Finally the promised April reward is here - Raptor Jesus inspired by (a classic one nowdays) Owen training pose from newer Jurassic Park movies.
Who said Raptor Jesus cannot train (or bless) some flock, right? :)
Model is available in 32 and 75 mm scale, pressupported and print tested. The bigger version is also hollowed for resin saving.
Thank you all for your support!
2023-05-30 10:07:31 +0000 UTC View Post
Finally the promised April reward is here - Raptor Jesus inspired by (a classic one nowdays) Owen training pose from newer Jurassic Park movies.
Who said Raptor Jesus cannot train (or bless) some flock, right? :)
Model is available in 32 and 75 mm scale, pressupported and print tested. The bigger version is also hollowed for resin saving.
Thank you all for your support!
2023-05-30 10:05:37 +0000 UTC View PostApril was very busy month for us and we didn't make the model for April in time. Thus we are pausing billing for May 2023 so we can catch up this month.
Thank you all for your understanding.
2023-05-01 09:56:35 +0000 UTC View Post
This time we bring you model from Fate universe, from series Fate ⁄ kaleid liner Prisma☆Illya. One of the main protagonist magical girls: Saphire - Miyu Edelfelt.
Also we updated our renders a bit with color and contrast. We like them much more and hopefully you'll like them too.
As always the model is available in 32 and 75 mm scale, pressupported and print tested.
Thank you all for your support!
This time we bring you model from Fate universe, from series Fate ⁄ kaleid liner Prisma☆Illya. One of the main protagonist magical girls: Saphire - Miyu Edelfelt.
Also we updated our renders a bit with color and contrast. We like them much more and hopefully you'll like them too.
As always the model is available in 32 and 75 mm scale, pressupported and print tested.
Thank you all for your support!
2023-03-31 14:24:22 +0000 UTC View Post
This time we went into the grim dark distant future of the humankind, where there is only a war at the hand. Those who dissapointed the strict orders of the Empire Armada are being sentenced. The lucky ones get capital punishment, for the others there is Penal League prepared. Not many survives there and those who do should be grateful to their superiors!
We proudly present you one of those famous figures - the one and only Colonel Schaeffair of the famous 13th ...
2023-02-08 09:58:01 +0000 UTC View Post
This time we went into the grim dark distant future of the humankind, where there is only a war at the hand. Those who dissapointed the strict orders of the Empire Armada are being sentenced. The lucky ones get capital punishment, for the others there is Penal League prepared. Not many survives there and those who do should be grateful to their superiors!
We proudly present you one of those famous figures - the one and only Colonel Schaeffair of the famous 13th Penal League - also known...
2023-02-08 09:51:36 +0000 UTC View Post
The Christmas time has already passed, but we were obliged to bring you reward for December 2022, so for all Princess Connect fans - Holiday Christina is here! As a special character lot of details had to be added, but it was worth the work. We hope you like it.
As always, the model is available in 32 and 75 mm scale, pressupported and print tested.
Thank you all for your support!
2023-01-13 13:19:15 +0000 UTC View Post
The Christmas time has already passed, but we were obliged to bring you reward for December 2022, so for all Princess Connect fans - Holiday Christina is here! As a special character lot of details had to be added, but it was worth the work. We hope you like it.
As always, the model is available in 32 and 75 mm scale, pressupported and print tested.
Thank you all for your support!
2023-01-13 13:15:00 +0000 UTC View PostAs it often happens, it seems we are bit late with our lastest release for December 2022, so we are pausing billing for January 2023. It was a busy month and we were unable to finish our Christmas Christina model (from Princess Connect franchise). At least it will still be a Winter Holiday thematic even in next year when we release it, so we hope you will all like it during this snowy season! ;)
Thank you all for your understanding, support during this year, and we wish...
2022-12-29 15:57:03 +0000 UTC View Post
We are sorry for another late mothly release, but we didn't forget and here we are!
