yoshstudios

(June24 Rewards) DeathBat!

Keep this short-lived Batman streak alive, today we have the infamous Deathbat helmet!!! This one has been in the works for a while now and I know that a lot of you have been waiting for this one. This one does live up to the hype as the details turned out amazing!!!

Eventually we will do a full suit but as you might be aware of, theres just too much to do and suits take forever to make. But it would be cool to make his sword and Sycle in the future.

Features:

-Includes mesh...

(June24 Rewards) HellBat Suit!

At long last the epic Hellbat suit is now available!!! For those of you who have been with us for a while know that we started this at the end of last year, and due to focusing on other things it just got left behind. But that's not the case anymore! Now you can print and wear one of Batmans most unique armor!!

This armor is sized to a 6ft male but i still recommend checking the sizing in armorsmith. It also has bar magnets that you should measure the size of after you print the pieces ...

June24 Kickoff!!!

June is here so that means another great month is upon us!!! To get things started we have the fatman, life size B and this month's older file Sengoku Darth Maul!!

Fatman:

The legendary fat man and the mini nuke are based off the fallout 4 design and if you've been printing out the other fallout stuff than this should be a must make! Especially if your printing out the power armor!

This thing doesnt launch the mini nuke (i know sad) but it does hold it and you can take the m...

May24 Rewards Round Up!!

June is right next door and with the opening of that door, we are closing the door on this months rewards. This has been quite the bombastic month here and we are very happy that were able to make so much this month! Like its quite literally crazy how much we made here and you guys only have to pay 15$ for it all...... That said we will be doing our voting here on your favorite items for the month.

If you have been lurking around our page or your a free member that hasn't taken t...

Painting Contest Clarifications

Hey all! So i have had some good questions about our painting contest. So let me address them here

• Yes you can customize the helmets by doing unique paint jobs and adding extra things to the items.

  ----------------- At the end of the day, as long as the base files you use are from us, then any addition is fine,

• You must be a paid member to participate. That means if you are a free member your submission will not count

• You can enter 2 differen...

  2024-05-28 22:18:09 +0000 UTC View Post

Free Files Update!!

Before anyone comments, please read the full thing. I'm tired of answering questions that could have been avoided if you just could have read.

I showed this off on the Facebook group page the other day but the entry bonus rewards have been reworked! So instead of getting the two free files upon signing up ( red hood and magneto helmets) you will now get these 5 items!

Good news is that everyone has access to them!! So if you've been with us for over a year or just joined, you can...

(May24 Rewards) Magneto '97 Collar

We are still riding the Xmen train here and to cover as many bases as possible, we have made Magnetos collar!! This Infamous collar is based off the tv show but could be easily used for almost every comic look as well! Now you can become the master of magnetism!!!

We made sure to include cuts for X1C sized printer and sized it to a 6ft tall male. I do strongly recommend still checking the sizing of it on armorsmith so you dont print it too small or big

Features:

-Sized to a...

(May24 Rewards) StormBreaker!!!

One of the coolest things to come out the awesome era of infinity war/endgame happens to be this axe!!! We actually made this like 2 years ago but I never released it to the patreon but now it is!!

We did update this axe for modern times, so we included the ability to hold a 5/16" thick rod and it has been cut to fit a X1C sized printer!!

You can find this axe in this months rewards and the soon to be free rewards!!!

Features:

-4.2 feet long

-Has ...

(May24 Rewards) 40K Chainsword!

The second 40k related item has arrived and its the classic chainsword! This bad boy is based of the new game coming out soon. I know there a prob a lot of different versions of this sword so we will prob do as many of them as possible as time goes on.

I still have yet to look into the 40k universe but this one of those swords thats just too cool not to make

Features:

-4ft long

-Holds 5/16" thick rod for extra support

-Includes cuts for larger and X1C sized print...

(May24 Rewards) Zuko's Helmet

The barely used helmet from the show is here!! I wanted to make another fire nation item to go with the soldier helmet we made a few months ago and here we are! This helmet comes with both the normal and a scratched versions for your delight! Idk if there are any Zuko cosplayers in the room but this one goes out to you;)

Features:

-Sized to 24" head size

-Includes normal and damaged versions

-Includes larger and X1C sized cuts

-Includes assembled version for sizi...

Painting For The Win!

That’s right we are doing a painting contest!!! It’s time to put your painting talent to work and show us what you got!!

