Hey guys,
And here we go, more polished renderings of the Winter Wolves that I released yesterday. If any one of you ends up printing them, make sure to send me some pictures ;)
Happy printing and have a nice weekend!
2020-01-31 16:04:34 +0000 UTC View Post
Hey everyone,
It's the last day of January and that means it's time to finally drop the last models! I'm super grateful for your patience and for all the get well wishes.
Without further ado, meet the Winter Wolf Pack! Three different models, either with or without base, which can be found here: https://www.dropbox.com/sh/a6ps6466dd0ri2q/AABR7eLSwDkTb1N8q...
2020-01-31 02:23:21 +0000 UTC View Post
Hey guys,
Thank you so much for your patience! I was aiming to upload the next model this evening, but I decided against it as I wanted to publish three different variations of the Winter Wolf at the same time: neutral, snarling and howling! Here's a little sneak peek. The models are super close to completion, but I need to tweak the snarling one a tiny bit more, add their bases and make them print-ready, and I simply didn't want to rush that. I will be able to upload all th...
2020-01-30 02:16:14 +0000 UTC View Post
Hey guys,
Sorry for the long radio silence. I've been super ill for the past two weeks (badly inflamed throat and sinuses with painful lungs and a mean cough, fun stuff!) and didn't touch my laptop at all during that time. Recovery started yesterday though and today I'm feeling good enough to start finishing up the next model. Before I got ill, I worked both on an adaptation of my personal wolf model into a Winter Wolf which will have icy crystals in it's fur, and a cockatrice whi...
2020-01-25 15:31:52 +0000 UTC View Post
Hey guys,
Here we go, the first model of the new year! A Deep One Hybrid with some crab and gorilla elements, hence, a "Crilla" Hybrid :)
This was suggested by the first person to become my Patron, David! I hope you like him, and that you can give your players the scare of their lives. I will make a couple of more poses for this guy which I will release over the next few weeks, alongside some brand new models!
Here's the dropbox link: 2020-01-10 00:47:06 +0000 UTC View Post
Hey guys,
I hope you enjoyed the holiday season and had lots of nice food and spent some quality time with family and friends. I also wish you all the best for 2020! My only resolution for this year is to produce a ton of new models and to hone my 3d modelling and printing skills further.
For now, here's a sneak peek of the Deep One crab/gorilla (Crilla?) hybrid that was suggested by one of my Patrons, David. I'm aiming to have him done either by tomorrow evening or on...
2020-01-04 17:23:28 +0000 UTC View Post
Hey guys,
And here he is, the second pose of the Musk Ox Minotaur, the Bull Rush. This pose is definitely a lot more challenging to print, so don't forget to use sufficient supports!
Next up will be a new model, though I might add a third pose of the Minotaur later on, as he kind of grew on me :)
Here's the link: https://www.dropbox.com/s...
2019-12-23 01:33:40 +0000 UTC View Post
Hey everyone,
Here we go, my test print of the Musk Ox Minotaur. I still need to do some additional post-processing before I'll give him a paint job, but I wanted to show him to you guys already. Printed on my Ender 3, layer height 0.1, 0.4 nozzle and FDG profile with tree supports.
I do have to note something important though. I found out that the spear is a little bit on the fragile side. If you aren't too rough with it, it should still work fine, but if you'd like i...
2019-12-20 16:06:50 +0000 UTC View Post
Hey guys,
We're almost two weeks into this Patreon page, and the first couple of prints have showed up in my inbox! Seeing people actually printing and enjoying my models is more rewarding than I imagined and really lifted my spirits (I may or may not have shown off these prints to family and friends).
Therefore, I decided it would be nice for the rest of you to enjoy these prints as well! As soon as I collected a couple of pictures, I will compile them together for the Prin...
2019-12-20 01:08:17 +0000 UTC View Post
Hey guys,
I figured it would be nice to have a pinned post where I can upload all the showcase pictures of the released models for that month. So here you go, I will update this post as I add more models to the collection :)
Have a nice weekend!
Cheers,
Michelle
2019-12-15 14:01:49 +0000 UTC View Post
Hey guys,
Here's the link for the first pose of my Musk Ox Minotaur. It's quite a basic pose to start with, but I've got a more dynamic one in mind which will be coming soon. I'll use the same folder for additional poses, but will notify you once I've got another one up. Tomorrow I will upload a version of him with a base as well, for anyone who prefers a base attached directly to the mod...
2019-12-15 04:16:23 +0000 UTC View Post
Hey guys!
Remember how I said I wanted to keep the next model a secret? I caved, haha. Have a little preview of my Musk Ox Minotaur. Instead of a regular bull, I wanted to keep things in the Arctic theme and chose to use a musk ox for the bull part instead :) If everything goes as planned, he should hit Patreon this week!
I hope you like him,
Cheers,
Michelle
2019-12-10 01:50:16 +0000 UTC View Post
Hey guys!
As promised, a couple of photos of my Owlbear test print I did for my first model. Unfortunately, there is no snow here in the Netherlands, haha. I printed him on my Ender 3 with 0.12 layer height, a 0.4 nozzle and used a modified FDG cura profile. He still needs a little bit of post-processing, but overall I'm thrilled about the outcome!
To my Patrons, I can't wait to see your results, be it in resin, FDM, painted or unpainted, if you get the chance, please show m...
2019-12-08 16:52:46 +0000 UTC View PostHey guys,
First of all, thank you so much for the positive reactions so far. I didn't think people would be so fast to support me with only one model available, but your faith is heartwarming and super motivating. I'm eager to get the next model ready for you and hope you will like the design as much as I do! For now, it will remain a secret what I'm working on, but I'm aiming to release it next week.
However, since I've already gotten more Patrons than I imagined I wo...
2019-12-08 02:32:47 +0000 UTC View Post
Hey guys,
First of all, thank you so much for your support! I'm very excited to start this Patreon journey together with you.
As promised, here is the first official model, the Arctic Owlbear. I've printed this guy successfully in this size (40mm tall) on my Ender 3 with layer height 0.12, a 0.4 mm nozzle and tree supports enabled. I will post pictures of my test print tomorrow.
I hope you'll have fun with him!
Cheers,
Michelle
2019-12-07 03:07:13 +0000 UTC View Post