This time we bring you a model of the Overlord himeslf: Ainz Ooal Gown, also known as Momonga. As always model is available in 32 and 75 mm scale, all pressupported and print tested. 75 mm supported version is hollowed as this massive model would take too much resin to print. Unsupported version is full, the same as 32 mm version.
Thank you a...
2022-11-30 17:14:35 +0000 UTC View Post
We are sorry for another late mothly release, but we didn't forget and here we are!
This time we bring you a model of the Overlord himeslf: Ainz Ooal Gown, also known as Momonga. As always model is available in 32 and 75 mm scale, all pressupported and print tested. 75 mm supported version is hollowed as this massive model would take too much resin to print. Unsupported version is full, the same as 32 mm version.
Thank you a...
2022-11-30 17:09:31 +0000 UTC View PostAs the title says we are pausing billing cycle for November. The reason is an accident recently happened to us, so we won't be able to finish October miniature in time. We are going to release it in November and for that month no one will be charged. We will be back as soon as we can with more news.
Thank you for your understanding.
2022-10-26 07:37:23 +0000 UTC View Post
The late reward for the August is here - Summer Saren from Princess Connect Re:Dive. Rather late than never, but at least we can remember some nice summer days even now with her :)
The model is made in two versions in her bikini with shirt and without shirt. For the easier printing and painting this time we divided back hair as a standalone STL, so you can print it separately and just simply glue it when ready. Of course we have 75mm and 32mm versions a...
2022-10-02 17:41:55 +0000 UTC View Post
The late reward for the August is here - Summer Saren from Princess Connect Re:Dive. Rather late than never, but at least we can remember some nice summer days even now with her :)
The model is made in two versions in her bikini with shirt and without shirt. For the easier printing and painting this time we divided back hair as a standalone STL, so you can print it separately and just simply glue it when ready. Of course we have 75mm and 32mm versions a...
2022-10-02 17:38:52 +0000 UTC View Post
It's been a year already since we started Denko Workshop 3000 Patreon, and it was a crazy one! Sure, there could be more releases during this first year, but there is always something which can take your plans away, good or bad or just life gets better of us, yet we're still here. Moreover, we are not planning to stop, and hopefully we can bring you more cool miniatures in the future! ;)
As for this 1st anniversary we prepared something special, which is FREE for all! 2022-09-27 15:50:03 +0000 UTC View Post
August was a busy month for us here as we were getting married, so there wasn't much time to work on any new models. This is why the billing for September will be paused and we will deliver new model instead of August. So you won't be charged until the start of October. As always, model from previous month will be available until we go out with the new one.
Thank you for your understanding.
2022-08-25 08:44:26 +0000 UTC View Post
The summer is in the full bloom, and we thought some model related to that would be nice. If you are familiar with the game/anime series Princess Connect Re:Dive, we are plannig to bring up some characters from this franchise!
And for the summertime we bring you no one else than Summer Pecorine - one of the main characters - but in the summer version! We hope you like it.
Also if the time will allow us, we would like to sculpt Pecorine standard ve...
2022-07-31 20:08:20 +0000 UTC View Post
The summer is in the full bloom, and we thought some model related to that would be nice. If you are familiar with the game/anime series Princess Connect Re:Dive, we are plannig to bring up some characters from this franchise!
And for the summertime we bring you no one else than Summer Pecorine - one of the main characters - but in the summer version! We hope you like it.
Also if the time will allow us, we would like to sculpt Pecorine standard ve...
2022-07-31 20:05:59 +0000 UTC View Post
Finally, the reward for month May is up - no one else than legendary fighter Kenshiro. As always, the model is in 32mm and 75mm scales, presupported and print tested.
Reward will be available for download until the end of June for Collector and Legend tiers.
Download post:
https://www.patreon.com/posts/67606847
2022-06-10 19:54:51 +0000 UTC View Post
Finally, the reward for month May is up - no one else than legendary fighter Kenshiro. As always, the model is in 32mm and 75mm scales, presupported and print tested.
