The ornamental version of Pain is now available to download below, he should print fine on either resin or FDM with organic supports for his wings, tail and his action figure. If you want your very own Herc merchandise to play with, I've also included the Hercules action figure separately below which can be rescaled and printed any size you like.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
IN...
2024-05-26 20:38:18 +0000 UTC
View Post
The standalone version of Panic is now available to download below, he should print fine on either resin or FDM with organic supports needed for pretty much everywhere on this model. If you want your very own Herc merchandise to play with, I've also included the Herculade cup separately below which can be rescaled and printed any size you like.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INF...
2024-05-23 00:28:27 +0000 UTC
View Post
The standalone version of Pain is now available to download below, he should print fine on either resin or FDM with organic supports for his wings, tail and his action figure. If you want your very own Herc merchandise to play with, I've also included the Hercules action figure separately below which can be rescaled and printed any size you like.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
I...
2024-05-23 00:27:50 +0000 UTC
View Post
Pain and Panic are Hades comedic henchmen in Disney's Hercules, neither are especially loyal to Hades, and serve him only because they fear him and he owns their souls. They are a demonic duo capable of morphing into any shape imaginable in order to carry out Hades evil plans.
For the model I'm planning to do a spin on the pose above that will instead highlight Pain's menacing side and Panic's fearful side, which I think better represents them, I really like this...
2024-05-14 16:22:00 +0000 UTC
View Post
Straight from Hells Kitchen the Underworld Cupcake Jar is now available to download below! The cupcake prints in 2 halves which fit together to create a trinket box, perfect for storing small items like gifts, beads or even cake decorating supplies! It prints at 9.5 cm tall which keeps it a consistent size to the other jars in the collection but it can be resized freely if needed. I've redesigned the connecting part on the jar to solve some resizing issues I was having so it should just ...
2024-05-13 18:38:23 +0000 UTC
View Post
It's halfway to Halloween and what better way to mark the occasion than with a villain month! this month we're going to be celebrating the wickedly wonderful with two characters I've been dying to make since the start, Pain & Panic, along with a die-orama base straight from the underworld to go alongside them. As part of a new collection, the Hades Pandora charm is now available below and the next addition of our Villainous cupcakes will be up on the page in a couple of days.
Also t...
2024-05-09 23:42:21 +0000 UTC
View Post
Baymax and Mochi are the latest characters to be joining our Disney Baby's collection, now available below. The model prints at 9cm tall but can be resized freely, and can be printed on either resin or FDM printers.
Any questions or issues, let me know! Find out what's coming to the page throughout May with the monthly intro post out next!
See you in the next post,
Harley
2024-04-29 18:31:46 +0000 UTC
View Post
The patterned version of Baymax is now available to download below. As with the clean version there's a full version available, attached to his docking station, or a standalone version with the files all available to print as separate parts. He prints at 13cm tall but can be freely resized and he should print fine on either resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 2...
2024-04-25 19:12:24 +0000 UTC
View Post
The first version of Baymax is now available to download below. There's a full version available, attached to his docking station, or a standalone version with the files all available to print as separate parts. He prints at 13cm tall but can be freely resized and he should print fine on either resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
GYROID PATTERN...
2024-04-24 01:21:52 +0000 UTC
View Post
Keep your munchies at bay with our delicious new Baymax Smores now available to download below! Included in the download are a Baymax marshmallow pop model, a giant Baymax smore and some mouth-watering marshmallow pots, perfect for holding all your smore making ingredients and other things. They should all print fine on either resin or FDM, as always any questions or issues let me know!
Coming next I'll have a brand new character model for our collection, with the one an...
2024-04-20 18:45:01 +0000 UTC
View Post
The Mad Hatter Vase and Wonderland flowers are now all available to download below. There's lots of different files included in the download so I've compressed all the flowers into a Rar file to make it less confusing. The Mad Hatter Vase, bread-&-butterfly's, Dog and Caterpillar are all available below separate to the Rar file.
It should print fine on resin but organic supports are highly recommended for those printing on FDM due to the finer parts. I've made the stems quite thick ...
