~Advanced research facility for the greater good with domed structures, landing pads, and autonomous drones~
Hey Miniature Makers,
This month we're bringing you the cutting-edge technology of the Tau Empire! Craft custom Tau buildings with ease using our command center walls and floors, along with research facility walls and more.
The rollers in the set give you a huge range of wall and floor textures for making terrain pieces for your gaming table. The Taulium...
2024-05-01 23:24:38 +0000 UTC
View Post
Hey Miniature Makers,
Standing just over three-inches tall, this weeks Elven Forest Obelisk is a great muti-use piece of terrain to add a little extra magic to your setup.
Add this mysterious piece into your game for your adventurers to stumble across, serving as a great centerpiece for your Elven or Forest terrain.
Use it as a focal point in your village, a waypoint for travelers making their way through the elven woods, or a totem that reveals forgotten secrets of the...
2024-04-29 01:41:11 +0000 UTC
View Post
Hey Miniature Makers!
This week we went for a bit of experimentation with a new tool type. We made a pillar template that you can use to make two different pillar designs from foam.
Foam is a great material as it is so cheap, so you can make a huge number of pillars for very little cost. Perfect for a DnD map or for making pillars for a large terrain build.
How it works
For it to work you will need a hotwire and some foam cut to 10cm length and ...
2024-04-22 14:53:19 +0000 UTC
View Post
Hey Miniature Makers!
This month we're bringing you some creepy crawly bases straight from the depths of the Underdark, as well as some futuristic Cyber Hacker bases!
What goes better with some spider-infested bases than some spider infested scatter!🕷️🕸️Paired with this set we've made you a 3-piece basing scatter set that's sure to add some great detail to these bases. Featuring forgotten remains of an unfortunate adventurer that our spider friends have covered in webs a...
2024-04-16 14:59:08 +0000 UTC
View Post
Hey Miniature Makers,
Because you guys deserve only the finest upholstery
This week we made a Gothic, vampiric throne to compliment this months Print 'N' Roll Set: Castle Raven set!
This should make the perfect addition to any boss room in a dungeon or the focal point of a diorama.
It does not need to just be used for fantasy though! It would not look out o...
2024-04-15 18:45:36 +0000 UTC
View Post
~Advanced research facility for the greater good with domed structures, landing pads, and autonomous drones~
Coming May 01, your monthly set will feature a full set of incredible texture rollers to add life to your terrain, along with stamps and add-on models for added detail!
Poll Results: (Combined results from Patreon/Tribes members)
Poll Closes: Friday, April 12, 2024 (end of the day)
Print N' Roll Set Release Date: May 01, 2024
How Does it Work?
Prepare for battle Miniature Makers!! Vote in a new poll each month to go to battle for your favorite theme option. For Patrons and Tribers only, this is your direct line into the Custom Miniature Maker workshop. We want to hear what you want! The theme that receives the most votes wins, and we'll announce the ...
2024-04-09 00:09:44 +0000 UTC
View Post
Hey Miniature Makers
This week we we're bringing you a model that despite it's simplicity, can be a great terrain enhancer and also add some fun functionality in-game. These dungeon Doorways are particularly useful when creating dungeons, as you're able to open or close the door with an easy push. This makes it simple to set up your dungeon, opening or closing off pathways as needed. No messing around with gates, removable doors, or separate pieces! The bar-covered port holes offer a sm...
2024-04-08 00:13:51 +0000 UTC
View Post
Hey Miniature Makers
This week we have made a set of flags waving in the wind or the blasts of battle!
There are two versions to allow for some variation on your battlefield or fortress.
We left the design plain so that you can paint your own army or faction symbols and markings on them.
They are the correct size to fit onto bases along with your minis and have a mount they slot into to allow them to be fitted securely onto buildings, vehicles and minis.
I find...
2024-04-01 20:14:12 +0000 UTC
View Post
~Wander through the forsaken fortress where darkness reigns and echoes of terror linger~
Hey Miniature Makers,
Get ready to bring the terror of Castle Raven to life! First, we'll help you step into the chilling world of Castle Raven with our highly detailed texture rollers, designed to transport you to the eerie halls of a great vampire lord. From intricate drape-covered stone walls adorned with gargoyle carvings to ancient vampire glyphs etched into rough stone floors, t...
