Maple3D

A new desk friend!

Out now over on the website you can grab the files to print a new friend to hold your phone or even your Nintendo Switch! This friendly Rowlet can't get any easier to print and print in full colour with all the pieces broken up so you can just drop each one in it's spot and add a little glue. The whole thing just took a couple hours to get everything printed so it's not a long one either.

Not much else to say about this cute little guy so go grab the files and get printing!

#448

The fan favourite from this month's poll is out now in both the Ornamental and Basic versions! Lucario is ready to go but will need a little support under the arms before you can pull it off the build plate. Aside from the arms you should be good to print everywhere else without supports so I hope you print a bunch!

This wont be the last we see of Lucario so if he is one of your favourites there will be more to come!

Here Fishy Fishy!

The next file for this month is no out and you can go catch it over on the website now! The super easy to print and articulating Seaking is ready to go in both the regular STL or a painted 3mf file for those with the Prusa or Bambu machines.

Enjoy!

JUNE!! Website Updates and New Models!

Good morning, afternoon, or evening depending where you are hanging out today! I hope you all are having a great day so far and looking to spend some time with your printers because you have some new stuff to make.

The permissions to the website are all done so if you have hit the 3, 6, or 9 month landmark then you should now have access to the Archive or either Loyalty packages. If you don't have access but think that you should, just send me a message and I'll get you sorted out.

June Preview

Well now that the poll for the June models is over we have our top four and the ones that will be modelled! The top four that you can also see in the pictures above are, Lucario, Rowlet, Jirachi, and Treecko! As usual you will get these in the Ornamental and Basic versions since you all have your preference.

On top of those I have been busy the last few days getting a couple models ready to go for the start of the month. First up you have the skull of the Dragon Ball Z villain, Cell in ...

June Poll!!

Another month has come to a close and with a total of 19 different models, it was a busy one for sure. I hope you all found something in this months stuff that you were able to enjoy and keep coming back for more.

To give us an idea of what will come next month you can vote on the poll below where the top four in the standings will be the ones that get modelled in both the Ornamental version and Basic version.

You have until May 30 at 5pm EST to get your vote in but don’t wait...

#53

As the month starts to come to a close we have our last of the poll picks for this month and you can go grab Persian from the website now. Both the Ornamental and Basic versions should be able to be printed without supports at 100% but if you like yours big then you may need to add some.

It has been another jam packed month of models and I hope you were able to print as many as you could! Another month is right around the corner so be on the lookout for the next poll to hit soon.

Articulating!

This month's next file is out now and you can go grab it from the website! This support free Articulating Dragonair is a super easy print and even more fun to play around with. If you have a Bambu or Prusa MMU machine you have a pre painted file ready to go as well.

Enjoy!

Cute and Cuddly!

I hope you all are having a great Monday and start to your week. If you are in the mood for something new to print then head on over to the website and grab this adorable Knit Bidoof. You should be able to print this guy without supports and you have a painted file ready to go for the Bambu and Prusa machines.

Enjoy the new model and have a great day!

#255

The next set or Ornamental and Basic models are here and this time around you can go grab the adorable Torchic and add it to your collection! Both versions should be able to be printed without supports but as always, do what you feel works for you and your machines.

There's no need to drag out this post so go grab the files and get printing! Have a great weekend everyone.

Mecha Book Shelf!

Well it's been almost a week since the last file from me so I hope you're itching for something fun! I have been working on this one for a little bit now and I'm pretty stoked with how it came out. You can now head on over to the website and grab a few different versions of Mecha Frieza, the Bookends version, the regular bust, or the "Cut" version post Trunks.

The Bookend version is definitely my favourite and I am already in the process of painting mine. It will need supports on the a...

Sparky Book Nook!

It has been a jam packed week so far for files so let's keep it going with another. Today you can go grab this adorable Pikachu Book Nook, perfect to add a little spark to your book shelf. This one is printed in two parts, is support free, and you have a painted file ready to go for the Bambu and Prusa machines.

Have a great Friday and show off those prints everyone!

Aww Shucks!

Another day closer to the weekend and another file to get you through it! You can head on over to my website and grab the newest file for this month, a support free Knit Shuckle. Right along side the regular stl file you have a painted 3mf file for the Bambu and Prusa machines all ready to go.

Enjoy and have a great day everyone!

Another Skull!

It's Wednesday and what better way to break up the week than a new model to print?! Out now over on the website you can grab the next skull in the popular collection, Charmeleon. Like all the others you can get this in a solid or hollow version. The solid at 100% can be printed without supports but the hollow version will need some added under the top on the inside and possibly in the eye sockets depending how your machines deal with overhangs.

Enjoy the model and have a great day ever...

A little Dark Magic

We're staying on the YuGiOh train for just one more stop before we roll back into some of the usual material you guys are used to and for this one we have a Dark Magician bust! You will need supports for this guy but I think some supports are well worth it for this model.

It was a nice change to do a human character instead of the usual monster type and I hope you guys enjoy it too. You can go grab the file from the website now and I can't wait to see your finished models of this one....