2024-04-17 02:09:23 +0000 UTC
View Post
The next addition to our rose collection is the Cheshire Rose now available to download below! He should print fine on either resin or FDM but light organic supports are recommended to make removal a lot easier. My print settings are available on any of our character model posts if needed.
Coming next I have another lovely decoration inspired by Wonderland with the Mad Hatter Vase out shortly!
2024-04-17 02:07:58 +0000 UTC
View Post
The patterned version of our Caterpillar is now available for download below. Due to all the thin fiddley parts I've made a full version as well as a half version with the pipe and smoke letters all printable separately.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
GYROID PATTERN
210 NOZZEL TEMP
55 BED TEMP
60 MM/S
ORGANIC SUPPORTS / EVERYWHER...
2024-04-10 16:31:52 +0000 UTC
View Post
The next wonderfully weird addition to our character collection is now available for download below. Due to all the thin fiddley parts I've made a full version as well as a half version with the pipe and smoke letters all printable separately.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
GYROID PATTERN
210 NOZZEL TEMP
55 BED TEMP
60 MM/S
ORGA...
2024-04-06 23:12:53 +0000 UTC
View Post
Take a bite of our final Easter decoration now available to download below. The egg is printable in 3 parts at 15cm tall and the mini eggs are printable individually at 3cm tall with either a flat or rounded bottom for easy display. All the pieces will print fine on either resin or FDM and can be easily glued in place for assembly, I decided against modelling anything to attach the apple due to it being so small but it can be easily attached using a thin piece of string and some hot glue.
...
2024-04-01 17:40:24 +0000 UTC
View Post
Rabbit is getting ready for the Eastur celebrations in the hundred acre wood in our next model Inspired by Disney's 'Springtime With Roo'. The model prints at 15cm tall in 2 parts with the wheel barrow and Rabbit printed separately for easier printing and painting, the pieces can then be easily attached using a couple of drops of resin or glue on the handles. I've also included a fully assembled stl for those who want to print it in 1 piece along with resin pre-support lys files below. Our Ea...
2024-03-30 02:18:17 +0000 UTC
View Post
This years Easter egg pack has 6 new eggs for you to paint based on Donald, Daisy, Angel, the Dalmatians, the White Rabbit, and Pixar's famous ball, It also includes a decorative egg crate for display once you've finished painting them. Each egg prints in 2 parts at 5cm tall, perfect for hiding mini eggs inside but they can be freely resized to fit any size eggs you choose, the display crate is the same as last years and prints in 2 parts. If you want to download last years egg hunt you can f...
2024-03-28 20:28:00 +0000 UTC
View Post
Starting off the Easter celebrations with a couple of little extra's I decided to repurpose our adorable ducklings to make some lovely matching Easter ornaments. Each model prints at 10cm tall at the top of each egg and prints in one piece for assembly purposes. They should print fine on resin but for FDM I recommend organic supports for easier removal on the inside of the eggs, if needed my print settings can be found on any of the clean or ornamental character model posts.
2024-03-28 17:41:50 +0000 UTC
View Post
Ornamental Star is now available to download below! thanks to Barbara on our discord for the inspiration for this one. There's 2 versions available to chose from, happy star or angry star both are free standing and should print fine on either resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
GYROID PATTERN
220 NOZZEL TEMP
60 BED TEMP
65 MM...
2024-03-23 16:58:44 +0000 UTC
View Post
Star is now available to download below, thanks to Barbara on our discord for the inspiration for this one. There's 2 versions available to chose from, happy star or angry star both are free standing and should print fine on either resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
GYROID PATTERN
220 NOZZEL TEMP
60 BED TEMP
65 MM/S
OR...
2024-03-23 16:57:56 +0000 UTC
View Post
Our Pizza Planet space crane is now available to download! The model is available in STL format and prints in 2 parts with the rocket and aliens printed separately for easy printing and painting, it can then be attached together using resin or glue.
