Please note that there will not be much of an content update for now!
I have worked majority of the month on my completely own vrchat model for muscle stuff. But, even though spending painfully alot of time on it, it is still f'ucky and keeps breaking and setting me back, requiring more work than I orginally thinked until I could show it off.
Thank you for understanding! <3
(Ps, it is perfectly okay to jump out, and hop back later if fe...
Content warning: Cockfucking
Animations in attachment
Optional link: Clicky
On second backside view render, something glitched on her horns. I'm leaving it now though, as each took over +28 hours to render. :x
Something I kinda wanted to do. Turned out bit silly, but was still fun to do.
It's not perfect, but felt it being good enough for a ...
Animation in attachments.
Optional link: click here
What if Edria has a dick? Wanted to make it for awhile now, took a moment, but here is an short animation about it.
I was bit rushing the animation, so I could added much more to it and more motion, but felt this might be good enough for now. So enjoy, more to come. :v
2022-03-31 02:12:39 +0000 UTC View Post
Heya, sadly this month doesn't have much, besides been working on new Elia model, to be more close to her recent drawings. Thicker and meaner.
It's still terribly WIP. Will have breasts, cock, probably trying to make a 3d print version, then for vrchat and such.
This month been kinda rough, been helping family and at their place, limited mostly to a laptop. Then of course the recent political climate, stress and anxiety has been high, when living also next t...
2022-02-28 07:36:44 +0000 UTC View Post
Two pictures with alts to show her new size. She used to be about ~7ft(215cm), and her new one is about ~9ft (274cm).
It's doesn't seem that huge at first, but it over doubles her sheer mass and weight in scale. Making her even more of an monster in mass.
Also small life update, it was bit rough month when there was near-death situation with close relative which put me in bad place mentally. Other news, I have been working with ADHD diagnosis past ove...
2022-01-31 06:30:49 +0000 UTC View Post
Because people like bigger?
Another for my piles of wip to linework later. :’)
2021-12-28 01:44:14 +0000 UTC View Post
Something I really wanted to do, so enjoy this muscled fuck-beast of Elia. Made with ipad while at folks for holidays.
Also late Merry Christmas for ya all.
Edit: Resolution issues when trying to post as mobile.
2021-12-26 00:38:26 +0000 UTC View Post
Here it is, the 3D-print file of Edria that I showed off last month. :V
(updated) Link for the file: DM ME FOR THE LINK
Password: nOvEmBeR_2021_eDr1A_aGaIn
It includes bunch of STL files, with the cuts that I used, but also the full one if wanting to try to print without any seams, or make your own cuts.
I do assume basic level of understanding when comes to 3d printing, knowing your FDM or SLA, making supports, hollowing and etc.
I finished bigger Edria print earlier, taking close to 40 hours in total, not counting few failures, 450-500g of resin when including supports (even when hollow model). Resulting about 25cm/9.8" tall, and 380g heavy. With less support structure "pimples" as the first one.
I would still nitpick that the *seams* where I connect the parts is still fairly visible. I can try to ofcourse fill it, and cover it whenever getting my hands on model painting tools.
I found also my...
2021-10-30 19:19:29 +0000 UTC View Post
The print is done, it turned out alright, but there is many things i need to fix and polish.
Took about 14 hours in total to print. Head, upper body, lower body and tail were in seperate parts.
I need to adjust the connection points, as they did leave kinda noticable gap and seam. My biggest mistake was that I did very heavy supports, which left nasty marks on the backside upon removal. This was though first time doing them, and wasn't sure how was needed.
I will print agai...
Something I want to tease. I might got a SLA 3d printer now, and testing things out on what works and what doesn't. Total new on this, but learning.
Also to consider if making 3d print files for patreon/sale would be a thing too.
Download link: HERE
Zip password: Hutska3DBeef_September2021
Because I don't have much anything for the month when comes to 3D, so I'm sharing away this model I did earlier. It's just a sculpture, but if curious about inspecting it closer, feel free.
It's still fairly large file size at ~180mb, (orginal would been ~1gb file), but managed to decimate most and keep still all...
Elia one will probably be more final work on october, could make a nice halloween one.
Dragoness one is random character, others are Vali. I've been slowly picking up traditional as well.
Edit: Forgot one more.
Animations link: Click here
They are pretty much updated ones from last month.
