Aaron Hughes

[We're Hiring!] Join our team and help us make the best cosplay files in the galaxy!

We’re hiring a 3D Modeling Team Lead
Full-time | On-site in New Jersey

At Galactic Armory, we create high-quality, 3D-printable files for cosplay armor and props. From Star Wars to Warhammer, we focus on accuracy, craftsmanship, and fan-favorite designs. Our team is growing, and we’re looking for someone to lead our remote modeling crew.

We’re looking for someone with experience in:
• 3D printing cosplay armor and hard-surface props
• Managing r...

[Preview] Armor sizing program teaser!

I don't think I've shared this publicly yet but we're working on an alternative to Armorsmith! Since A.D. is no longer supported and showing a fair amount of age, we took it upon ourselves to build its spiritual successor for the modern age!

We've got a much more refined avatar creation system in the works with 3 measure points on each major body section. Alternative body types is also something we plan on implementing.

Still a lot more to do on the project but here's some high l...

[New Files!] The Zakuul Knight armor set has been added to the May Specialist rewards!

Here's the big Star Wars project I've been working on these last few weeks! The full set of Old Republic Zakuul Knight armor set including: Remastered helmet, shiny new armor, lightsaber pike with saber core integration, and shield optimized for electronics!

There's a lot to cover here so let's break it down:

Helmet:
- Fully remastered
- Added Bambu Studio Project and GCODE files
- 3 Assembled Versions and Pre-Separated version
- Includes pre-cut parts for smaller prin...

[Specialist Link] Specialist Members! Use this link to access your monthly May rewards

Hello everyone and welcome to May!

As files are released during the month you will find them here. Please note that the May folder has just been created and new releases will be added into that folder as the month progresses.

Use discount code NBJ6ZA3W0NPQ for 30% off older 3D files in the shop: https://galacticarmory.net/collections/3d-files

[Poll] Vote on your favorite release from April!

This will help direct me into making more things you guys enjoy!

Vote for as many as you like!

The MyMiniFactory archive email was just sent out to make sure you can permanently access files that are being archived for annual members, be on the lookout for it!

[New Files!] The Helldivers 2 Hellbomb Backpack has been added to the April Specialist rewards!

It's here! After much testing, improving, and printing; the Hellbomb Backpack is finished and has been added to the April rewards folder!

This thing is absolutely massive but we've got a ton of supporting documentation to help you print and assemble it all.

The files include:
- PDF tutorial for printing and assembly
- Video assembly animation
- Full shopping list with affiliate material links
- The frame is able to open and close around the Hellbomb securely, allowing ...

[New Files and Free Download!] Shoretrooper Miniatures have been added to the April Officer and Specialist rewards!

Time for a beach day, 20 different Shoretrooper 1:48 scale minis have been added to this month's file rewards!

FREE POSE DOWNLOAD: https://makerworld.com/en/models/1368526-shoretrooper-miniature

12 Grunt poses and 8 Squad Leader poses included

Each pose has "With Base" and "Without Base" alternate and every file includes a pre-supported alternate!

A folder full of r...

[New Files!] The Halo 3 Master Chief armor has been added to the April Specialist rewards!

It's good to be back! Thank you all for your patience as we've spent the last few weeks in Japan at Star Wars Celebration. We're definitely inspired by some new Star Wars stuff and it was good to have a little break, but now - back to the action!

Releasing today is the much anticipated Halo 3 Mark 6 Master Chief armor to accompany the helmet from last month! The helmet has been moved to the April rewards as well so it gets to stick around an extra month.

The armor files come pre-s...

[New Files!] Macrobinocular files have been added to the April Specialist rewards!

Hello all, it's late night here in Japan but I wanted to get you guys a release in time for Star Wars Celebration!

There's nothing quite like some of the classic Star Wars props and this is definitely one of them! It's a pretty simple version, split into 4 main parts with a couple variants but it should make a great one-day print and build.

Hope you all enjoy! Thank you for your patience if you were waiting for me to respond to messages. I'll be able to keep up with it better now ...

[New Files!] The Halo 3 Marine helmet has been added to the April Specialist rewards!

This one's been on my to do list for a while! With our release of the H3 Master Chief helmet (and the armor in-progress) I also wanted to do the classic marine! It takes inspiration not only from the low-poly game files but also higher detailed concept art. I think it all blended together quite nicely in the end!

The helmet files include:
- Assembled and Casting Version
- Vacuum forming visor buck. We also are selling physical visors here: 2025-04-08 16:42:39 +0000 UTC View Post

[New Files!] The Doom Eternal Slayer Armor has been added to the April Specialist rewards!