Here’s a quick run down of the prizes and how this will work👇

The winners will be decided by voting! I will put together a page that will include all the entries and then everyone will be able to vote on there fav helmet!

Prizes:
1st place: kobra 2 max
2nd place: 10 rolls of filament from
3rd place: 5 rolls of filament from
4...

(May24 Rewards) Roboute Guiliman Helmet

Another dive into the 40K universe, we have the Roboute Guiliman helmet!! I dont know much about Warhammer but when we were looking at new helmets to do, we found that this one was really cool looking and decided to make it!

Features:

-Includes clean and textured versions

-Fits X1C sized printer

-Holds 8x2mm magnets

-Includes mesh and normal lenses

-Includes assembled version for sizing

This marks our second 40K helmet we've done now and with the new ...

(May24 Rewards) May23 Throwback!!

Today we are doing a throwback by releasing a file from May23! Enter Wall Breaker! I copied and pasted the original message below but I hope you guys enjoy this original mash up from us!

"Our newest mashup is finally completed, and it asks the simple question of what would the armored titan look like as iron man helmet? Enter Wall Breaker. This helmet has been a long time coming as we had the design drawn for us, by artman02 on insta, last year but due to a lot of factors it had ...

(May24 Rewards) Modern Vegeta Armor!!!

Here is another 100% unique item for you guys!! We took Vegetas classic sayain armor and gave it a modern face lift! This 1 of a kind armor is our own creation and we even included a damaged version as well!!!

One thing we did to make this easier to wear is we made the brown shoulder strap piece hollow so you can fit elastic strap through it. This way the brown piece acts a dectoration instead of actually being used during the wearing process.

Features:

-Sized to a 6ft male...

(May24 Rewards) Ultimate Black Panther

Here is the newest Black Panther mask to hit the comics!!! This comes from the Ultimate universe where things are different but new at the same time and so far the designs and the actual stories have been really interesting. One of the best designs to come from this new universe happens to be this black panther helmet/costume. I like how it resembles a panther but it does something new and doesn't copy the movies status quo that much.

Features:

• Sized to 24" head siz...

  2024-05-23 15:09:18 +0000 UTC View Post

(May24 Rewards) Storm '97 Headband

Another classic X-men related file is headed your way today!! This is Storms headband from the show/comics! I dont have much to say about this as this one is very simple in design. I imagine that if it doesn't stay up on your head you could use some elastic straps.

Also, if you want it to fit better you could use a heat gun on the sides and bend it to fit your face better.

Features:

• Sized to 23" head size

Hope you all enjoy and we will be back tomorro...

(May24 Rewards) New Cyclops '97 Visor

With the X-Men show wrapping up with an epic finale, we got a "new" cyclops visor!!! This old but new visor is just like the other one we made but we included a separate option that has a different outer ear. We did this just for fun and both versions have the ear holder built into it.

Features:

• Sized to 23" head size

• Includes mesh and normal visors

• Includes two different outer ear variants

• Has ear holders built in

2024-05-22 15:19:31 +0000 UTC View Post

(May24 Rewards) Ghoul Pistol

Our last reward of the day is the Ghoul's pistol from the Fallout tv show!!! This beauty of a gun can open up just like the show counterpart and you can put the fake bullets into it!

The Ghoul was easily the best part of the show, and his pistol was simple but epic. This pistol is no different! To open the gun there is a small lever on the side underneath the trigger. This will release the barrel to fold downward. I have already tested it and it worked quite well!

There is a ski...

(May24 Rewards) T-60 Helmet!!!

Another big boy has landed!!! The infamous T-60 helmet has dropped, and it turned out amazing!!! Based of the show and the game this helmet is the real deal! It even opens just like in the tv show and the ranger finder goes up and down as well!!

I will say that if you do want the main face to open up, you will have to print the pins so its a very tight fit in the slots. By the pins being tight will help the face mask stay up but over time you will have to print new pins as they wear out...

(May24 Rewards) Life Size Koffing!!

Our last Pokemon file for the month is non other than Koffing!! This file is a 2 for 1 deal as we made a normal version and a version that can hold a small smoke machine!! Yes thats right! If you buy a small smoke machine off of Etsy, you can put it into this Koffing and it can blow smoke out of its holes!! We also made a base for it( the white part) that you can feed a wire through, in case your smoke machine doesn't have remote control.

Just like usual he is separated by color, and we...

(May24 Rewards) Inosuke's Swords!

