PoisonApplePrints

Is This Bottomless Pit A friend Of Yours?

Next up this month was Pocahontas' loveable pal Meeko as the next character to add to our collection. Considering he's one of the more complex characters he was a pretty straightforward model to sculpt, I really enjoyed making his little arms and tiny hands, and to my surprise the head dress actually turned out to be super easy! it also included a little bit of practice for one of our Halloween models we've got coming out next month, no spoilers.

To paint Meeko I used Valejo Silver with...

Meeko (Ornamental Variant)

The patterned version of Meeko is now available below! once again I printed him at 16cm tall so he's a little taller than Remy, he also has no thin or fine areas so there shouldn't be any problems printing on either Resin or FDM.

RESIN

45 DEGREE ANGLE

DENSITY 75 PERCENT

FDM

LAYER HEIGHT 0.2

INFILL AT 20 PERCENT

TREE SUPPORTS

GYROID PATTERN

220 NOZZEL TEMP

60 BED TEMP

65 MM...

Meeko (Clean Variant)

The first version of Meeko is now available below! I printed him at 16cm tall so he's a little taller than Remy, he also has no thin or fine areas so there shouldn't be any problems printing on either Resin or FDM.

RESIN

45 DEGREE ANGLE

DENSITY 75 PERCENT

FDM

LAYER HEIGHT 0.2

INFILL AT 20 PERCENT

TREE SUPPORTS

GYROID PATTERN

220 NOZZEL TEMP

60 BED TEMP

65 MM/S

SUPPOR...

Meeko Wip

A little sneak peak of ornamental Meeko, I went with a more floral theme this time since the movie is based around nature, I think he's turned out really well and I'm excited to see the print. He's all finished and currently on print so hopefully if all goes well he'll be up on the page in the morning! 

Thanks, 

Harley 

2023-08-29 01:54:31 +0000 UTC View Post

025. Meeko (Intro)

Meeko is Pocahontas' cute and funny raccoon sidekick with a love of food, especially John Smith's biscuits, which he spends half of the movie pursuing. 

For his pose I've decided to model him pulling his iconic tough guy pose from the scene where he is making fun of Kocoum while wearing the Native American head dress. I think this is such a good pose for Meeko as it showcases his mischeivious and funny side and it just looks really cool. I also want to capture his ...

Meeko Rose

Set the table with the latest addition to our rose collection, featuring the hungry raccoon Meeko! He'll make the perfect center piece for a forest themed feast or look right at home nestled in among the rest of the collection.

To print Meeko I used standard settings with tree supports on Prusa slicer, the rose models print fine on either resin or FDM but the supports are a bit of a challenge to remove so I would recommend printing them in resin if possible to save your fingers. I print...

Pizza Planet Hammburger & Mr. Potato Fries

Hamm and Potato Head are infiltrating Pizza Planet in our next delightful delicacy, available to download below! This suspiciously fast food was inspired by Soap Studios Awesome Alien Pizza figure and includes an adorable burger, some grumpy fries and a mega gulp drink with removable lid, perfect for storing all your pens and paint brushes inside! 

The cup prints in 2 parts with a detachable lid, I placed 2 medium drain holes at the bottom in order to prevent resin pooling and suct...

Alice In Wonderland Eat Me Cookies

Grow as big as a house with the deliciously enticing 'Eat Me' cookies and cookie box, available to download below! The cookie box is a replica of the one Alice finds on the floor after first arriving in Wonderland, it prints in 2 parts with a lid and base that can be held together using small pieces of filament inserted into the hinges. Just to note for long term use its advisable to make the box food safe, but it can also be used as a lovely decorative box or even a place to store your cooki...

Anyone Can Cook... But Only The Fearless Can Be Great

Little chef Remy was our first character out this month and I'm glad to say the model came out beautifully! the fur texture picked up nicely and the patterns and details have all really added a lot to the model. His face also turned out really cute so I'm glad I chose to keep his mouth closed in the end, I also decided to leave his whiskers off which would have been way too fine to print and thickening them up just ended up taking away from it.

To paint Remy I mixed Valejo Arctic Blue, ...

