July Theme Poll Vote
bellanacht posts
April 2023 Rewards | Imani Figure & Bust
In this pack, you will receive:
- Imani Figure
- Imani Base
- Imani Bust with Separate Pedestal
- Pre Supports TBA
Commercial licenses are exclusive to Patreon/Tribe merchant subscribers for each month's release.
Please c...
2023-05-02 10:26:57 +0000 UTC View PostElegant Nude 1 - WIP
Hey all! Here's a WIP for the first character in this month's patreon release.
Just note that her right arm isn't posed yet, and she will have long locs coming from her wrapped bun.
I haven't named her yet, so if you have any ideas, drop them in the comments ❤️
2023-04-26 13:25:25 +0000 UTC View PostPre Supports for the Devil Tea party are done!
I'm so sorry for the long wait on these pre-supports. I really gave Tiki a run for his money with this set, and he got slammed with long shifts for the past 6 weeks or so.
The pre-supported files for this set are now in the Gumroad and the MMF packs. There are Chitu files, STL files, and hollow files for the whole pack.
Orc Lasses Pre-Supports Added
The pre-supports for these two ladies have been uploaded to both MyMiniFactory and your Gumroad packs!
Big shoutout to Flaming Tiki Mini Studio for the incredible work as always. Give him a follow on Insta if you're not already ❤️🔥
I'm also slowly going through and re-rendering old fig...
2023-04-09 03:03:25 +0000 UTC View Post
March 2023 Rewards Sent Out
Miss Sherry Laine Leopold and Lori Anne Vanetten have been sent out to everyone via Gumroad and MyMiniFactory!
I included the plinths as well for good measure.
Pre-supports will follow. Mr. SupportGuy is finishing off the figures from last month - both hollow and unhollow. He had work delays but is almost done and can jump on these two ladies.
2023-04-02 09:04:25 +0000 UTC
View Post
March 2023 Rewards
As soon as I'm up in the morning (NZT) and shovel a bunch of coffee into my face, I'll pack these ladies up and send them out to everyone via Patreon messages and MyMiniFactory!
Sherry Laine Leopold (left) and Lori Anne Vanetten (right)
Lori's hair nearly did me in. 🔥
2023-04-01 13:27:03 +0000 UTC View PostSherry Laine Leopold - Figure
Here's Sherry Laine! Completed and ready to export. I'll get Miss Lori Anne Vanetten posted up in the next few hours.
2023-03-31 11:55:55 +0000 UTC View PostSherry Laine Leopold - WIP
Here's the WIP of the first orc lady - her shirt is still very much blocked out and in progress. The second character is named Loretta Anne Vanetten and I'll get her posted up next - her jackets are so blocked out it still looks too messy to show before I get the details sculpted in.
Lately it's been very hectic behind the scenes and I've been in hustle mode for the last...
2023-03-29 13:27:13 +0000 UTC View PostFree Pedestals
The Orc ladies are well underway and I'll have their body build WIPs up soon. In the meantime, I put these three plinths together for you all. They are very simple, but if these are useful and you'd like more intricate or different-styled ones, I can do those in future.
These are free for everyone!
- 50W x 100H
- 75W x 100H
- 100W x 100H
Obviously, you can resize these as you see fit for your projects. I bezzeled the bottoms to...
2023-03-27 10:35:33 +0000 UTC View Post
A Devilish Tea Party
Ha!
I was able to cheese my programs to get my old render method to work again - it took a few hours to figure it out, but it'll do until I learn to use Blender or Redshift.
There are 13 assets in this pack
- Iliza in the English Breakfast Tea
- Kitty in the Chai Tea (head first because it's so good)
- 1 Teacup Saucer
- 1 Dessert Plate
- 1 Macaroon
- 1 Devlish Tart
- 2 Mini Krullers ... 2023-03-03 04:11:55 +0000 UTC View Post
February Rewards | A Deviant Tea Party
Sorry for the different render, ya'll. I've updated zbrush to 2023, and now my usual render program is no longer supported, so I'll have to go about finding a new way to create turntables and stills.
All of these figures have been sent off for pre-supports, and I'll be sending the non-supported figures out to everyone in the morning NZTime with some new renders to follow shortly after - it's going to take some trial and error to find a new pipeline
P.S. Iliz...
2023-03-02 13:24:09 +0000 UTC View PostBabd Catha Update
Morning all!
The pre-supports for Babd Catha (January release) have been added to your reward packs on both Gumroad and MMF.
The main files have also been updated - there was an error in the chest where the mesh was too thin and was printing with a hole. This has been fixed and re-uploaded.
Don't forget to join the Discord and show your awesome prints of Bella figures and others!
April Theme Poll
February's Theme: Devil Girls in Teacups
March's Theme: Half Orc Ladies in Suits
April Theme VOTE BELOW!
