SW3D Patreon

🗣️ Q&A (COMMON QUESTIONS AND ANSWERS)

Added 2023-06-16 12:06:40 +0000 UTC

1. WELCOME PACK

After subscribing to us, you will immediately get a welcome pack with our models, and a special promo term that changes every month. Please take a look at the email sent after your subscription. All the Star Wars swag will be waiting for you there!

IMPORTANT: If you don't get/find it, write to us, and we will send it as soon as possible, my dear amigo!

Here is the list of the models you will get if you subscribe today:

1 - Mandalorian Sculpture 1/6 tested and ready for printing

2 - Mandalorian Bust 1/4 tested and ready for printing

3 - Boba Fett Bust 1/4 tested and ready for printing

4 - Luke Skywalker Bust 1/4 tested and ready for printing

5 - Grogu Bust 1/4 tested and ready for printing

6 - Star Wars Billelis Tribute tested and ready for printing

7 - Darth Vader Bust 1/4 tested and ready for printing

8 - Han Solo Bust 1/4 tested and ready for printing

9 - Chewie Bust 1/4 tested and ready for printing

10 - Leia Bust 1/4 tested and ready for printing

11 - Darth Revan Bust 1/4 tested and ready for printing

12 - Todo 360 Droid 1/4 tested and ready for printing

13 - Lightsaber Vase tested and ready for printing

14 - Darth Maul Bust 1/4 tested and ready for printing

15 - BB-8 Droid tested and ready for printing

16 - D-0 Droid tested and ready for printing

17 - N-1 Starfighter Mando tested and ready for printing

18 - Anakin and Vader Book Holder tested and ready for printing

19 - Ahsoka Bust 1/4 tested and ready for printing

20 - Christmas gifts model tested and ready for printing

21 - Darth Malak Bust 1/4 tested and ready for printing

22 - Fennec Shand Bust 1/4 tested and ready for printing

23 - Cad Bane Bust 1/4 tested and ready for printing

24 - Anakin Skywalker Bust 1/4 tested and ready for printing

25 - Obi-Wan Keboni Bust 1/4 tested and ready for printing

26 - Yoda Bust 1/4 tested and ready for printing

27 - Darth Sidious 1/4 tested and ready for printing

28 - Count Doku Bust 1/4 tested and ready for printing

29 - Asajj Ventress Bust 1/4 tested and ready for printing

30 - Mace Windu Bust 1/4 tested and ready for printing

31 - Quin-Gon Jinn 1/4 tested and ready for printing

32 - Grievous Bust Warrior 1/4 tested and ready for printing

33 - Grievous Bust Cyborg 1/4 tested and ready for printing

34 - Bossk Bust 1/4 tested and ready for printing

35 - IG-88 1/4 Bust tested and ready for printing

36 - Dengar 1/4 Bust tested and ready for printing

37 - Zuckuss 1/4 Bust tested and ready for printing

38 - Jango Fett 1/4 Bust tested and ready for printing

39 - Aurra Sing 1/4 Bust tested and ready for printing

40 - Boa Fett Bust 1/4 Bust tested and ready for printing

41 - Zam Wesell 1/4 Bust tested and ready for printing

42 - Black Krrasantan 1/4 Bust tested and ready for printing

43 - 4-LOM 1/4 Bust tested and ready for printing

44 - Cal Kestis 1/4 Bust tested and ready for printing

45 - Second Sister 1/4 Bust tested and ready for printing

46 - Anakin Clone Wars 1/4 Bust tested and ready for printing

47 - Obi-Wan Clone Wars 1/4 Bust tested and ready for printing

48 - Moff Gideon 1/4 Bust tested and ready for printing

49 - Bo Katan 1/4 Bust tested and ready for printing

50 - Luke Skywalker Snowsuit 1/4 Bust tested and ready for printing

51 - Han Solo Snowsuit 1/4 Bust tested and ready for printing

2 DECEMBER 2025 TERM (PROMO TERM)

1 - Baze Malbus Sculpture

2 - Leia Organa Sculpture

3 - Moss Eisley Cantina Band Part 2 Sculpture

4 - Baze Malbus Portrait Bust

5 - Leia Organa Portrait Bust

6 - Moss Eisley Cantina Band Part 2 (Instruments)

7 - Grand Inquisitor Lightsaber

8 - Cantina Band Diorama Complete

9 - Guardians of the Whills Diorama

2.1 JANUARY 2026 TERM (NEW TERM)

Models coming by the 31st of the month (included in your subscription)

1 - Darth Vader Battle Damage Sculpture

2 - Mara Jade Sculpture

3 - IG12 With Grogu Sculpture

4 - Darth Vader Battle Damage Portrait Bust

5 - Mara Jade Portrait Bust

6 - IG12 With Grogu Portrait Bust

7 - Mara Jade lightsaber

3. MONTHLY TERMS

Each month, you get 2 Sculptures, 2 Busts, 1 Droid, and 1 Lightsaber, based on the Star Wars universe + Welcome Pack + Promo Term

4. DATE RELEASES

Normally, our terms are released starting on the 31st of each month. If you do not get the Patreon message in your inbox, please let us know! We will be ready to send the term your way, amigos!

5. LINKS TO DOWNLOAD:

As you can expect, our models are downloaded through a link! The link goes to a platform called Gumroad, where we have our main store for our Patreon. There you will be able to access the models with the respective link, which had a discount applied, and will let you download your models for FREE.

Inside each Gumroad link, you can find the following zip files: Non-supported zip file: It has the STL for you to put your own supports!

Also, you will find a folder called “FULL PIECES” where you will find combined pieces of the model like Full base, Upper Body, Lower Body, and such! Ideal for the dudes with big printers, who want to minimize the post process in the models.