The model is scaled at 160 x 106 x 82 but is re-scaleable to suit your printing needs. It has been test printed and is suitable for printing on either SLA or FDM printers with extra supports required for finer areas such as the alien antenn...
2024-03-22 20:57:11 +0000 UTC
View Post
The next addition to our rose collection is Stitch's one and only boojiboo Angel now available to download below! I printed mine in white PLA which I painted with Valejo squid pink with a top coat of Arteza rose quartz. She's made a lovely addition to our bathroom alongside stitch but these models are suited to bring a vibrant touch to any setting!
Coming later in the week I'll have an awesome Pizza Planet sculpt for you featuring the Toy Story Aliens followed by a couple of lov...
2024-03-12 17:08:01 +0000 UTC
View Post
The WALL-E and EVE diorama is now available to download below. Once again the model has lots of thin and small parts therefore resin would be the recommended print material but with upscaling and careful support placement it wouldn't be impossible for those printing on FDM.
The diorama is sized at 17cm in diameter and prints in 6 parts, including 2 optional parts which can be attached together using resin or superglue. WALL-E and EVE are connected by holding hands and have been se...
2024-03-11 14:33:48 +0000 UTC
View Post
The patterned version of WALL-E is now available to download below. The model has lots of thin and small parts therefore resin would be the recommended print material but with upscaling and careful support placement it wouldn't be impossible for those printing on FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
GYROID PATTERN
220 NOZZEL TEMP
60 B...
2024-03-07 00:00:34 +0000 UTC
View Post
The first version of WALL-E is now available to download below. The model has lots of thin and small parts therefore resin would be the recommended print material but with upscaling and careful support placement it wouldn't be impossible for those printing on FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
GYROID PATTERN
220 NOZZEL TEMP
60...
2024-03-06 16:51:26 +0000 UTC
View Post
WALL- E, which stands for Waste Allocation Load Lifter - Earth-Class, is a waste collector drone created by the Buy n Large corporation to haul the garbage plaguing earth in the distant future. Unexpectedly, his years of loneliness and unending work allowed him to gain a consciousness of his own.
For the model I chose the pose above for the standalone version which I have tweaked slightly for the one holding hands with Eve. As I expected this was a really detailed sculp...
2024-03-06 14:35:24 +0000 UTC
View Post
The ornamental version of eve is now available to download below. like with the previous version she should print fine on resin or FDM with light supports required.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
TREE SUPPORTS
GYROID PATTERN
220 NOZZEL TEMP
60 BED TEMP
65 MM/S
ORGANIC SUPPORTS / TOUCHING BUILD PLATE
OVERHANG 4...
2024-02-27 00:09:48 +0000 UTC
View Post
The first version of eve is now available to download below. She should print fine on resin or FDM with light supports required.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
FDM
LAYER HEIGHT 0.2
INFILL AT 20 PERCENT
TREE SUPPORTS
GYROID PATTERN
220 NOZZEL TEMP
60 BED TEMP
65 MM/S
ORGANIC SUPPORTS / TOUCHING BUILD PLATE
OVERHANG 45
SUPPORT PATTERN LINES<...
2024-02-24 17:54:32 +0000 UTC
View Post
EVE, which stands for Extraterrestrial Vegetation Evaluator, is the secondary character and WALL-E's love interest in Disney's animated feature film WALL-E.
Due to her robotic design there isn't much in the way of pose's so my plan is to have her giggling, because I love that pose, while holding hands with WALL-E, this should also serve to boost her off the floor since she's supposed to hover. The flat bottomed version is already finished and will be out shortly f...
2024-02-24 17:35:21 +0000 UTC
View Post
Next to accompany Donald is our adorable Disney Baby, Daisy. The Disney Baby's are decorated with the traditional Lo-poly carved look, which sets them apart beautifully from our main collection, they're also Patreon exclusives so you won't find them anywhere else online. I'm planning on making a lot more of these this year as I'm almost finished with the rose collection.
I printed Baby Daisy in resin using my standard settings at 8cm tall. To paint her I used a base coat of Valejo...
2024-02-22 17:35:10 +0000 UTC
View Post