2023-02-03 01:09:29 +0000 UTC View PostBabd Catha, Celtic Goddess of War
Ha! I finished this at 4 AM this morning. My partner tripped a breaker while making dumplings a couple of days ago, which resulted in a corrupt file and having to redo most of the figure from scratch.
-there's never a dull moment around here, and he's not allowed to cook dumplings anymore-
I just sent out the Gumroad redemption for this figure set and sent the files off for their pre-supports!
MMF links will go out momentarily
If you were not a Januar...
2023-02-03 00:22:21 +0000 UTC View PostGoddess Pack Vol. 1, Limited Campaign
https://www.kickstarter.com/projects/bellanacht/bellas-goddess-pack-vol-1
Hey all!
A new Kickstarter is launching in just over an hour for a short 15 day campaign
If you've been on the Patreon for a long time, then you've likely already got all of these goddess figures that have been bundled up for this project. If not, then there's a small window t...
2023-01-21 09:57:10 +0000 UTC View PostHester Pre-Supports Added
Morning all!
To everyone who was subbed in December, the pre-supports for Hester and her little pet have been added to your packs on both Gumroad and MMF.
I've also split the base into two pieces and added it to the pack. The split base is the supported base. If you've got a bigger printer, you can print it in a single piece without issue.
If you missed this release, it's in the shop 2023-01-17 23:17:12 +0000 UTC View Post
Warning: You're about to be spammed
I'm doing a back delivery of all patreon rewards via MMF so you all have two points of download for all of your rewards, so if you've been with me for a while ... or since the beginning, you're about to get spammed with redemption emails over the next few days.
I'll try to spread them out so you're not bombarded all at once but I just wanted to say i'm sorry in advance!
2023-01-07 23:36:52 +0000 UTC View PostMarch's Theme Poll
January Theme: Babd Catha, Celtic Goddess of War
February Theme: Devil Girls in Teacups
March's Theme VOTE BELOW
2023-01-07 23:24:44 +0000 UTC View PostHester & Her Pet | December Release
So the holidays were rough. Drinks were drunk, shots were shot, insanity ensued, and I spent way too long trying to make fishnet tights so get your dry brushes ready.
I'm getting these files exported today - some of them were being a little glitchy but it's just some troubleshooting with the mesh and these STLs should be uploaded in a couple of hours.
The base, figure, and umbrella are all separate figures. Her right hand is posed in a way that you can simply set the u...
2023-01-05 00:35:36 +0000 UTC View PostSanta, Baby | Patron Exclusive
I know Christmas is over, I got caught up with the holiday insanity and these muscles, because I don't sculpt men very often.
The good news is there are two versions of this figure, a Less Naughty version and a Naughty Version, so maybe Santa should sit on your desk all year to keep you in line 😘
Download at the bottom of this post.
Tentacle Pinups are being posted after this so sit tight.
Frau Perchta, The Yule Witch
She's included in the Welcome Pack, but I thought she needed a shoutout because it is the season for witches and demons right? 🎄🎄🎄🎄🎄🎄
Patron Download
2022-12-14 03:08:37 +0000 UTC
View Post
Lady Krampus - Patron Download
Tis' the season for sexy demons to prowl the streets in search of naughty children!
💋 Patron Download 👇🏻
Yule Lovers - Patron Exclusive - Updated Base
EDIT: Supports have been added!!
Hey all!
I released this figure during my first Christmas on Patreon and it's still one of my favourite figures I've made to date, and is still a Patron Exclusive.
I've gone back and put a new base on it, and separated/keyed it for you as well for bigger prints and custom base making if that's your thing.
I've sent it off for pre-supports so I'll update this post when they're done!
Patron Download 👇🏻... 2022-12-13 04:04:08 +0000 UTC View Post
66 Hours Left on Secret Forge's New Campaign! ❤️🔥
My friends at Secret Forge have just finished unlocking all of Saelums magic with only 3 days left on their campaign!
This 120mm Scale model is featured casting Fire, Ice, and Lightning Spells!
Available in SFW, Burlesque, and NSFW Costumes.
Over 24 fully supported models in 32 and 120mm
2022-12-12 22:41:35 +0000 UTC
View Post
The Morrigan Timelapse
I know absolutely nothing about making youtube videos or even recording my screen properly. I think i used the default zbrush settings for this time-lapse that it spit out, but I clonked it together and uploaded it anyway!
2022-12-06 03:23:43 +0000 UTC View PostThe Morrigan - PreSupports Added
Pre supports for The Morrigan have been added to your respective packs on both Gumroad and MMF!
I've also started uploading shorts to Youtube - there are honestly too many platforms to keep up with but I'm trying. I'm also on TikT...
2022-12-06 00:23:53 +0000 UTC View PostMarzanna Bust
Hey all!
This bust has been added to the October pack with pre-supports, but all current patrons can also download this figure right here. 👇🏻👇🏻👇🏻
Patron Download
Marzanna Supported | Marzanna Unsupported
2022-12-06 00:20:25 +0000 UTC View Post