gamescape3d

November Preview IV: Even Newer Thatch Roofs and DTRPG LInks Emailed

First, I emailed links to the october patreon from Drive Through RPG. This will give everyone a secondary archival way to get files. I did a short test for 30 folks at the start of the month and it seemed okay, this is my first time sending it to 450+ plus people so it is always a little nerve racking, hopefully it went well. 

Second, I have decided to push back a couple small things to December and get this more aggressive thatch out for November, so there will be 2 more thatch ro...

November Preview 3, some done, some wip

Here's some more on the houses. Ended up boosting the thatch texture a lot. The rougher experimental roof texture showed a lot of promise from test printing and we should have something to show for it next month. These houses scale a bit towards the modern reaper 28mm side of the miniature scale. each hut will have 4 roof variations. 2 of those variations will be suitable for previously released buildings. 

November Preview II, All Images WIP

There will be 3 small size shacks, each shack will have a stone and timber/stone chimney options. each will have 3 thatch roofs: Plain, Plain with chimney, and roof weighted with rope and rocks with chimney.  Interiors will have fire places and dirt walls. The plain roof option will fit other buildings released before. I'll probably knock out one more version with an interior chimney to use on o...

1st November Preview, All images WIP

First up new peasant shacks and first thatch roofs. We'll be making a set of thatch roofs that will be on matrix for our other buildings. They will include basic and more elaborate design options. Designing a new stone and a new timber shack (not shown yet)design matrix. These buildings will be dirt floor and are aimed at being your black death era peasant hovels. The first few will match our earlier...

Patch LV1 Bottom no floor

Patch 

For people who downloaded Before 10/5

Hey sorry folks, I recut the lv 1 bottom OpenLOCK bools at the last minute and managed to reverse the bool, basically messed up something I've done a million times. Anyways the openlock connectors were put in for a guild to help glue things together, so not the end of the world and no reason to waste a print. Commercial printers w...

Final October Preview

Putting up some final test images and some previous images for a final overview.

October Content

GOBLIN FORT & RUINS

• 3 Levels
• 15x15 inch footprint
• 6 inches tall to timber wall
• 3 Crow's Nest Options
• Optional Bottom Stairs
• Designed for 8 inch build plate
• Support Free Prints
• 6 Larger Scatter terrain Ruins

Finished test printing optional stairs and crow's nest v...

Preview October IV and New Website Info, WIP Alternate Parts

EDIT9/25 Added some work in progress alternate tree nests and an optional lv 1 stairway booster

Hi Folks, posting some more images f the fort, put a few of these up on facebook yesterday. The tile separation on the top level is from me spray painting too heavy and chemically warping the print. Go look at the print preview on October Preview #2 if you want to see how well the top tiles go together.

Thankyou everyone for your input on file delivery, I will continue to monitor that p...

File Delivery System Options

Please Read Before Answering

Hey folks, I've been exploring integrating Patreon into the website and have also become aware that myminifactory.com now allows 500mb downloads ( a little borderline but I can work with it). I want to get an idea on how people like getting files but I want to add these details below for your consideration.

gamescape3d.com : I have found a cheapish plug-in that allows me to give products directly. So Ideally I may be able get people pr...

October Preview III

I have some more images of scatter ruins for October. I primed the older goblin houses but am still working on priming October's goblin fort for painting. I did finish most touch ups and a second round of test prints on it though.

A patron mentioned linking the website so I'm looking into that and figuring out how to best use that. In the short term, I believe the "log in through patreon" option is now active.

October Preview PartII

In addition to the goblin fort I'm going to put out some larger ruins and complex rubble field scatter, no idea how many, rubble kind of goes on and on, so it will be a wait and see. 

I have some primer ordered so I'll be painting soon. Test printing went well,  I have some spots on the second level to touch up. It is massive but will print up in only 50-60% more time than the tower. Not too bad considering the area it covers. It has openlocks to assist with gluing and alignme...

