Captain America helmet download - Marvel Rivals
Added 2025-02-01 18:03:08 +0000 UTCHere is the first one of the month :)
Captain America helmet from Marvel rivals.
I have added several versions like fully combined ones and split by parts and color, so you can just use a specific color filament and not worry about the post process.
you will also find even more pre sliced options for all of these for you to choose from
As always , made based on my head size at a 585 mm circumference :)
This one reminds me of something else, so I am working on a little variant that I will post tomorrow as well :)
Comments
Hi Jared, thsi wqs released several months ago, so it is not available as part of this months rewards - before you join there is a link with everything that is available for download before you join so you know what to get . I will send you a message woth more info
Marko Makaj
2025-06-23 12:30:40 +0000 UTCHi I just joined, how can I download this model?
Jared McPherson
2025-06-23 12:26:51 +0000 UTCIf you joined this month the we are makers tier - it should be in your patreon inbox :) drop me a message via the inbox/messages if you cant find it :)
Marko Makaj
2025-03-30 16:40:14 +0000 UTChello i was wondering if it was to late to download this one
Rusty
2025-03-30 16:13:37 +0000 UTCsent to your patroen ibnox :)
Marko Makaj
2025-03-28 16:42:46 +0000 UTCHow can I download this file??
Alejandro Chang
2025-03-28 03:47:08 +0000 UTCfebruary folder - it is located in your patroen inbox :)
Marko Makaj
2025-03-11 08:32:31 +0000 UTCWhere do I download the files?
Bernardo Lopez
2025-03-11 01:07:09 +0000 UTCmarko any chance we can get a hydra version??? the hydra logo instead of the A ???? thank you
Enrique Hernandez
2025-02-24 13:45:14 +0000 UTCNo, those are stl files. Only 3mf files are to be printed "as they come" - i am test printing it myself so will upload 3mf file for bambu soon as well, that way we have a file that we know works as the print orientation and supports have been tested :)
Marko Makaj
2025-02-13 09:57:49 +0000 UTCWhen i open your files in Bambu should I print them the way you already have them oriented on the plate? I'm having sport failures left and right
Isaac Stroupe
2025-02-13 01:27:35 +0000 UTChey :) in theory that should be correct, however we have to take into account thin and the fact not all heads are shaped correctly, plus if you wish to leave the room for padding , so yeah 95-96 would in theory work :)
Marko Makaj
2025-02-12 09:36:10 +0000 UTCIm slicing this one right now. Your head is 585mm and mine is 558 (5% less) do you think if I scale all parts to 95% that would get me close?
Isaac Stroupe
2025-02-12 02:35:50 +0000 UTCOh you mean the round ear pieces - yeah just wing it, cant go wrong with this one
Marko Makaj
2025-02-09 08:58:24 +0000 UTCRight but there's nothing on the ring to attach to the helmet it's just a puck so they can go on the helmet at any angle.
Mark Carrozza
2025-02-08 22:19:16 +0000 UTCThere is an indent /slot cut out in the ears where the wings go
Marko Makaj
2025-02-08 22:17:13 +0000 UTCLooks great, gluing it up now. One thing there should be some kind of registration for the wings to glue the pucks at the right angle for the wings to be.
Mark Carrozza
2025-02-08 21:32:53 +0000 UTCSure - 622.3/585 = 1,0639 , and turn it into % by x 100 = 106,39 %
Marko Makaj
2025-02-08 19:45:16 +0000 UTCCare to share with me the math you used to come up with the 106.39% number?
T.J. Rusk
2025-02-08 18:22:05 +0000 UTCI made one that fits my head perfectly (I have a 21.75" head, so scaling it to 91 fits snug. If I were to scale it to 95%, according to Marko's 23" head, then it comes out a bit lose for me but that's because I have a small and slim head). I added elastic bands so i can slide it in and out. I add elastic bands for all my helmets just incase the magnets don't hold it up. I don't need it to remove completely, just enough for me to slide on my head but a couple magnets would be great for it to snap in place.
John H.
2025-02-08 15:26:18 +0000 UTCyes always scale the parts uniform - i made them for 585 mm circumference ( my head) , but i leave room for padding - so if you are using 622,30 , the scale should be 106.39 %
Marko Makaj
2025-02-08 07:31:51 +0000 UTCI'm fairly new to printing helmets. My head circum. is 24.5in/622.30mm. Should I scale the parts uniform? How much should I scale it? Any advice is helpful. Thanks!
T.J. Rusk
2025-02-08 04:20:43 +0000 UTCMagnets would be amazing to connect the dome to the eyes/chin piece
Leighton’s Nerd Space
2025-02-07 22:44:22 +0000 UTCAhh I see.
John H.
2025-02-02 19:32:28 +0000 UTCThe helmet just slides on, there is no need for magnets
Marko Makaj
2025-02-02 19:28:20 +0000 UTCMagnet holes. Are they designed to slide on your head after welding the pieces?
John H.
2025-02-02 19:11:36 +0000 UTCthank you :)
Marko Makaj
2025-02-02 15:27:52 +0000 UTCi am going to print it in parts mostly due to print limits, but if i had a larger printer i would print the "blue" parts one piece, ears separatelly and chin and "A" , so i can print it by color as well :)
Marko Makaj
2025-02-02 15:27:46 +0000 UTCthank you so much :)
Marko Makaj
2025-02-02 15:27:02 +0000 UTCwoohoo :D yesd :D
Marko Makaj
2025-02-02 15:26:57 +0000 UTCmagnets ?
Marko Makaj
2025-02-02 15:26:20 +0000 UTCIt doesn't have magnets :(
John H.
2025-02-02 02:36:06 +0000 UTCHECK YEA!!! NOW I CAN ADD IT TO MY COLLECTIBLE SHEILD TO FINISH MY OUTFIT!
Gaven
2025-02-01 21:21:34 +0000 UTCLove it
julio sanchez
2025-02-01 20:49:40 +0000 UTCWould you recommend printing it in one piece or better in individual parts? Thinking of doing everything in one piece except maybe the wings in resin
Phil Frb
2025-02-01 18:31:48 +0000 UTCAwesome
Andrew Sheffield
2025-02-01 18:06:30 +0000 UTC