Got ANOTHER big release for you guys today! This one's been in the works for quite a while but it should be obvious as to why - the level of details is insane!

Included in the armor set are over 400 individual STL files. That's between all the armor parts, pre-separated parts, and pre-cut parts for smaller printers. I've got everything organized in a nice series of folders so it should be less daunting!

Also included in the release is the helmet files! There weren't any changes to...

[Video] Our Bambu Lab H2D Cosplayer's Review video is here!

After years of waiting, the new Bambu Lab flagship printer has hit the market.

Does it hold up? Is it the new best printer for cosplay? Should you buy it?

These are all questions we answer on this exciting new printer!

Hope you all enjoy!

- Aaron

[It's Back!] The 40k Chaplain helmet has been updated and added to the Specialist Instant Exclusives!

V5 is here as part of an exciting new video dropping tomorrow where we print this helmet in full color in 1 piece! It's also been added to the Instant Exclusives folder - which means you can get it instantly when you join and it doesn't age out of the rewards like normal files!

We're putting the new Bambu H2D printer through its paces and figured there wouldn't be a better test of its build volume than printing this big thing in 1 piece in full color. It was a pretty tight fit but we've...

[New Files!] Halo Infinite Rakshasa Armor and Artaius Helmet have been added to the April Specialist rewards!

Another 2-in-1 for you guys today! I've also got a surprise file to share this afternoon as well.

The Rakshasa armor is probably my favorite new core shown in Halo Infinite. I know a few of us are personally planning on printing this kit for DragonCon in August so I knew I wanted to integrate a lot of customization options, more on that later.

Under-Suit Soft Goods: We've commissioned a costume designer to fabricate the under-suit with the intention of adding...

[New Files!] The Daedric Mando helmet has been added to the April Specialist rewards!

I'm sure you're wondering why you got Daedric Mando before the regular Daedric helmet, let me just say what a great question that is!

This is the last custom Mando helmet for a minute, they are always really fun to make but I might have @GC_ConceptArt (the artist who made this concept - not AI) work on some other pieces for us for a bit, let me know if there's any you'd like to see!

The helmet features:
- Assembled version
- Solid version for miniature scale printing
- Si...

[New Files!] 3 new 40k helmets have been added to the April Specialist rewards!

You guys get 3-for-1 today with a new style of 40k helmets! These ones were based off the Secret Level episode as opposed to the Space Marine 2 game. I'm honestly a big fan of the design differences!

Included in the helmet files are:
- Bambu Studio Project and GCODE files
- Assembled and Solid versions of all 3 variants
- Vacuum forming lens buck - uses the same Grimdark style as the others. Vacformed kits available here: 2025-04-02 15:09:59 +0000 UTC View Post

[Specialist Link] Specialist Members! Use this link to access your monthly April rewards

Hello everyone and welcome to April!

As files are released during the month you will find them here. Please note that the April folder has just been created and new releases will be added into that folder as the month progresses.

Use discount code M2QSKRBQZW2A for 30% off older 3D files in the shop: https://galacticarmory.net/collections/3d-files

[Poll] Vote on your favorite release from March!

This will help direct me into making more things you guys enjoy!

Vote for as many as you like!

The MyMiniFactory archive email was just sent out to make sure you can permanently access files that are being archived for annual members, be on the lookout for it!

[New Files!] The Helldiver Controller Holder has been added to the March Specialist rewards!

Take your allotted 2.5 second break from dispensing Democracy with this Helldiver controller holder!

The figure stands at 226mm tall and includes a lot of different features:
- 2 versions of the base model: 1 with cape and 1 without
- 3MF file with full color data for multicolor printing (for both cape variants)
- Model optimized for minimal supports
- Made to support PS and Xbox controllers
- GCODE file includes a pause in the base to add weight inside the infill (such ...

[Announcement] We collaborated with Trench Crusade! First batch of Cosplay files out now!

Video Announcement: https://youtube.com/shorts/oxWObTnJfDo

In our spare time a bunch of us at GA have been been enjoying painting minis from a new tabletop wargame called Trench Crusade.

TC as a setting is basically "What if hell opened up on Earth in the 1100's and we've been fighting ever since up to 1914". It's got a really interesting aesthetic of the forces of Heaven vs. Hell set in a WW1 style.<...

[New Files!] Titus Figurines and Bust have been added to the March Specialist rewards!

Got another 40k release for you guys this month, it's the last from the "In-Progress" projects so it's all brand new things from hereon out!

