I thought that most people prefer busts over full figures - I was soooo wrong... at least according to my poll.
In the first half an hour it was already obvious what people want :)
I'm currently printing this model and if everything goes ok you will get it tomorrow or the day after!
2019-09-25 21:34:13 +0000 UTC View PostI just love Trick 'r Treat movie, it's one of my favorite movies to watch on Halloween.
October will be all about Halloween and I will tell you more about my plans in the next post but right now I just wanted to share my progress on Sam. His head is almost done but I can't decide should I go for a full fig or just the bust. What do you think?
Hi people!
I have just uploaded Mini Davy Jones!
Model is available in Dude, Holy Moly, Holy Guacamole and El Dorado tier.
As always model comes in a single and multi color version.
Model can be printed without any support but as always, I advise that you should at least add some unde...
2019-09-22 18:51:53 +0000 UTC View Post
I will do some test printing today, if everything goes ok this little dude will be available in the next few days.
Hi people!
This is now my 3rd Logan, before this one I did mini Logan and Wolverito :)
The story behind this one...
Inspiration came from the old Logan, at least that's how it's started. These days everyone connects Logan with Hugh Jackman but I was more interested in a version where he is much stronger, shorter and older.... my mind went places and I started thinking about one alternative universe where Logan is still getting old, he doesn't care about stuf...
2019-09-17 08:27:52 +0000 UTC View Post
Hi people!
I've just uploaded files for Mini Dr. Manhattan!
Model is available in Dude, Holy Moly, Holy Guacamole and El Dorado tier!
There are two versions of this model - both are available as single color and multi material.
What's the difference between them? Weeeeell... let's just say that one version of the mini dude has his own mini dude visible :D
There are two opti...
2019-09-15 15:17:49 +0000 UTC View Post
Hi people!
I had a weird pirate phase last few days because I watched some Pirates of the Caribbean movies with my kid and the end result was this Blackbeard bust. I hope you like it. Now I'm thinking about making mini Davy Jones too :)
This bust is available in the Holy Guacamole and El Dorado tier!
2019-09-12 08:38:40 +0000 UTC
View Post
Hello people!
Ten years ago Watchmen (the movie, not the comic) was released and I still remember it as one of the coolest superhero movies I've ever seen. Comedian and Rorschach were my favorite characters... yeah, I like bad guys, what can I say :)
Now I've finally started making stuff from that world, Mini Rorschach is the first one and in a few days you will get access to another one - Dr Manhattan.
Mini Rorschach is available in Dude, Holy Moly, Holy...
2019-09-07 13:00:03 +0000 UTC View Post
Hi people!
Daredevil is out! It's available in Holy Moly, Holy Guacamole and El Dorado tier!
I did a few test prints in the past few days and I can say that this model can be printed without any support.
2019-09-02 12:05:06 +0000 UTC
View Post
Hi people!
Another month is almost done and it's time to see what I have made in case you have missed some of my notifications.
The month have started with my Ent/Groot inspired model.
Jane - female Thor was came shortly after
2019-08-29 11:12:31 +0000 UTC
View Post
Hi people! Just a quick teaser of the bust that should conclude my little bust trilogy (The Punisher, Kingpin and Daredevil).
This model will be out in a few days!
I've released a new video the other day so if you still haven't seen it you can do that 2019-08-26 12:51:10 +0000 UTC View Post
Kingpin is out!
This model is available in the Holy Moly, Holy Guacamole and El Dorado tiers.
It comes in two parts and should be printed without any support.
Have a great day!
2019-08-21 13:00:02 +0000 UTC View Post
"He's a spy. Captain, he's the spy. His secrets have secrets." - Tony Stark
Mini Nick Fury is out! It can be printed without any support but some people should use a little bit of the custom support under his crotch and middle (bottom) part of the cape.
2019-08-19 07:22:34 +0000 UTC
View Post
Hi people!
I have a Yondu (Disney Infinity) figure on my table since last year and for a long time I wanted to make a mini version of it but I just didn't had a clear vision for it. It took me a while but I think this is it!
This one is a very special mini dude to me. I've posted my renders on instagram and James Gunn, the writer/director of Guardians of the Galaxy movies have seen it and...
2019-08-14 10:12:12 +0000 UTC View Post
Hello everyone!
I've just released Punisher bust and it's available in my Holy Moly, Holy Guacamole and El Dorado tier!
