XaiJu
techoptimized
techoptimized

patreon


Final Fantasy XVI - HDR Optimized Settings


The game DOES USE/APPLY Playstation HDR Calibration app settings.


The game has a fairly good HDR implementation by actually applying the system level HDR Calibration app values...but not exactly.

In fact, its Max HDR Luminance will generally be noticeably higher in an unpredictable way compared to anything you've setup there.

For this reason, Dynamic Tone Mapping is suggested.


Moreover the game seems to slightly increase the black levels in HDR, but this can be fixed with the following in-game settings:


BONUS:

Comments

Yes

P40L0

Still the same for PC?

haris mohammad

Yeah, I wouldn't go over 5 or it may look too washed out in outside areas. Motion Blur 2 is fine also in Performance mode

P40L0

Also, Ill stick to performance mode. Should motionblur be set to 2 aswell? :)

Moxify

Thanks! I’ll leave this for default but you wouldnt recommend by adjusting it a little higher to for example 6 or 7? It will probably get a little brighter ofcourse but I’m afraid it will make the graphics even worse, washed out, corny, etc

Moxify

Yeah, the game has not a great HDR implementation as many areas will look too dark and others too washed out even when using the same setting. 2 should be the most balanced overall but if it's too dark too often for you, leave it default

P40L0

I use all of your TV, ps5 settings and DTM on. My brightness is set to default (5) by now but I feel it could be a little too dark sometimes in very dark areas? You suggest 2? Wouldnt that make it even darker? Like it would be impossible to see something? I use your HDR filmakermode, DTM on and video range set to limited.

Moxify

Yes

P40L0

Is PC the same?

Oskar Wysokiński

Hai ragione ed a volte è un vero peccato. Giochi spettacolari che peccano si queste inezie. Graziw

Riccardo Pietro Ranieri

No, non toccare la calibrazione di PS (che comunque per il G3 con HGIG deve stare su +18, +18, 0). Quando trovi giochi "fatti male" in HDR puoi solo provare ad aggiustarli in-game con le loro opzioni (fino ad un certo punto) ma poi quelli sono. Io personalmente non tocco più i settaggi di console/PC/TV quando sono tutti calibrati alla perfezione. Il resto sta solo ai giochi.

P40L0

Anche io godo con FMM e Hgig, ma questo gioco purtroppo lavora male sui neri. O sono belli profondi ed è tutto troppo scuro, oppure il contrasto ne risente troppo per i miei occhi. Lasci comunque 11 11 per final fantasy xvi sulle impostazioni della play o ritoccandole potrebbe migliorare? Grazie mille

Riccardo Pietro Ranieri

Prova anche FMM + DTM e vedi se lo preferisci ad HGIG, altrimenti alza la luminosità in-game da 2 a qualcosa di più alto. Come ho già scritto poi, evita la game mode...

P40L0

Ciao Paolo, su G3 che impostazioni consigli allo stato attuale. Ho provato filmaker + hgig e game mode + DTM e luminosità a 2, ma il primo è più contrastato, ma i neri schiacciati, l' altro troppo buio. Non trovo una buona impostazione. Grazie

Riccardo Pietro Ranieri

Sul G3 per me la modalità "Game" è bandita per sempre. Uso solo ALLM + FMM (nel mio caso con HGIG forzato tramite ColorControl via PC, ma per la maggior parte degli utenti è più semplice abbinarlo col nuovo DTM e via). In quest'ultimo caso prova la Luminosità in-game a 2, ma se è troppo scura per te alzala un po'

P40L0

Ciao Paolo, su G3 che impostazioni consigli? Filmaker + DTM e luminosità a 2?oppure game mode in DTM? Grazie

Riccardo Pietro Ranieri

Nope

P40L0

Has this changed at all with the DLC release?

Mark Barry

Dynamic Tone Mapping on 2017 series = Dynamic Resolution: Low, but it doesn't work in Game Mode due to a processing limitation to preserve low input lag. It will work with any other HDR presets but with much higher input lag so I don't recommend it. Use all my suggested settings in the video for gaming on B7 and then just increase the in-game HDR Brightness to your liking.

P40L0

What setting is DTM under? I used color control to unlock the things you recommended in Game Mode, the ones that are usually locked. Is it disabled on Game Mode no matter what? If so, I will change my settings

jv

Screen Brightness at 2 should be used with DTM: On...which doesn't work in Game Mode on B7. Try setting it to 4 or 5 on B7

P40L0

I am on a b7a, with settings tweaked as per your recs. Screen brightness at 2 is very very dark — am I missing something? Thanks for your time

jv

What brightness did you end up using? Have a b7a and 2 seems too dark

jv

I know, both modes are not ideal on OLEDs at the moment but personally I will always prefer frame consistency over stuttering. The next patch should allow removing or reducing Motion Blur which may also help in this case. Not a good state at the moment.

P40L0

This game looks and feels awful on my oled, had to change to fps mode just to make it playable as 30fps + awful motion blur looks disgusting.

Matticus

The game seems applying and increasing the system HDR Calibration value in a non-linear way, so if you set it to +11 you would have 800 nits in the first level but 2.000 nits after. It's also overly dark/dim in HGIG compared to calibrated SDR, so it's better stick with DTM for it. Leave the console to +25 clicks for DTM

P40L0

The game seems applying and increasing the system HDR Calibration value in a non-linear way, so if you set it to +11 you would have 800 nits in the first level but 2.000 nits after. It's also overly dark/dim in HGIG compared to calibrated SDR, so it's better stick with DTM for it.

P40L0

I'm confused because if you're using DTM you usually set PS5 HDR Calibration to 25clicks but now I'm hearing it's 11clicks for DTM with FF16... Is this right?

Jason Fortuno

Hmm, If i wanted to use HGIG for accuracy, could I just set the PS5 to 11 clicks ? Supposably that keeps it at ~800 nits. I feel like the game is suppose to have a somewhat subdued look, and DTM might be going against that too much.

Stanley C

Oh, no, the raised blacks are also with HGIG and DTM: Off. I wrote DTM there just because it was suggested before for this game.

P40L0

Sorry, you said set screen brightness to two to fix DTM. But if we are using a 2017 panel would you suggest just leaving it default at 5?

Weston Wright

Sorry, I didn't understand

P40L0

P40L0

Do we leave default is we don’t have auto tone mapping?

Weston Wright

ciao paolo, con il mio lg c1 e solo con ps5, quando avvio un gioco che ha hdr o vrr o tutti e due, lo schermo diventa nero per due o tre secondi e poi ritorna con l'input giusto.. è normale?

Michael


More Creators