Remy (Ornamental Variant)

The patterned version of Remy is now available below! Once again I've included a solid version and a hollowed version to prevent resin pockets in the spoon. I printed him at about 10cm which makes him a little smaller than our Mickey model, he also has no thin or fine areas so he should print fine on either Resin or FDM.

RESIN

45 DEGREE ANGLE

DENSITY 75 PERCENT

RAFT SHAPE SKATE

FDM

LAYER HEIGHT 0.2

Remy (Clean Variant)

The first version of Remy is now available below. I've included a solid version and a hollowed version to prevent resin pockets in the spoon. I printed him at about 10cm which makes him a little smaller than our Mickey model, he also has no thin or fine areas so he should print fine on either Resin or FDM.

RESIN

45 DEGREE ANGLE

DENSITY 75 PERCENT

RAFT SHAPE SKATE

FDM

LAYER HEIGHT 0.2

INFILL AT 20...

Remy Wip

Just a little sneak peak of ornamental Remy so far, I went with super fancy patterns this time because he's a super fancy rat, but I love the way they've turned out so far he almost reminds me of a royal guard from the back. I just have his head to finish now and he should be up on the page in the next few hours!

Thanks

Harley

Version 1 ...

024. Remy (Intro)

Remy is a very talented rat who dreams of becoming a world famous chef in Disney's Ratatouille.

For his pose I'm going to model him holding his wooden spoon and wearing his little chef's hat, sitting like he is in the picture below, I think it'll have a nice combination of cuteness as well as represent what he does quite well. Being one of my favourite characters, I've been quite excited to work on this one for a while and I think he's gonna make an awesome new model fo...

Just One Bite Of The Poison Cupcake

Based on Snow White's Evil Queen, the first of our villainous cupcakes is now available to download below! it prints in 2 halves which connect to make a lovely trinket box, perfect for storing small items such as beads and jewellery or even cake decorating supplies! I printed mine at 8cm tall which makes it a little bigger than an actual cupcake and a good size for storage, it also locks in place with a twist function to prevent things from falling out.

This was such a fun little projec...

Culinary Critters

This month on the page its all about food! and I've got some mouthwatering models for you to sink your teeth into. For starters we'll be adding a couple of culinary critters to the collection, with little chef Remy as our first character out. Then later, from one that loves to cook to one that loves to eat, Pocahontas' adorable raccoon, Meeko will be our next character model.

Also on the menu this month we'll have a poison cupcake jar, Hamm burger and Mr. Potato fries paired with pizza ...

July - Tea Party!

To celebrate Alice's birthday this month I brought lots of Tea themed surprises to the page! Alongside the Cheshire Cat as our first character model, we made an Alice inspired teacup sculpt, a 'This way, That way' mug tree featuring some familiar faces from Tulgey wood, and a lovely set of Alice inspired teacup hair pins.

Then we started off our ongoing Beauty and the Beast tea set by adding Mrs. Potts & Chip as our next character models, alongside some Beauty and the Beast inspired...

We've Got A Lot To Do, Is It One Lump Or Two?

Mrs. Potts was our next character model out this month to accompany Chip. I always find the simpler models to be the hardest so this one was a bit of a challenge proportion wise but I think she turned out pretty nicely in the end.

To paint her I used Valejo Polished Gold for her trim, Arctic Blue for her eyes, Arteza Pearl White for her main body and Space Gray for her details. For her base and lid I used Lilac, Pearl Pink and Glacier Blue.

I already mentioned the Beauty and the B...

Mrs. Potts (Ornamental Variant)

Nice and easy deco this time, Mrs. Potts Ornamental is now available to download below! Once again the test print ran smoothly with a drain hole placed at the bottom to prevent suction issues, I printed her at 13.5 cm tall which makes her about twice the size of Chip. She also has no thin or fine areas so there shouldn't be any issues printing on either resin or FDM.

RESIN

45 DEGREE ANGLE

DENSITY 75 PERCENT

RAFT SHAPE SKATE

...

Mrs. Potts (Clean Version)

Sorry for the delay, my little one loves bringing me home bugs! but Mrs. Potts is now available to download below. The test print ran perfectly with a drain hole placed at the bottom to prevent suction issues, I printed her at 13.5 cm tall which makes her about twice the size of Chip. She also has no thin or fine areas so there shouldn't be any issues printing on either resin or FDM.