Sadly everything is slow and painful right now, rig keeps breaking, constant trial and error, more redoing on things. I'm not 100% sure what is causing such pain right now, it's been mostly around the rig I'm using and it probably doesn't work too well with hyper muscles by how it's current set up.
<...
ANIMATION LINK: Click here
(Including few extra shots.)
Turnaround animation for Edria. It's not fully done (wip), there will be more adjustments. It's over 550 frames, so for now it's rendered in Eevee. Extra showing some stuff I did with abs.
Thanks for everyone patience, sadly most of my month went into trial and error and redoing many bits, then making the much more shr...
Heya! Edria's new model is pretty much done. Ready for animations and so on, that I will focus on next month, when didn't have time for that yet.
This is pretty much her base body, from where I'll plan to do muscle growths, more extreme shreds and all that jazz. Even got hands on some muscle-simulation addons for blender.
Admittedly getting to this point did take more than I orginally planned.
Here is some renders for the time being. Everything, but one is rendered with blen...
Because recent events of Elia not really getting much attention and I haven't done anything extreme for long time. I wanted to finally give a try to make a *simple* muscle-flex-growth comic. I have never really done anything like this so it's first time for me.
2021-05-31 13:06:49 +0000 UTC View Post
I have hardly drawn backs for very long time, so had to do alot of studying. :,>
2021-05-29 12:26:39 +0000 UTC View Post
I have been working on completely updated and reworked version of Edria.
Where earlier one had some anatomy issues that made animations bit harder and ways that didin't look that good. This one *hopefully* makes them better and overally ending up much more detailed model for animations and growth stuff.
It's still work in progress with details and shapes, but wanted to show what it's is currently going on.
Also, apologizes for lack of activity past month. It has been men...
Small assortment of various sketches.
Apologizes for lack of activity past month. It has been mentally heavy.
2021-04-30 02:53:25 +0000 UTC View Post
Linearted drawing. Felt like it took bit more effort than normally, when tried bit different brush for it. T_T
Also Vali again cause i'm bit too much into this boy. Kinda starting to look like Elia and all, specially when his hair is now blown to the side from the small shockwave by his bicep flex. They are related, and they do share *some* differences I swear, more to that later.
Anyway, enjoy some hyper flexing of a bat boy, who totally doesn't make up his bi...
2021-03-25 12:41:58 +0000 UTC View Post
Few sketches'n doodles i've done recently. Bit of new random character, some lizard gecko or something, with moosl pp and fat tiddi. :v
2021-03-06 22:38:15 +0000 UTC View Post
Animations link: CLICK HERE
3 different animated perspectives of Edria's back, flexin and throbbin.
They are rendered in 1080p, there was some bit of blurryness and noise, even with high sampling rate. Each one still took all night though. :v
I'll be postin one of them on twitter in 720p.
Small news:
Besides also dr...
Hello!
First, I'd like to thank you all for pledging to my early and messy stage of patreon! It means alot and small ammounts does help me at my current stage of life.
There isin't much yet, but hopefully soon it will satisfy. I'm trying to push myself to be very active in art again, without having to stress too much about real life. Pump out more doodles and sketches, then seldomly push out finished illustrations, where I try to maxim...
2021-02-17 21:18:35 +0000 UTC View Post
Something I had on works, planning as full illustrations with few alt bits when comes to her body.
2021-02-17 18:44:54 +0000 UTC View Post
Animations link: Click here
Latest when comes messing around with Edria's model. Getting a human model really added the extra fun to it when could get idea of her sheer mass.
2 of the animations are rendered in Eevee, other 2 in Cycles.
Animations link: Click here
Some extra renders and animations I did when reworked her old model, orginally from 2019.
Folder Link: Clicky
Here is few random images. Extra test animations, etc. Found in the link.
In the end, I wasn't "super happy" with the model, but i'm looking to remake it on this year.
2021-02-17 17:25:49 +0000 UTC View Post
More random lineworks of him. More extreme vascularity version and hyperflex. Including also timelapse i wanted to try out for first time.
In this i tried to new linework brushes that could feel more comfortable.
Two of first drawings about him. Wanted to pretty much do a male bat character that is less in height than normal person, but expand greatly in muscle size.
Later on there has been small changes. One is that I went more for humanoid pp.