Dipping back into the world of anime, here are Inosuke's swords!!! With the newest season of demon slayer out, I figured that this would be the best time to finally make some swords from the show! So this will be the start of doing some of the more famous swords from the show! If you have one you really want us to do next just say so!

Due to the bend in this sword, it doesn't fit a rod all the way through. But it does fit a rod at all the cut intersections. So i recommend cutting the me...

(May24 Rewards) Samus Cannon!!

We made the Samus cannon to go with last month's helmet!! It only seems right that we made this and im happy to say it turned out great!!! We also made it so you can print the light up portions in clear filament so you can add lights to it!!

We also included versions of the cannon that have a handle bar near the end. This way you can wear the cannon and not have to worry about it slipping off or anything. Of course there is a non handle bar version as well!

Features:

• 2024-05-20 13:25:24 +0000 UTC View Post

(May24 Rewards) Sengoku Green Ranger Costume!!

Hey everyone!! I apologize for being silent the past few days, I just finished moving yesterday so I have not been able to hop on here and give out file or answer any messages. But today is a will be a big day here and to kick things off the Sengoku Green ranger costume has been completed!!

This comes from Sxevens amazing concept work and we are happy to continue to work with him and make his artwork wearable!! If you haven't already, please follow him on insta!

This armor has all...

(May24 Rewards) Darth Maul Space Marine

This is the one you've been waiting for!!!!!

At long last our speical helemt which is Darth Maul as a Space Marine is finally done!!!! There is no other helmet out there that even comes close to how cool this is!!!! Ill be honest im not even a Warhammer guy, but when I saw this helmet I knew we had to make it because of how bad ass it look and now we have brought it to life for you guys!!! This helmet did take way longer to make than planned, but the final result is more than wor...

(May24 Rewards) Life Size Primeape!!

Primeape is our newest Pokémon to be printed!!! This fighting type Pokemon is quite the hit...... But in all seriousness, this Pokémon is quite the thick boy and also stands above 3ft tall!!!

Primeape isn't one of my favs from back in the day but I know for some of you he might be. Still tho I am happy to add him to our collection and see some of you guys make him!!

Features:

• Life size!

• Includes 4" and 6" versions

• Includes printable h...

  2024-05-12 21:32:08 +0000 UTC View Post

(May24 Rewards) Updated Wolverine Helmet!!

The long awaited update to our Wolv helmet is now available!! You can find it with the rest of the Wolv armor files from earlier this month. It's in that same folder but has a separate folder inside of it just for this.

This updated helmet is the real deal and we really just had to make minor adjustments to get it right. That said you guys can rest assured that you are getting the best file possible. Not only does it include all the features we did for previous one: textured, non-textur...

(May24 Rewards) T-45 Power Armor Ready For Duty

Hey guys!!! I know its been a while since our last drop but I am happy to say that the big boy is finally ready!!! This amazing suit of armor is all ready to be printed not only by large printers but by X1C sized printers as well!!! We went pretty crazy on this suit of armor and this suit of armor is quite amazing!!! We really did our best to make this the best power armor out there for you guys, I mean just take a look at those cuts...

One thing I will note is that we designed this to ...

(May24 Rewards) Revenge of the 5th!!

This is the way....

Minecraft styled Mando and Grogu are here to celebrate a late Star Wars day!!! Now I know what your thinking, these are not the prized Star Wars files you might be looking for but they are different from the rest;) Honestly, we made these files over a year ago but due to life I never released them. But since its one of those Star Wars days, this is the perfect time!

Both of these items are based off of there in game Minecraft looks and the Mando helmet is actua...

(May24 Rewards) DP3 Wolverine Set

Deadpool 3 is approaching fast! To prepare for the movie of the year, we made the hard parts for Wolverines costume!!! This armor set has everything you're looking for if you're planning on suiting up for the movie or a con. I personally love this look for Wolv and I look forward to seeing this on the big screen!

As of right now this armor set does not include the helmet as we are waiting to update our helmet later this month. When we update it there will be a post to go with it.

...

May24 Kickoff!!!!

Its gonna be May....

May is officially here and to kick things off with a bang here are two amazing files for you guys!!! Today we have the highly requested life sized Charizard and a special mash up of Samus + Doom guy, which we are gonna call: DOOMUS

Doomus is quite a large helmet which is keeping in the style of a Samus helmet as this looks normal if you have the full armor on. But dont let that scare you as this helmet is really dope and one of the most unique Samus/Doom guy h...