Model comes in two pieces and it doesn't need any support!
This was an alternative version but as a single color sculpt it didn't look that good so I had to discard it. Ma...
2019-08-12 13:00:00 +0000 UTC View Post
Hi people!
I wanted to show you my work on another mini dude - Yondu :D
This one should be ready sometimes next week!
Heeeey,
my new favorite mini dude is out! I'm really happy how he has turned, especially because he doesn't need any support!
Homelander is now available for my patrons in Dude, Holy Moly, Holy Guacamole and El Dorado tier.
Have a great day people!
2019-08-06 12:24:16 +0000 UTC View Post
I'm currently testing this model and I'm happy to announce that he will be support free!!!
If everything goes well it will go online tomorrow or the day after.
Also you will get Translucent with him.
Translucent in his true form.
Have a great day people!
2019-08-05 12:42:48 +0000 UTC View Post
I've finished watching The Boys last night... this dude is one of my favorite characters. :D
Doing some tests right now :)
2019-08-04 13:26:50 +0000 UTC View Post
Heeey :)
My female Thor bust is now available in my Holy Moly, Holy Guacamole and El Dorado tier.
Model comes in two parts, bust and the base and while some prints were successful without any support I would advise adding some under the chin and wings (just the first part close to the jaw).
Heeeeey :D
This was one of the most relaxing sculpts I did so far. Everything I did here was without any special brushes, every carved piece was made by hand and it kind of felt like drawing stuff in the sand... this also rhymes so I will keep it like that.
This model is available in my Holy Moly, Holy Guacamole and El Dorado tier.
This model is also available on Gumroad!
I started making this guy yesterday :)
What do you think? :D
2019-07-31 11:51:59 +0000 UTC View Post
I've noticed that sometimes people don't see or they don't get my notifications and then I hear: Oh, when did you release that one???"
So let's throw some images here so you can see if you have missed something :)
Steampunk Iron Man
Mini Ghostbusters
Mini Ghostrider
<...
2019-07-30 08:42:19 +0000 UTC View Post
I got one really cool Marvel encyclopedia for my birthday and inside I've found so many characters I've never seen before. One of the characters looked like he's Slimer's little brother and I've remembered his name just because I like to act like a 5 year old boy and his name was very similar to Poop...
Yesterday I did this quick little model just for fun and the whole process is published on my 2019-07-29 06:55:55 +0000 UTC View Post
Hi people!
Finally I can remove this one from my list!
This mini dude is available in a few variations - standard mini dude pose and a flying one.
Flying Mini Iron man has one version where base is separated but i wouldn't advise that you use that one because it' made for dual prints.
Both versions have their multi material versions.
So far I have made few pri...
2019-07-25 09:54:08 +0000 UTC View Post
Hi people!
I have worked on this model for a few hours today... I decided to carve in every detail without using any premade stuff and right now I'm very tired... I haven't planned to show you anything yet but I like how the model looks from this angle, kind of reflects me right now... just sitting in my chair, tired...
Have a good day people!
2019-07-21 17:15:25 +0000 UTC View Post
Hi people,
I have promised to make this one for such a long time and I have failed bunch of times but now it's finally taking some proper shape.
At the same time I'm working on the Groot and I'm not gonna share anything yet, but I think that's gonna be one epic thing to print :D
Have a great weekend people!
Hi people!
My plan was to release this model on Wednesday but since I'm gonna go on a business trip it's better to release it now :)
Model is available in Holy Moly, Holy Guacamole and El Dorado tier.
You have a few options, you can print only Harry with the base or you can print him completed like in these pictures.
There is also one version of harry where his hand is separated for easier printing. Only har...
Hi people!
I think by now every mini dude fan here knows that Mini Hellboy was the first one that I have created. A year later I've went back and did a small makeover on him :)
I really wanted to add more details on him and try to fix some issues I had in the first version.
When I created it I knew that it will re...
2019-07-15 08:47:14 +0000 UTC View Post
Hi people!
Mini Ghost rider is out and personally I think it's one of the top five minis I have created so far :)
As always, this mini dude is coming in a single and multi color version. I have made few prints and I can say that this model doesn't need any support BUT I suggest usage of brim, raft or just a little bit of the custom support under the crotch.
2019-07-12 07:32:06 +0000 UTC
View Post