2024-04-01 19:55:49 +0000 UTC
View Post
Hey Miniature Makers
This Cauldron fits an LED Tealight table inside it to light up the top where the brew is bubbling. This works with any LED tealight but if you get a flickering one or a green one it works even better!
The liquid part prints separately to the caldron so that you can print the liquid in clear resin of filament to let the glow through.
There are two versions of the liquid part, one with just the bubbling brew and one with bones floating in it for those who ...
2024-03-25 14:14:02 +0000 UTC
View Post
Hey Miniature Makers!
This week we have some Modular platforms that can rise to any occasion! With Four different Sci-fi/Industrial square tiles to choose from and Stackable Supports, you're free to create a platform that's the perfect size, height, and style for your setup. The outer Path Tiles are there to help clean up the look of your platform and are a great option to give larger modules a more official appearance. Lots of ways to mix and match your tiles to get what you're going f...
2024-03-19 01:36:57 +0000 UTC
View Post
Hey Miniature Makers!
This month we went for some rocky bases that will be great for all manner of general-purpose use from gravelly paths to alien planets and a more themed set of ancient mosaic tiles. To go with these we made two basing scatter sets for your guys, a set of small plants and broken statue parts.
The best part about the bases this month is that they can all be combined and used as one giant set should you wish to make tiles and stone floors littered with plan...
2024-03-15 17:50:55 +0000 UTC
View Post
~Wander through the forsaken fortress where darkness reigns and echoes of terror linger~
Coming April 01, your monthly set will feature a full set of incredible texture rollers to add life to your terrain, along with stamps and add-on models for added detail!
Poll Results: (Combined results from Patreon/Tribes members)
- Golden City of The Thunder God: 73 votes (21%)
- Halls of Valhalla: &n...
2024-03-11 16:36:01 +0000 UTC
View Post
Hey Miniature Makers!
It's a double file this week bringing you both a new roller and a new tool. We have had quite a few of you guys mention you use our rollers for more than just making terrain and bases. It seems that they also make good tools for pottery and general sculpture work.
The files this week play into that with a version of the skull roller with larger skulls that will work better for things that don't require the skulls to be in 28mm scale.
We also included th...
2024-03-11 13:12:21 +0000 UTC
View Post
Poll Closes: Saturday, March 09, 2024 (end of the day)
Print N' Roll Set Release Date: April 01, 2024
How Does it Work?
Prepare for battle Miniature Makers!! Vote in a new poll each month to go to battle for your favorite theme option. For Patrons and Tribers only, this is your direct line into the Custom Minia...
2024-03-05 15:17:14 +0000 UTC
View Post
Hey Miniature Makers!
Last week we released our first wet pallet! If you've never seen these before, they're a tool used to keep your miniature paints from drying out on your pallet (as they love to do 😒)
Here is that post again if you want to go back to check out the original Wet Pallet
Recap of How it Works
- Start by inserting a sponge. It work...
2024-03-04 23:07:47 +0000 UTC
View Post
~Navigate the twisted corridors of the occult where eldritch entities lurk in the shadows~
Hey Miniature Makers,
In hidden depths, the cult waits for its grand priest to awake from his long slumber.
Soon the Old One will rise from his dark city below the waves and again bring all earth under his maddening corruption.
The Cthulian Nightmare set gives you guys everything you need to make sacrificial chambers an...
2024-03-01 22:40:03 +0000 UTC
View Post
Hey Miniature Makers!
For this week we made you a tool that should be pretty useful for painting your minis. A wet pallet!
It is made so that it slots together to tightly hold the moisture in and so that it holds the paper in place.
How to Use
It fits either 3 small cheap kitchen sponges or you can stack the flatter sponge cloths instead if you would rather. Then just cut a piece of parchment or wet pallet paper to size, fill the bottom with wate...
2024-02-26 13:32:59 +0000 UTC
View Post
Hey Miniature Makers!
Need to break up that approaching frontline? We've got just the thing!
These Wooden Stake Barricades can be used to help provide some security around just about anything..from the most basic of camps to fully constructed fortresses.
No need to glue these guys down! They're freestanding and can be repositioned as needed, which is helpful for those who need to change up those outer defenses regularly.
Super useful for providing that addi...
2024-02-18 16:40:27 +0000 UTC
View Post
Hey Miniature Makers!
