Maple3D

Tag Team Diorama!

There are a bunch of new files out now all revolving around the Mewtwo & Mew Tag Team promo card from the TCG.

You have the main diorama which has been split for easier printing and then you have the pre-supported files for the resin printers as well as the working Lychee file if you wanted to adjust anything for yourselves.

If you don't want to print the big diorama you can also pick from the Mewtwo bust or the Laughing Mew print. Both will need supports but you have the pain...

#418

New model is out now in both the ornamental and basic version. both can be printed without supports and you have a painted 3mf file for those that want the full colour treatment. The model has been split for easier printing and 4 colour printing.

Enjoy!

More Simple Flexi's!

Just like the previously released flexi's these can be printed without supports and take no time at all to get off the printer.

Enjoy!

Sleeping Eevee

New model is out now and it wont need any supports! You also have a fully split version so even if you dont have an AMS you can get a full coloured version of the adorable Eevee fast asleep.

Enjoy!

New TCG Hand Holders

You can now go and grab a handful of new designs for the previosly released TCG Hand Holder. There are 2 Pokemon themed ones and 5 One Piece versions. They will all need an AMS to print the designs.

Enjoy!

#272

Two new models are out now! The Ornamental and Basic versions of Ludicolo are ready for you to run off and print and you wont need supports for either version. I have split the hat from the body so everything comes out nice and clean and you have a painted 3mf file for those that want a full coloured version.

Enjoy!

Lychee Partnership!

Hey everyone!

The people at Lychee have reached out to me and have kindly given me the opportunity to extend an offer to all of you. If you use the code lychee-maple3d you can now get 2 months of the Plus version of their slicer for Free! I have been using the Lychee slicer for all my resin prints for some time now and is my preferred program personally.

Here is the link to download the slicer:

2025-07-17 15:16:33 +0000 UTC View Post

New Flexi's!

I have just released some simple silhouette flexi's that you can print off pretty quickly if you want something to play around with. All of them can be printed without supports and on my Bambu's they take less than an hour to print one.

Enjoy!

Armadillomon!

New file is out now! You may need a few supports on the bottom of the "shell" but other than that you should be good. You also have a painted 3mf file for that want the full colour version but for this one you will need multiple AMS.

Enjoy!

159

New model is out now! No supports needed and a painted 3mf file is ready to go!

Enjoy!

030

New model is out now! No supports needed and a painted 3mf file for those that want the full colour version.

Enjoy!

#702

New model out now! No supports needed and a painted 3mf file ready for those that want to print the full colour version.

Enjoy!

Piggy!

New model is out now and this one wont need any supports. You also have a painted 3mf file for those with an AMS and want the full colour version.

Enjoy!

He's Gone CRAZY!

New model out now that wont need any supports to print! You also have a painted 3mf file for those with an AMS and want to make use of it.

Enjoy!

New model out now!

New model is out now so grab it and get it printed! No supports needed for this one and you have a painted file ready to go for those that have an AMS. Basic and Ornamental as usual.

Enjoy!

New Planters!

Two new planters are out now! Super easy prints to bring some extra life to your garden. No supports needed and both fit a 3.25" pot at 100%

Switch 2 Dock!

The dock that started it all for me is back for the new Switch! Grab it in a one piece version or split or even the already painted 3mf file if you wanted to go full colour. No supports needed for this easy to print accessory. You have access to all the USB inputs on the side and the main cords that run from the back. Go get it!

775

New model out now! I have split this one up so that it's easier for printing in colour so both pieces can be done with 4 colours or less and only one AMS. You have the Basic and Ornamental like usual.

Hanging TCG Card Holder

A super simple print for those into TCGs or card games like UNO! This hooks on to the side of the table with the clips that slide into the back grooves. Once you're done you can pull the clips off the back and slide them into where your cards sit for a nice compact accessory. It holds up to 14 cards comfortably but I'm sure you can get a few more on there if you tried. I have a few custom back plates coming for this as well depending on your preferred game.

Enjoy!

484

New model out now! Supports will be needed but I've done my best to keep it at a minimum. You also have a painted 3mf file for those with the AMS and ant a full colour version!

Enjoy!

389

New model out now! Supports will be needed for this one and if you have an AMS you have a painted 3mf file ready to go.

Angemon Skull

The Angemon Skull is here and it’s bringing some holy power to your print queue. Supports are needed for this one, but the model’s been split for easy color printing and oriented to make the process as smooth as possible. Whether you're into Digimon, cool skull designs, or just want a unique piece for your shelf, this one's definitely worth the print time.

Digi Skull!

The Veemon Skull is out now and ready to print with zero supports needed. This one’s got a clean, stylized design that makes it a fun and easy project for fans of Digimon or anyone into unique skull models. It’s a quick print and a great addition to any collection, whether you're going for cool, creepy, or just something different. You have the solid version for the display stand or you can print the hollow version if that's more your style.

#395

Empoleon is here and ready to bring some royalty to your shelf. This release comes with both a Basic version for a clean, simple print and an Ornamental version with extra flair for a more detailed display. No supports are needed for either, so it’s an easy print all around. And if you want to skip the painting, there’s a fully painted .3mf file ready to go. Perfect for fans of this regal water-type.

Deck Case Update

Just a quick post to let you know that there are now two new bottoms to the Deck Case, a version that now has two rows that can hold Top Loaders if you want to store all your higher end stuff in there and a Basic version that is just empty that you can toss whatever you want in.

Deck Case - Single - V2

Just a quick post to let you know there is a new version of the Deck Case-Single. This one uses two clasps, one on either side, instead of the hinge to give you a more secure hold on to the main box.

There is also the Team Rocket lid already included as well and you have a AMS version and Non AMS version for that.

#139

Omastar is back from the ancient depths and ready for your print bed. This release includes both a Basic version for a straightforward, clean look and an Ornamental version with extra detail for a more dynamic display. No supports are needed for either version, so it’s a smooth print from start to finish. And if you’d rather not paint, there’s a fully painted .3mf file ready to drop right into your slicer. A great pick for fossil fans and collectors alike.

Cubone Shadowbox

The Cubone Shadowbox is here, bringing a bit of TCG nostalgia to your 3D prints. This design is based on the classic Cubone card from the Fossil set and captures that same somber vibe in a layered, display-ready format. The individual pieces slide neatly into the box frame, which does require some supports when printing. It’s a great way to show off your love for the old-school cards with a creative twist.

Deck Case - Single and New Double Lid

Just a quick post to let you know that there is now a single version for the previously released Deck Case that holds just one deck and I have also added in a Team Rocket lid for the original Deck Case. For the Team Rocket lid there is an AMS version and a version for those without an AMS. I would still print the lid face down and just peel off the supports where the "R" would fit into the lid.

Sableye Skull

The Sableye Skull is out now and it's got a few versions to choose from depending on your style. There’s a solid version with the eyes, a solid version without them, and a hollow version with the eyes removed—so whether you're going for spooky, sleek, or something in between, you're covered. Some supports will be needed for printing, but it’s a pretty straightforward build. A cool piece for anyone looking to add a little eerie charm to their collection.