Branching out a little again

Hey, amazing Patreon supporters! Just dropped a new gem on the website: the support-free model of Kuriboh from Yu-Gi-Oh! It comes with a painted 3mf file tailored for Bambu and Prusa 3D printers. Your support makes these creations possible, and I'm excited for you to dive into this latest addition to the collection. Let's bring Kuriboh to life together!

Be Strong!

Happy Sunday everyone! I hope your having a great day today and have an open printer because the next file is out now and ready to go. Continuing the Fallout Bobble collection is the bobble for Strength. This bobble should be able to print with a lot less support than the Charisma bobble. Like before, the head prints separate and is support free and the letters for the base are split too.

As always make sure you post your prints and show off your stuff, I love seeing my digital creatio...

#260

I hope everyone is having a great start to their weekend and you're in the mood to print something new. Out now over on the website you can grab the next set or Ornamental and Basic models for this month, Swampert! This final evolution form will need small supports for the points on the side of the head but other than that you should be good.

Lots more to come this month so don't go too far!

#306

May's first model is now available over on the website and we're starting off with a big boy! Ready to print is Aggron in both the Ornamental and Basic versions. You should be able to print it without supports but as always you know your machine best so do what you feel comfortable with. Not much else to it so go grab the file and start printing!

Archive and Loyalty Packages

Good Morning/Afternoon/Evening wherever you are! Just a quick message to let you all know that I have just finished updating the website permissions for those of you that have hit the 3, 6, or 9 month milestones and now get access to the Archive or the Loyalty Packages.

If you don't have access and believe that you should, just send me a message to let me know and I'll get you all sorted out.

Thank you so much to all that continue to support me and this Patreon. The first files of...

#1005

Our final files for the month are up over on the website and as you can see from the pictures you have Roaring Moon in all it's glory! Both the Ornamental and Basic versions of the model will need some supports under the frills on the side of the head but I think you should be good otherwise. I have split the wings from the body so that they can be printed flat and then glued on to the main body.

It has been one hell of a month for files and I hope you are just as pleased as I am with t...

It's Gonna Be May!

Oh boy this month has been busy! I will be releasing Roaring Moon later today and after that it will be 18 files in total just for April. If you don't yet have access to the Archive, make sure you grab those files before the end of the month.

But enough about April, let's look towards May! I have put the list of potential models below and as usual, the top 4 will get picked to be modelled. You have until April 30 at 5pm to get your vote in so don't wait if you want to have a voice in t...

Bobble Charismatically!

The files are still coming and you have a fun one to print for the weekend! Head on over to the website and grab this Fallout Charisma Bobble Head ready to go in multi colour print or maybe do it in a glow in the dark like its full of radiation!

The body will need some supports under the arms but other than that you should be good to leave it without. The head can be printed without supports and the letters have been split from the base to cut down on filament changes. I would suggest ...

#359

This month's newest file is out now! You can go grab the Ornamental and Basic versions of Absol from the website. You will need small supports for the side horn but other than that you should be able to let it go without. Not much else to it so go grab the files and get those printers running!

Still more to come believe it or not so don't go anywhere.

Wiggly Snake!

The newest file for the month is up over on the website and it's another articulating print! You can go grab this Articulating Arbok file and print it in a few pieces without supports. The head connects to the main body using the included pin and the body snaps on to the main tail piece. There is a painted file available as well so I can't wait to see all the colourful prints of this one.

That's all for now so enjoy the rest of your day and stay tuned for the next one!

#121

Another model is out now and over on the website ready for you to go grab and print! Just like I mentioned yesterday it is the next Ornamental and Basic design and this time it is Starmie. You have a few versions of the model available to you including a version where the front piece is split from the main body to limit the supports that are needed. You will still need some under the points on the back star but it is pretty minimal.

It has been a jam packed month already and there's sti...

Another File Already?!?!

I know, I know I spoil you guys but why wouldn't I spoil the best group around with another awesome model to print out?! Out now over on the website you can go grab this super easy to print Knit Ditto. No supports needed and a painted file ready to go. With just the two colours needed you should be able to get a whole army of these guys in no time.

Don't go too far because the next Ornamental model will be out tomorrow!

Surfs Up!

Well I hope you all are in the mood for something cute and cuddly because I think I have it for you here. You can now go grab the new Knit Lapras from the website and if you have MMU printers there is a painted file available. Those of you with Prusa can now use Bambu painted files as well so there's just the one file unlike the previous releases. You shouldn't need any supports for this one so go nuts and print a bunch!

Still lots to come so sit tight and stick around!

More! More awesome stuff to print!

Today's collection of files was shown off in the preview but is finally available for everyone to grab and print! No supports needed for any of them and painted files available for Prusa and Bambu machines, these Ice Cream Pokemon are ready for the warmer weather. Don't be afraid to get those paints out and get colourful with those sprinkles!

Not much else to it so go grab the files and get printing!

#501

5 files in 4 days isn't a bad start to the month if I do say so myself! Out now for you to go grab off the website are the Ornamental and Basic versions of Oshawott. The Basic version will be able to print without supports no problem but the Ornamental version may need a few here and there to help with some of the extra design elements on the model. Obviously do what you feel works best for your machine and adjust accordingly.

Time for me to get back to it so you all have a great day an...