I'm a patron myself of a few different creators and some keep posts to a minimum so you're only alerted when new files are available and others like to post a lot of BTS stuff along with the new files.
I'm curious what you guys would like to see
2022-09-09 15:38:54 +0000 UTC View Post
I'm very excited for these files as it'll be the next life sized project to go with Master Chief! I want to make some additional separations for the life sized files but these 1:6 scale files should fit perfectly on most resin printers.
2 poses are added with both including full body sculpts (with and without platform now) and separated versions.
I'm thinking pose 1 will be the life sized version and I can't wait to show you guys how they'll look side-by-side
2022-09-06 15:00:38 +0000 UTC View Post
This is one I've teased for a while in the Discord server and has taken a few iterations of test prints to get right but I'm very happy to show you all the new Medieval Wolffe helmet!
Features:
Swinging Face Plate
Cracked & Non-Cracked variations
Visor holder ridge and template
Separation of pieces that interlock with ease
This helmet is going to be another Patreon exclusive for a good while! Right now what I'm thinking is 1 Patreon exclusive Medieval helmet/armor ...
2022-09-01 14:29:42 +0000 UTC View Post
The time has finally come to show you guys the totally remastered Phase 2 Clone Trooper helmet! The entire model has been updated to match new references from Kenobi and Book of Boba Fett while also including some printing enhancements so let's break it down the changes:
Accuracy mods to new Phase 2 sculpt
Pre-cut along seam lines for easier finishing
Includes a version with 6x3mm magnet holes and one without
Includes a version with the tube stripes recessed and one without
...
This was a fun custom to bring to life and was based on art by @Ximiandingshi
It's a fun question of "What if humanity joined the Covenant and a human became the Arbiter?" I think it has some real samurai vibes to it.
The mask removes with the use of 10mm x 3mm magnets and the rear armor pieces all rotate and flex with your head.
Hope you all enjoy!
2022-08-19 14:52:58 +0000 UTC View Post
This one has been one of the most complex builds to date - mostly due to the moving trigger! There's a lot more features to include so lets go:
It uses a 5mm wide x 25mm long spring to mimic the trigger action (Assembly video tomorrow).
The interior has been hollowed to allow an Arduino Nano insert for electronics, sounds, and lights to be added.
The top chamber easily removes with 10mm x 3mm magnets for access to electronics.
The side grip panels are...
2022-08-16 15:31:39 +0000 UTC View Post
This has been requested time and time again - mostly by a single individual ;) - but I'm very happy to show you guys the Realistic Captain Rex armor files!
It is based of the Hot Toys sculpt and includes everything you'll need for the entire kit. All the unique armor pieces that have been reworked are uploaded in STL format while the typical Clone Armor pieces (i.e. thighs, forearms, biceps) are included in the "Full Set" zip file.
The jetpack connects via 4 hooks that fit seaml...
2022-08-09 15:00:11 +0000 UTC View Post
Welcome to August everyone! I wanted to start off with a bang so here's something I'm very excited to show you: the Medieval Captain Rex Armor!
This will be the first Patreon exclusive file set and will not be available in the shop for the time being. You'll find both the helmet and armor set as part of the "August" rewards (link in Patron Only post)
Many more Medieval "Bartok" helmets and armor sets are on the way!
Enjoy!!
2022-08-01 15:43:35 +0000 UTC View Post
Another helmet I've been dying to make for a long time - Gar Saxon's!
The helmet has a lot of separation that make it easy to print. I've even included pre-oriented options to the separated pieces to hopefully save you guys some time slicing. The buttons on the side are separated and include holes so you can add lights underneath.
It also features the visor ridge and template system!
This will likely be the last addition to the July Specialist rewards. Thank you guys ...
Some file optimizations have been made to the Master Chief pose 4 for life sized printing! You'll find this version has been split even further and already scaled to the correct size. This should help a great deal if anyone else wants to complete their own Chief, I definitely wish I would've made these changes before I started on mine.
Hope you enjoy!
2022-07-22 17:37:15 +0000 UTC View Post
Who else got super excited at this part of Kenobi? Sadly I thought we'd see more dual wielding Vader but I couldn't help but want a figurine to commemorate the scene. Something new as well is a "Damaged" version of the helmet! Might have to go back to the previous figures and add this head as an alternate what say you guys?
2022-07-19 18:19:40 +0000 UTC View Post
Hey everybody! This is a bit different from my typical selection but someone reached out to me about making this as a custom and I couldn't say no. I used to play Destiny all hours of the day and loved the lore about it. I don't have as much time to play anymore sadly but still loved the look of this helmet.
The helmet features lots of separation and uses 8x3mm magnets to snap the face plates in place. They can be easily removed since you can't really see through the helmet with them on...
2022-07-18 16:58:10 +0000 UTC View Post
This is one I've wanted to do for so long. Up until now I've had a partnership with GrizzlyMountainDesigns to sell his file but that meant I couldn't offer it to you my Patreon members. His file was amazing but this is my own take on it.
