Guys, stay tune for this and let me think about the pivot section after this, once I got good idea and will cater the slot for this part :) Will release the biceps armor this month as well, cheers!!!
2019-08-18 10:29:58 +0000 UTC View Post
Guys, I've done and sent out the Robin's throwing birds models STL to all patrons in this tier.
Hope you all will like the model, again this is 1:1 scale from references provided by Dennis ;) Thanks again! ~~ Happy 3d printing!
2019-08-11 07:09:58 +0000 UTC View Post
So I bought a SHF Mark 50 action figure to get some idea for bicep and moveable parts design for the following months build :)
Pretty good for design inspiration!
Stay tuned!
2019-07-30 02:50:47 +0000 UTC View Post
Had this done a bit near end of month as I was struggled to think about the way to make the fusion cell release lever to get works, but finally here is it :D I made the trigger movable and electronics friendly as well, hope you guys like it, total 21 parts for this model assembly!
Cheers!
2019-07-28 14:56:57 +0000 UTC View Post
Thanks for you guys supports in this tier I have the shoulder belt model completed and a download link has sent to your email! Lets move and do the next bicep armor to have it extending more :D Cheers!
2019-07-09 06:09:46 +0000 UTC View Post
Alright guys, the last piece of Shazam costume model is finally done and download link already sent to all ppl in this tier- Cheers!
2019-07-07 07:08:45 +0000 UTC View Post
So I 3d design this fallout flamer to use with the PVC pipe that we can get in the market,
OD 32mm and OD 22mm PVC with right angle of the 22mm PVC pipe to make the overall more rigid with that :D I've seen the tap knob somewhere in the hardware as well, you guy might go with that as actual material and the paint color is in red by default.
Happy 3d printing!
Hi guys, the Shazam chest emblem design is done and download link has sent to everyone in this tier now! Can't thank you enough for supporting me on Patreon! Cheers~~
Guys, I'm getting excited to this project now! The neck guard is officially done and get the extra extension flap to slip under shoulder armor/ collar! I will be prepping this neck armor and send the share folder to you guys, Chest armor will be next up soon when I back from out town, be ready for that too!!!
Adding more or pieces in and start figuring for more flexibility, I'm open for discuss...
2019-05-26 15:06:02 +0000 UTC View Post
Hey guys, here update with the boots piece design for Shazam costume!
I 3d modeled the sections and pieces separately so make it easy to hook up the boot of your choice & sizes, there is a back seam leaving it open gap cater for easier accessing the back zippers.
Of course the pieces could be mold and cast in rubber piece to fit even better in profile, general thickness in 2.5mm and s...
2019-05-25 12:37:22 +0000 UTC View Post
Okay, here I have the Robin's Boo Stick from DC Titans reference 3d print ready model done for this month as rewards.
Application for the middle rod would be a 1" diameter tube and 175cm long to fit the printed middle section and stick ends, it's full of detail in here ~~
Hope you guys like it.
Made this Star Wars DT-21 Blaster Pistol and cater for sounds/ electronics set up friendly design for this month Patreon rewards for my subscribers. Really thanks for all guys in this tier and they will be receiving this 3d print ready STL download link now . Cheers!
2019-04-23 03:12:42 +0000 UTC View Post
Guys, I hope you all enjoy the movie! My kids and me pretty much enjoy the whole show in cinema! Here is the planned release model for Shazam belt, I have put a recess area to the back of the belt pieces so you can use your own strap make a custom length to this belt.
The lightning plate split as well to install from behind, there is chances you can make some simple LED light up from there! Cheers!
I will be uploading and sending the link next, all patrons in this tier is gett...
Guys, I just switch my 3d modeling package to Fusion 360, still getting myself to suit the new interface and making it work for me :D
Here is the ION BLASTER from SWKOR reference, just some small touching and assembly checking. It should be send to you in 1-2 days ;) Cheers!!!
2019-03-29 18:32:34 +0000 UTC View Post
Say the word ~ Shazam! Started this month for the gauntlet 3d print model is done now and will be sent for early release! Sign up now to get it to complete the costume part files
All patrons in the tinker tier will be receiving this earlier and don't have to wait for end of month~~ stay tuned.
