote until January 10th on the following topics (refer to the image for an example).
As always please leave your comments and suggestions 2023-01-04 04:01:17 +0000 UTC View Post
Greetings!
Some work in progress for the next month's models.
Please keep in mind that those are WIP.
Click to see all Molten Core bosses: Molten core +w3 Mountain giant
The release will consist of around 14 big models (on 50-75mm bases) + size variations
I am currently working on poses (please suggest some cool ones).
... 2022-12-22 11:28:48 +0000 UTC View Post
Hello guys,
As some of you have noticed "Taurens Tribe v2" scale is "a little off" - they look too small in comparison to humans - I am really sorry about that.
The mistake here -> Models were scaled as big as possible for a 25mm base, as all our standard models are on 25mm bases - so was the previous "Minotaur Tribe" release (that's why I didn't change anything regarding the scale...).
To fix this, I updated each model in their corresponding fo...
2022-12-15 04:26:04 +0000 UTC View Post
Hello guys!
This December release "Tauren Tribe v2" is printed on Anycubic Photon Mono + black primer and white dry brushing.
Please leave your comments - on how models were printed on your side, and how were supports.
As always happy printing and thank you for your support!
Cheers! :)
2022-12-11 11:58:50 +0000 UTC View PostGreetings,
Voting results - "Molten Core" won by taking 46% of votes!
Thanks to everyone who participated in January's voting and left their suggestions in the comments below.
So, the January release will include all 10 bosses from Molten core, please see the bosses and their descriptions here.
Please comment regarding the January release, your suggestions on poses, etc....
2022-12-10 12:31:37 +0000 UTC View PostHello guys!
Models are ready for download! All 25 models are test-printed on my Anycubic Photon MONO without any failures (A bit later I will post printed photos).
"Taurens Tribe v2" Release download link: Closed - if you were a patron during December you will automatically receive a download link to Myminifactory on the 1-3 of January (please check your Patreon email).
Greetings!
Let's vote for the January theme, which is Dungeon theme month.
For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months, so January will be dedicated to the Dungeon, and February - to the Alliance, March to the Horde).
Please vote until December 10th on the following topics (refer to the image for an example).
Note1:Thank you for th...
2022-12-03 12:51:36 +0000 UTC View Post
Greetings guys!
I am happy to present RENDERS of 25 new models from the "Taurens v2/Minotaur Tribe v2" release. I did my best and hope you will like this release (all pre-supported 32mm scale+1 BUST).
221201-Tauren 2-year My3DPrintForge anniversary model (with 2.0-2.5mm diameter and 1.-1.5mm thick magnet-weapon swap option)
221202-Tauren Leader Bust
221203-Tauren Leader
221204-Tauren...
Greetings!
Some work in progress for the next month's models.
Please keep in mind that those are WIP - each model will have at least 2-3 poses or weapon swap options.
1. Heritage armor (male/female) at least 6 models
2. 2022-11-24 10:06:33 +0000 UTC
View Post
Greetings guys!
Finally, our 12-months loyalty rewards are test-printed and ready!
I decided to make it as a pack, that consists of:
1. Blood Elf guitar player 32/75mm pre-supported
2. Tauren Drummer + Drums and Gong (model is scaled to fit a 50mm base with drums - for best scale please print Tauren 15% bigger) -32mm pre-supported
3. Whole stage - 32mm pre-supported
Models are available ONLY to our loyal pa...
2022-11-22 12:08:35 +0000 UTC View Post
Hello guys!
This November release "Humans v2" printed on Anycubic Photon Mono + black primer and white dry brushing.
Please leave your comments - on how models were printed on your side, and how were supports.
As always happy printing and thank you for your support!
Cheers! :)
P.S. Also please suggest in the comments themes for "dungeon month"(December) voting.
2022-11-15 15:03:49 +0000 UTC View Post