It features the claw-style moveable rangefinder (same as my Boba Fett) and some rear vent details I saw at the Mandalorian Experience at Celebration!
2022-07-11 16:06:16 +0000 UTC View Post
I'm back from vacation feeling re-energized and ready to make some more awesome stuff so here's the first July release! I've wanted to do a Season 7 Clone Wars Ahsoka ever since the season came out and I'm very happy to show you guys these 4 poses.
Features the hole cut through the lightsaber and hilt to be reinforced with a 2mm diameter rod so prevent them from breaking.
A new Darth Vader pose from Kenobi is also in the works but let me know what figurine you would like to ...
2022-07-05 15:32:45 +0000 UTC View Post
Still have a lot of test printing and optimizing for this piece but I'm excited to show you where it's at now! This helmet was inspired by artwork by @Ximiandingshi where it's a human in Arbiter armor
NGL I'm tempted to make the whole armor set someday!
2022-07-04 17:37:47 +0000 UTC View Post
This helmet was a real challenge, we never got a great look at them in the show and the helmet is so dark its difficult to see details. There was a lot of extra references from merchandise but sometimes it contradicted what was in the show and couldn't be used.
I wish they would have done more than stand around but maybe we'll see more of them in the Jedi: Survivor game.
This was a really fun one to do! I missed the Bartok clone craze back in the day so it feels good to catch up on such an amazing design. This one features a liftable faceplate, visor template and holder, and is pre-sized for up to 24" heads.
There's no model for the helmet plume since it should be hair of some kind but I might look into one you can "print" another time.
Hope you enjoy!
2022-06-24 15:21:36 +0000 UTC View Post
I was a big fan of Destiny back in the day when I had enough free time to grind everything and this was one of my favorite helmets - the Helm of Saint 14! So when someone asked to commission the helmet I was very happy to work with them on it. It's still a work in progress but is nearly ready for test printing.
Just another thing coming soon to keep an eye out for!
Lots of things going on right now so I thought I'd show you guys a quick peek at what's coming soon.
Each helmet goes through several variations before release so I can be sure features work properly and scaling is appropriate. It means some of my files will take longer to make than other's but when the files are released they should be near perfect!
Thank you all for your patience!
2022-06-20 16:06:33 +0000 UTC View Post
With the Bad Batch Season 2 announced I thought I'd fully release the Prototype S1 helmet! I've been sitting on this one for a while because it was finished a little late after Season 1 ended (if you're an annual member you might've seen it already) but now it's ready for a full release.
Hope you enjoy!
2022-06-16 15:13:17 +0000 UTC View Post
Pose 3 of the Kenobi collection has been added to the Specialist June Patreon rewards! This is the last Kenobi pose for now but who knows - maybe there will be an iconic pose in Kenobi I'll have to do!
2022-06-08 20:12:45 +0000 UTC View Post
Couldn't do an Obi-Wan figurine without his classic Soresu form pose! Find these files as part of the June "Specialist" rewards
2022-06-07 14:46:40 +0000 UTC View Post
Pose 1 of the Obi-Wan Kenobi figurine is now available as part of the June Patreon rewards!
Each pose features 2 different costume variations: Jedi Master and General Kenobi
Jedi Master being his iconic robes and General Kenobi him being clad in his Clone Wars armor
Each variant features the pre-separated versions and the lightsaber includes a 2mm diameter hole to add a reinforcement rod inside to prevent snapping of the blade.
Hope you enjoy! More poses in the coming ...
2022-06-06 15:41:17 +0000 UTC View Post
Kai was by far my favorite Spartan from the Halo show and I'm really pleased with how the helmet came out! It splits apart very nicely and has the visor ridge and template that makes everything so simple.
This is the first June reward so I hope you enjoy and are ready for a fun month of new files!
Thank you all for your love and support over these past few years! I've just been floored getting to meet some of you at Celebration and to be able to hear how my work has helped so many people - it's truly unreal.
With that said, I wanted to celebrate with something I've had in the works for a bit - an official Galactic Armory Helmet! It's got a face shield that raises up, visor holders on the faceplate, and a template to help cut them out. This will be a permanent addition t...
2022-05-27 14:22:35 +0000 UTC View Post
Dipping my toe a bit into Age of the Empire stuff with the Patrol Trooper! There's still so many great Empire helmets out there it could take a while to catch up
Helmet features all the niceties: pre-separation with interlocking tabs and the visor holder with cutout template.
2022-05-21 14:14:03 +0000 UTC View Post
One of my favorite helmet designs from Halo Infinite - the Anubis! This one took a while mostly because of test printing. I always want to make sure my files are optimized for printing and want to test them out myself before releasing them to you guys. Got a lot of other helmets in this stage I think you guys will enjoy!
2022-05-19 15:41:20 +0000 UTC View Post