2019-03-22 01:17:26 +0000 UTC View Post
Okay~~ to all my dear patrons
I will create/ sculpt the Shazam costume pieces for this tier, and here is the schedule plan for this project :)
March 2019 Release - Gauntlet 3d print model.
April 2019 Release - Belt 3d print model.
May 2019 Release - Boots 3d print model.
June 2019 release - Chest 3d print model.
July 2019 release - Cape Pin 3d print model.
So in this tier you will be completing the full costume 3d model of the ...
2019-03-17 14:36:07 +0000 UTC View Post
This is a very detailed blade design and I'm drawing each line and offset it by consistent spacing, middle section is done now :D I will be putting the rest of blade parts to complete this model and will have it deliver by end of the month as usual :) Cheers!
Updated-----
Hahaha, I ended up redraw the lines in ai and have 3d model completed in time! I will be sizing it ...
2019-02-26 09:04:03 +0000 UTC View Post
Just done this Mera head piece from Aquaman movie references and it will be for this month Tinker Tiers Rewards. I will prep it and set a default size and putting info to my Patreon page when I release it. Be ready to get the model by end of the month ~~ Cheers!
-----UPDATE-----
Pls check the default size from above reference and it scale it as you wanted to fit ;) Cheers!
2019-02-20 07:41:16 +0000 UTC View Post
Hi guys, as planned the Mark L helmet would be this month rewards!
I can't thank you enough for staying patient with me to make this project goes live, and I will be discussing with Tim OSullivan about adding in motorized face plate design! We will going to put a proper casing and hinges to this helmet for the next upgrade! Can't wait to kick start the project NOW!!!
Thanks to my patron Dennis who providing the reference for middle shaft symbols, I did my best to make a trace to it and this is how the whole trident looks like. The Trident sculpted in Zbrush and is ready to prep for 3d print ready soon and all patrons in this tiers will be receiving the download link to the 3D model, Cheers!
The Trident I set the default length at 72", you might scale from h...
2019-01-25 10:39:57 +0000 UTC View Post
So I had this helmet sculpted and proportional to fit in a person head with tolerance.
The design flow lines itself have some undercut against the face plate to do with electronics opening, I might have it detachable but not cater for rotate to open design for this month rewards.
Then I might also working with Tim again for another revision of face plate electronics designed option in future or next month if you guys like it. Feel free to let me know your thoughts or comments :)
2019-01-24 01:09:44 +0000 UTC
View Post
So here is the SPACE MARINES ARMOR inspired Ring for this month Tinker Tier Rewards, got to have it printed on resin printer and see how detail it goes. But I'm really happy with the design combinations :D
Will be sending this out soon, stay tuned Patrons!
And the ring default diameter I set it to 10mm so easier for you guys to do size scaling by % to 11mm/12mm/13mm and etc :)
...
Okay patrons, now I had the palm design defined from screen reference :)
Let me clean the sculpts and making it a clean/ 3d print ready STL and send you guys a downloadable link soon ;)
Hey guys,
I will set up a digital mannequin for this project to kickstart for suit building, so lets set the overall figure height at 175cm for average then we can do minor scaling in the slicer or mehsmixer when the suit completed easily. Reason is to keep the printable thickness have sufficient support and work best within the scaling range.
Feels happy to find a way out to make an assembly design through this idea, completely reversible for electronics set up. I want to thanks to all my Patrons for supports and be ready to receive the download link of this anytime soon!
2018-12-16 07:29:08 +0000 UTC View Post
Night Wing Mask for Dec 2018 Tinker Tiers Rewards is done now! Scale for this mask between eyes distance at 75mm, you can slight adjust the size to fit yours by %, the printing thickness is still sufficient to support, 3d model embed with surface texture for print as well, hope you guys like it.
I will send out the download link soon once I uploaded to GOOGLE DRIVE
Okay folks, just decide and these looking interest to me for month of goal.
Tinker Tier - Nightwing Mask (Play Art Kai style)
Big Guns Tier - Nightwing Stick (Play Art Kai style)
Full Armor Tier - Iron Man Mark L Repulsor Palm
Let's keep rolling!!!!
I just want to thanks all supporting patrons! A rewards download link has been sent to your email, anyone who don't get it pls let me know again. Cheers and happy 3d printing!
2018-11-28 06:35:40 +0000 UTC View Post