RESIN

45 DEGREE ANGLE

DENSITY 75 PERCENT

RAFT SHAPE SKATE<...

023. Mrs. Potts (Intro)

Mrs. Potts is the mother of Chip and head housekeeper at the castle in Beauty and the Beast, she was transformed into an enchanted teapot when the curse was cast on the castle.

Personality wise she's kind and nurturing but she also has a tough no-nonsense demeanor, like in the scene where she scolds Chip for blowing bubbles. Although this would tie in with the Chip model nicely, I'd rather showcase her happy and loving side because I think she's associated more with tha...

Enchanted Canisters

These lovely Beauty and the Beast tea, coffee and sugar canisters are now all ready for you to download below! I printed mine in resin at around 14cm tall, which makes them a really nice size for coffee canisters or small jars. Just to note, resin isnt suitable for the intended usuage (I'm using mine for decoration) but PLA can be made food safe with some allumilite clear coat and a bit of work.

To paint them I used Valejo game colours in squid pink, electric blue and royal purple mixed...

Wanna See Me Do A Trick?

The next character model out this month was the adorable little teacup and real hero of the story, Chip! I think he's turned out really cute and the patterns look nice so I'm quite happy with him overall. I'm really excited to see the rest of the tea set come together over the next few months, I think it'll make a really nice decoration or play set.

To paint him I used Valejo Polished Gold for his trim, Arteza Pearl White for his main body, Glacier Blue for his patterns and Space Gray f...

Chip (Ornamental Variant)

The ornamental version of Chip is now available to download below. Again I printed him at 8cm tall which makes him about half the size of Mickey and a nice size to go with Mrs. Potts when we make her next. He has no thin or fine areas so there shouldn't be any issues with either resin or FDM.

RESIN

45 DEGREE ANGLE

DENSITY 75 PERCENT

RAFT SHAPE SKATE

FDM

LAYER HEIGHT 0.2

INFILL AT 20 PERCENT

Chip (Clean Variant)

Chip is now available to download below. I printed him at 8cm tall which makes him about half the size of Mickey and a nice size to go with Mrs. Potts when we make her next. He has no thin or fine areas so there shouldn't be any issues with either resin or FDM.

RESIN

45 DEGREE ANGLE

DENSITY 75 PERCENT

RAFT SHAPE SKATE

FDM

LAYER HEIGHT 0.2

INFILL AT 20 PERCENT

TREE SUPPORTS

GYROID PATT...

022. Chip (Intro)

The son of Mrs. Potts, Chip is an adorable and charming teacup who befriends Belle and ends up helping her and her father escape the village trap.

For the model I'm going to recreate his iconic bubble blowing pose like in the bottom left. So far I've finished sculpting his body in Fusion and now I just need to add in his face and all of his details in Zbrush and he'll be good to go. I don't really expect this one to take all that long so no progress post this time, but ...

Cursed Coaster Set

Embrace the darker side of fairy tales with the Cursed Coaster set, now available to download below! Each coaster is based on one of Disney's infamous cursed objects and includes Aurora's spinning wheel, Beauty and the Beast's enchanted rose, Ursula's sea shell necklace and of course Snow White's Poison Apple.

Each coaster in the collection blends together the darkness of Disney villainy with a beautifully enchanting stained glass design and is sure to add a touch of elegance and myster...

Alice in Wonderland Teacup Bobby Pins

I found these Disney collectors pins a few weeks ago and I really loved the designs, so as an added little extra for our Tea themed month I've made some lovely 3d printable bobby pins. Print time is about 2 hours, I made the tea cups in Resin and the pins themselves in gold PLA, all the pieces are printable separately so they're really straightforward to make and can be used for a variety of different accessories, clips, jewellery or just for decoration. 

2023-07-27 02:07:48 +0000 UTC View Post

Tulgey Wood Creatures

Don't step on the mome raths in our Tulgey Wood diorama, now available below! 

The model includes a bunch of familiar creatures from Tulgey Wood including the pencil birds, hammer birds, baby and mama horn ducks and the mome raths. I've made about 4 different versions of each creature for a variety of poses, all are free standing and can be upscaled and printed separately as extra little character models if wanted.

See you in the next post, 2023-07-24 22:00:00 +0000 UTC View Post