October Preview and Some Beyond

Fort is on the print bed. I'll try to get some more done, probably some smaller  rubble ruins. There is some expansion stuff for the palisade barracks in the works as well. Not sure on the timeline for that.  The fort is still WIP, have to touch up some overhang areas mostly. Also have a early preview of integrating housing into sea stack for a coastal housing concept. you'll probably see this in December. I'll likely do a bunch of smaller stuff for November so I'm not hitting peopl...

WIP Preview For September

Here are some in progress images of the September Patreon. Test printing has started.  There may be more but I'll have to see how the testing goes.  September will feature the following.

• 3 Grazing Ox (pre-support-optional)
• 6 28mm Goblin (pre-support & base optional)
• Large 4 Story Goblin Tower (All Parts fit inside 200x200mm)
• Tower can clip into swamp trails from "Roads to Adventure" kickstarter.
• Carved out Mushroom House & Stai...
  2020-08-20 20:52:32 +0000 UTC View Post

Some new stuff

 First, we will also be helping sponsor a Greyhawk based podcast on twitch with the Lord Gosumba Channel. This is new territory for me but I think it could be a good match as I feel like the style here owes a lot to that era. There will be digital giveaways on there once per a month as well.  

Over vacation, I started going back into characters a bit. These here are works in progress and will be a small ...

Test Print Preview

Hi folks, just about done with August, wanted to post some test print shots. Level one will be available as one or four parts but will require a 12 inch bed for the single. The second level is a one piece but I will have that as a two part option as well. Everything went well, I went back and pruned some of the weaker plant parts on lv1, works well with just 2 levels also. Roof prints in a couple 4 hour parts @.2 on a z axis, which actually makes it faster than a lot our roof parts despite th...

Back Catalog Full Bundle for New Patrons Full 1st Year

These are links to see for single months and full year groups of Patreon releases. If you forgot your code it you can get it on the starter kit post. 

Individual Month...

Preview for August WIP

The main feature for next month will be a fairly large 3 story goblin swamp clan house. In September we will expand the sky ramp out the back to some other housing so you will have a goblin swamp village. each house will have its own feel but will integrate swamp. ruins, and goblin built structure combinations. Will likely spice it up with some swamp docks and lizardman mounds.

I'm rounding out the terracotta wall with OpenLOCK corner walls and a door-in-a-door style gate.

we will...

July Preview

Cutting it a little tight with the July preview(PDF), I should have a little more space soon to get farther out ahead. Thanks everyone who contributed on the polls, I'll provide a layout of the months ahead with the July release in a couple days.  This month I'm finishing out the first terracotta roofs and windows. I'm also starting on scatter terrain ruins with  smaller scale and ...

Store Front Poll

I am putting out a second poll specifically for store fronts. Be sure to vote on the first poll if you have not. I asked everyone to vote for their top 3, each poll should have almost 900 votes and we are nowhere near that. 

Discord Update: I thought I had failed to set this up correctly and couldn't figure out what it was for exactly, turns out I did set it up and a couple dozen patrons were posting on there for 5 months, I had no idea!:0 Anyways ...

June Release, more images, and Poll

Download Links removed 

Here is your June Patreon Release! The small palisade appears to align well if you want to use it like scatter terrain as in these images. I don't see any reason to add a openlock connector to the corner tower just for this affect. If you want to use it as an outer palisade than the larger road gate palisade should also work with these if you want.

2020-06-03 14:36:47 +0000 UTC View Post

WIP Preview for June

Well, I have a busy weekend ahead of me and a lot of stuff to get finished... but there is enough here to give you a basic idea of where things are headed. Also I have a list of items for a poll, I'm planning on asking everyone to vote on 3 items. Take a look at it and add anything else you want through the comments. I had a couple nice road related ideas that I have left off till I see what ends up being made on the  kickstarter campaign.

Clay tile roofs are coming, I think three ...