Reward will be available for download until the end of June for Collector and Legend tiers.
2022-06-10 19:52:56 +0000 UTC View PostIt looks like the life can get in your way all the time, but as always you have to deal with it :) That means we are pausing billing for June, because the model for May is still not completed. During the June patrons won't be charged at all until the start of July. Models from previous month will be still available until we go out with the new one.
Thank you all our supporters for understanding.
2022-05-31 09:49:39 +0000 UTC View Post
We should have a reward for March, but as April is a free month, we are considerng them as one :) During this time we were working on a different project so that we could try something else. This allowed us to get together more model variants, and we are going to share them with you.
If you plan to make some DnD session and display some tortured or crucified victims - this could be just for you! Together with them we are adding a bonus cross to be used for victims. This is not rea...
2022-04-18 14:12:11 +0000 UTC View Post
We should have a reward for March, but as April is a free month, we are considerng them as one :) During this time we were working on a different project so that we could try something else. This allowed us to get together more model variants, and we are going to share them with you.
If you plan to make some DnD session and display some tortured or crucified victims - this could be just for you! Together with them we are adding a bonus cross to be used for victims. This is not rea...
2022-04-18 14:09:39 +0000 UTC View PostWe are still working on model for March, however it takes more time than anticipated. Also we have some ongoing side project, so we decided we are not going to charge patrons for the upcoming month of April. This should give us time to complete the miniature and finish the other project.
Thank you all our supporters for understanding.
2022-03-27 15:20:43 +0000 UTC View Post
This month we have anime character Megumin from Konosuba (Kono Subarashii Sekai ni Shukufuku wo!). The model has been suggested by one of our patrons, so we hope it can please them :)
And we are going with 2 exclusive verisons: with a standard attire (this time withouh cloak - to have model for painting all around accessible), and version in bikinis. Both versions are available for our patrons for download and print. Models are pre-supported and print-tested as always.
Both models...
2022-02-26 14:59:10 +0000 UTC View Post
This month we have anime character Megumin from Konosuba (Kono Subarashii Sekai ni Shukufuku wo!). The model has been suggested by one of our patrons, so we hope it can please them :)
And we are going with 2 exclusive verisons: with a standard attire (this time withouh cloak - to have model for painting all around accessible), and version in bikinis. Both versions are available for our patrons for download and print. Models are pre-supported and print-tested as always.
Both models...
2022-02-26 14:56:55 +0000 UTC View Post
Vivien, the X-mas pin-up girl is here with big present!
It took some time to get all the files corectly cut and make them as 2 separate pieces, but we think it was worth it (besides learning new stuff of course :D). Scaling a sitting miniature was also a challenge to some degree. Nevertheless Vivien is here and we hope you like it.
With this reward finally up, the November Mud Max link is down now.
Until we will have the next reward for you, Vivien will be a...
2022-01-10 14:39:12 +0000 UTC View Post
Vivien, the X-mas pin-up girl is here with big present!
It took some time to get all the files corectly cut and make them as 2 separate pieces, but we think it was worth it (besides learning new stuff of course :D). Scaling a sitting miniature was also a challenge to some degree. Nevertheless Vivien is here and we hope you like it.
With this reward finally up, the November Mud Max link is down now.
Until we will have the next reward for you, Vivi...
2022-01-10 14:34:17 +0000 UTC View PostI hope you all had wonderful holidays and preparing for New Year start!
We were working hard to deliver you our next miniature before the month ends, but unforeseen situation came up and we got much more on our hands to do than anticipated. For this we are very sorry.
The Christmas miniature - pin-up X-mas Girl Vivien is almost ready, but at the moment we are stuck at work with supports and possible cuts due the design. Also we have no access to the printer so we ...
2021-12-29 12:22:07 +0000 UTC View Post