It includes 3 different 1:6 scale poses and bust, a Titus head variant is included for everything as well if you're looking for a painting challenge! Each pose includes the usual assembled versions with and without the platform. The body is split up and keyed as well for easy printing and assembly. Even at 1:6 scale it's a massive statue so don't ...

[New Files!] 6 Doom Dark Ages Figurines/Busts have been added to the March Specialist rewards!

Our excitement continues to grow as this game gets closer to release so I figured we'd put those armor files we made to work into some 1:6 scale figurines and busts!

Each figurine comes pre-separated into 14 interlocking and keyed parts. An assembled version both with and without the base are also included.

Each figurine also includes 2 versions of the mace chain: Flexible and Static. The flexible version has the links separated so that when it's printed it remains flexible and ca...

[New Files!] The Mark 6 "Beaky" has been added to the March Specialist rewards!

This one's been highly requested so it brings me great pleasure to announce this one! Like all the past 40k stuff, this one is a Patreon exclusive! Meaning it will be available in the monthly Specialist rewards during March and April, after that it gets archived for annual Specialist members only!

The helmet features:
- Bambu Studio Project and GCODE files
- Assembled and Solid Versions
- Sizing slice at head opening to help scale (Default scale can fit up to 24" circumference ...

[New Files!] The Crysis helmet has been added to the March Specialist rewards!

"Nice printer, but can it run Crysis?"

It's always super exciting to break into a new fandom and I'm really pleased with how this helmet came together! I played the 3rd Crysis game back in the day but always loved the aesthetics of the armor and weaponry. Here's hoping they bring it back someday!

The helmet features:
- Assembled, Casting, and Solid Versions
- Bambu Studio Project and GCODE files to get started printing sooner!
- A sizing slice at head opening to help sca...

[New Files and Free Download!] The Halo Elite miniatures have been added to the March Miniature Releases!

16 different poses of some of the most epic and dynamic Elites have been added to the March Specialist and Officer rewards!

FREE POSE HERE: https://makerworld.com/en/models/1199064-elite-miniature

Each of the 16 poses includes a version assembled with the base and one without the base connected.

Every part also includes a pre-supported alternate to get started resin printing qui...

[New Files!] The Halo 3 Mark 6 Master Chief helmet has been added to the March Specialist rewards!

One of the most iconic helmets of all time has returned to the Specialist rewards with a new (old) look! The Mark 6 Master Chief helmet as originally seen in Halo 3 is here. MK 6 vacuum formed visors have also been added to the shop if you're wanting to complete this build: https://galacticarmory.net/products/master-chief-visor?variant=53219246768419

I put a lot of desig...

[New Files!] The Helldivers 2 Ultimatum has been added to the March Specialist rewards!

One of the silliest (and personal favorite) sidearms in Helldivers has arrived!

This prop replica features:
- Assembled version for reference
- Pre-separated into 16 easy-to-assemble parts
- Rocket with a 1/2" diameter hole cut for a reinforcement dowel
- Picatinny accurate rail system for optional mounts
- Bambu Studio Project and GCODE files to get started printing faster!
- Pre-cut parts for smaller printers

This has been a really fun one for us to print out a...

[New Files!] Four 1:6 scale Death Trooper Figurines have been added to the March Specialist rewards!

We're going to be hitting March hard so I want to keep up the awesome releases with some kickass figurines!

These incredibly detailed 1:6 scale figurines are perfect shelf decoration and are a great addition to any Death Trooper fans collection.

Each pose comes pre-separated into smaller, easier to print, parts. The parts are all keyed and interlock together for easy assembly. Due to the high level of detail it's recommended to print the body parts in resin.

Assembled versi...

[New Files!] The Death Guard Chaos Space Marine helmet has been added to the March Specialist rewards!

The last helmet (for now) in the Chaos line is here! There's 1 more file set that was partially released earlier to get through - then we're on to new 40k stuff (like the beaky)!

The helmet includes:
- Assembled and Solid Version
- Bambu Studio Project and GCODE files
- Printable visor cutout template
- Sizing slice at head opening (by default it's a very generous head opening)
- Pre-Separated into 12 parts including keyed and cut back piece
- Pre-cut for smaller print...

[Specialist Link] Specialist Members! Use this link to access your monthly March rewards

Hello everyone and welcome to March!

As files are released during the month you will find them here. Please note that the March folder has just been created and new releases will be added into that folder as the month progresses.

Use discount code 4FH1EE98HBWT for 30% off older 3D files in the shop: https://galacticarmory.net/collections/3d-files