Roof Patches A13, A14

Looks like there is some data corruption on a couple new parts I added on these houses.  Here is the fix.

 https://www.mediafire.com/file/nnfrni31rrss18a/A14_Top_Patch.zip/file 

 https://www.mediafire.com/file/yrg1av6ct22je9k/A13_Patch.zip/file ...

Test Prints on the Palisade and Barracks for May

I'll be finishing the details on this and getting it packed. All the main parts are tested and primed. Can't see any reason why you will not have it on the 2nd of May. 6 walls, 3 with totems 3 without. 1 2 story barracks with stairs and doors. we can add more options/stuff in the future.

Roads to Adventure kickstarter is still charging like a mad bull at launch +7 Days. Never had so much action on the days between launch and finale. Guess we finally had an okay idea. Here's a link if yo...

May Preview and Kickstarter Launch

First things first. Roads to Adventure launches today. Click here to visit the campaign. 

Well the April poll didn't give me much clarity except that folks seem open to some variety. May is going to be larger than normal. I'll be releasing a 2 story tall palisade, corner ...

April Release and Poll

You are welcome to leave comments for ideas. I'm going to combine a couple of the ones I got last month for May. It will help drive people over from our April Kickstarter and keep things growing! March saw our most new Patrons since our launch in November, Welcome to all the new faces and thanks for the support:) In addition to helping me you are also helping to fund our pledge to produce around 1000 face shield visors a month that are sent forward to help all types of organization...

April Patreon Preview & April KS News

Today I’m previewing April’s release as well as previewing some stuff for the April 14th Kickstarter.

Notice: Please place building requests in the comment area. I’m going to be putting a poll together.

I’m open to continuing with three buildings, but I am also open to larger single building requests that would count as multiple buildings… if the community support/interest is there.

This months building are about 90% done, I’ll...

March Release Preview and Announcements

We will be releasing some new buildings in a few days. These are all good size buildings. They will come with the stressed/deformed roof shown and a regular version if it is too cartoonish.

I'm sorry about the two mass emails I sent out that were for one person. Patreon messaging makes it easy to mass email without realizing it.

I'm moving road development into a mini- kickstarter launching on April 14th. There is just a ton I want to get done and these roads set up tons of asset ...

Preview for February

Coming in February we have 2 houses and 4 wagon scale roads+ a new scatter terrain concept. The roads include splice sections for both the paths and cart roads that you previously received. More will come in March. Keith Hersey JR. over at roleplayingterrain.com has also been nice enough to help out on checking scale for RPG wagons. I have posted some pictures from his studio showing a 3d print wagon and another of an actual cast miniature wagon. He was nice enough to put d...

A9 Patch, Small But Critical

uploaded one wrong Cap part on A9. Diagram is correct but stl file does not match. Drop in folder and overwrite. I will be posting a large preview of new stuff in the next day.

 https://www.mediafire.com/file/6sqdsywgzur4c7c/CAP_SRC_2_SQ_1DR.zip/file 

Friendly reminder, Be sure to get A7-A9 and roads downloaded before Feb, 2nd

Preview for January 2020 Release of 28mm STL Files

Our January release will offer several new features. I will begin introducing several designs I held back from release when developing the Timber Frame release. This will include shorter stone foundations and 1st floor timber frame shells. This month I will also release roads and a log cabin design. The foundations will come plain and also with an OpenLOCK option so you can snap in the "Paths" released last month right to the front door.  I will also be releasing the first "L Shell" desi...

Preview of December Houses

In addition to the trails, these are the houses we intend to release and make PDFs for. The mix piece with tower will  also allow for some fun exploration with square parts from last month. I'll mention some options in the PDF's so folks can start mixing sets a bit.

I guess I will post on December 2nd or 3rd. I Launched this Patreon on the Nov 2nd which was the day after the billing cycle. I'll continue with this pattern to avoid double billing since this Patreon is "by creation" i...