One Piece: The files that are gonna make your minis way easier! They consist of the model divided into Sculpture, base, and accessories! Few pieces, so you can just scale and print up quickly and easily!

Images: The Model’s images in case you need them for your shop!

X Poses: 3D files where we show the X pose of the model, so you know how to assemble it!

Pre-supported Chitubox: Pre-supported version of the pieces editable in Chitubox software, in case you wanna make modifications to the supports!

Pre-supported STL: Pre-supported files in STL format for you to use in different slicers! Load, and print the Magic!

6. RESIN AND FDM:

All our models can be printed in any material, just make sure to have the proper configuration in your machine for it. Normally, our Patreons prefer a combination of both: Resin to catch all the details in the models, and FDM for the bases. That way, they can save some materials and optimize the budget!

For our FDM users, we invite you to check our Star Wars Facebook group to see the magic that our community performs in filament! And our best advice, tune up the best quality in your machines because the Wicked models are full of textures and small details that will blow your mind, amigos! Also, don’t be afraid to experiment with clear resin, LEDs, and other power-ups!

Usually, our models take that voodoo into consideration for the design, so we can take the most out of each character! If you do not know how to use any of these, don’t be shy and ask in our FB group, We are 100% sure you will get any answer you need there!

7. GUMROAD TROUBLESHOOTING:

Sometimes, the Gumroad links don’t show you the correct discount and don’t let you download your models. When that happens, here you can find the options you have to get your precious loot!

1. Sometimes is just that you try to open the links too fast and these are just bugs and don’t show the discount on them. Please try to open the links and give them some seconds between one and the next, most of the time will solve your issue! If this doesn’t work, please try the following options.

2. Press Shift + F5 and try to download again.

3. Try opening an incognito window in your browser, and paste the links there.

4. If the option above doesn’t work, can you please try with another email?

Hope this works for you!! We will be ready to help you out in any way we can, so relax, try the steps above, and let us know how it goes!

8. PRE SUPPORTED FILES

Since June 2021, all our models have come pre-supported for Resin printers!!! Our pre-supported files come in two formats: Chitubox and STL.

- The Chitubox files are editable in the Chitubox Slicer! Chitubox is our weapon of choice when comes to slicers, that’s why we offer our dudes a native Chitubox file of our supports, in case you want to edit them!

- The STL files are pre-supported in Chitubox, but exported as STLs so you can use them in other slicers! Still, we strongly recommend using Chitubox to print our pre-supported files. It’s the slicer where you’re gonna have the most success ratio in Wicked!

The Pre-supported files are made with the configuration that works out for our printers. Please remember that every printer is completely different, and there are hundreds of different settings to make a successful print.

That’s why the pre-supported files MUST be checked and complemented in any way you feel necessary! We encourage you to check them and add/remove any support you feel necessary. Once you get the hang of it, it will work as a charm!

9. PATREON PAYMENTS

1. If you’re a new subscriber (Welcome to Star Wars) you will be charged as soon you subscribe to us! For that payment, you will get the Welcome pack and the current Monthly term! You can check the Patreon description to see what the current line up!

2. After your subscription, you will be billed on the 1st of each month! For that payment, you will get the newest term, released in the next days of that month. The new term will be released around the 30th of each month. That day we will be sending a new message with the links to download and the info about the release. Also, we will make a post on Patreon so everyone in our community notices the newest models!

10. PROMO PRINT AND SHARE:

Print any of our models, paint them, and share them on ANY social media! Then send us a screen where you share it and voila! You can ask for a FREE new model to continue your printing streak! Just write us a PM on our Facebook page, with the screen attached and the name of the model you would like, and we will send your new and shiny model as soon as we can! Here is the Facebook Page for you: https://web.facebook.com/StarWars3dModels

11. 3 MONTHS CONSECUTIVE" REWARD!!

Yes, dudes! It's time to show how much appreciate your permanence with us! If you are subscribed to our glorious Patreon and stay for 3 consecutive months, you can write us here on Patreon and ask for a complete term of ANY of our Patreons for FREE!!! Just let us know which model you want in your PM, and we will send the complete term that you like!!! The term can be of any of our Patrons: Wicked, B3DSERK, or Star Wars 3D Models

Here are the links to the stores in case you wanna check our complete catalog!

WICKED - Marvel Comics: gumroad.com/3dwicked

B3DSERK - DC Comics: gumroad.com/b3dserk

STAR WARS 3D MODELS - Star Wars: gumroad.com/starwars3dmodels

12. HAPPY BIRTHDAY FROM STAR WARS!

In our country, celebrating a birthday is pretty important for us. So we want to extend it to all our Wicked people!!! On your special day, you can ask for a free model from Wicked, B3DSERK, or Star Wars 3D Models!

You just need to write us on Facebook and send us a photo of any document where it's the date of your birthday, and we will be more than happy to send your Wicked gift!

13. FILE ISSUES AND REQUESTS

Do you have an issue with a piece? Or do you have a request for the Wicked team? Say no more! Our channels are available 24/7 for anything you need from us! We will try to answer and help as soon as we can, my dear amigos!!!

Our primary and best way to get a quick answer is our beloved Patreon:
https://www.patreon.com/starwars3dmodels

If you need to include a photo, our Facebook group and fan page is the best place to do so!

Facebook fanpage:
https://web.facebook.com/StarWars3dModels

Star Wars Facebook Group
https://web.facebook.com/groups/starwarspatreon

And if you prefer Instagram:
https://www.instagram.com/warstarpatreon/

NOTE: Take into consideration that we ALWAYS answer all the messages you send to us. It can take some time (normally from 12 to 24 hours), depending on the volume of messages. On the weekends we are not fully available, so please have extra patience on these days with us, amigos!