For this month's base, we went all in with stone designs! Some very highly detailed dwarven-style tile bases along with some more widely useable stone hex bases as well. The concrete hexes would work for everything from alien planets to dungeon floors and the dwarven stone tiles would work for ancient dwarf armies and squats in the far future.
The base scatter this month is some real general-purpose stuff that will work amazingly on a lot of different base de...
2024-02-16 02:04:11 +0000 UTC
View Post
~Navigate the twisted corridors of the occult where eldritch entities lurk in the shadows~
Coming March 01, your monthly set will feature a full set of incredible texture rollers to add life to your terrain, along with stamps and add-on models for added detail!
Poll Results: (Combined results from Patreon/Tribes members)
- Cthulian Nightmare: 166 votes (46%)
- Tombs of the Desert Guardians:
2024-02-12 16:49:28 +0000 UTC
View Post
Hey Miniature Makers,
This week on top of the weekly files we have brought one of our old favourites for you guys, the Tealight Tables!
They are made to slot and LED flickering tealight inside to make realistic candle-lit tables!
You can make them even more realistic by snipping the tip of the fake flame from the tealight and slotting it into the candle.
Set Includes:
- 4 Tealight Table Variants
- Wine Bottle
- Goblet
...
2024-02-12 15:08:21 +0000 UTC
View Post
Hey Miniature Makers!
For this week we bring you a set of two grass rollers!
There is a finer grass roller perfect for open fields and short grass and one with much thicker grass blades, made for denser and wilder grass.
Although both rollers work well in FDM and Resin, the wild grass roller was made with particular consideration for FDM printing.
You can use these rollers to make bases and dungeon tiles for open grassy lands!
In the photos, we did a little compa...
2024-02-12 15:07:17 +0000 UTC
View Post
Poll Closes: Saturday, February 10, 2024 (end of the day)
Print N' Roll Set Release Date: March 01, 2024
How Does it Work?
Prepare for battle Miniature Makers!! Vote in a new poll each month to go to battle for your favorite theme option. For Patrons and Tribers only, this is your direct line into the Custom Miniature Maker workshop...
2024-02-07 14:33:26 +0000 UTC
View Post
Hey Miniature Makers,
This week we made a modular wooden guard tower for you guys! As it is modular you can build it how you want and as tall as you want with as many platforms as you need!
It is made to fit up to four 32mm bases on each platform level so you can easily place a couple of guards up there and also fit your rogue to assassinate them.
They are made to fit as a set with the palisades and the barriers we have recently made as well, so you can put them togeth...
2024-02-05 20:10:59 +0000 UTC
View Post
Hey Everyone!
Our latest Print 'N' Roll set is now available for download! Not a member yet? Become one today by joining our Patreon to get it at the very best price!
This is just a small preview of this month's set to give you an idea of what our sets are like!
**MEMBERS** This set is in your MMF library N...
2024-02-02 17:15:33 +0000 UTC
View Post
~A stronghold defense against the encroaching darkness~
Hello Miniature Makers!
Get ready to defend your territory! We've packed this set with everything you need to build a solid defense.
From rugged concrete paving slabs to battlement rollers, each piece is designed to give your terrain that authentic Imperial flair. While the Concrete Fortification Wall Roller will let you build your megastructures, the Damaged Concrete Fortific...
2024-02-02 00:14:27 +0000 UTC
View Post
Hey Miniature Makers!
Let's start the week off right! This Wooden Battleground Barricade is an easy print, cleans up quickly if you're printing with resin, and will look great with just a simple paint job. Print it with attack ports or without...or both :)
Set this defensive-style barricade up in front of your outer wall to take cover from incoming archer attacks or protect your camp perimeter. Place your best soldiers at the attack ports to cut down the enemy before they'...
2024-01-29 15:42:05 +0000 UTC
View Post
Hey Miniature Makers,
This week we have made a set of brick ruins for you guys!
These ruins should work well for pretty much all games and would not look out of place in the far future, modern day, or the distant past.
You can add a first floor to the ruins or leave them without the floor, you could even mirror them and do one with a floor and one without to make it into an even bigger set.
There is an FDM printable version of the ruins with magnet holes so...
2024-01-22 19:05:17 +0000 UTC
View Post
