Added some stuff to help you build :)
Added 2023-09-21 10:48:35 +0000 UTCI Organized the Westar folder a bit more, so now you have 1 more folder "assembly instructions"
In there you will find
- assembly/parts name map
PDF:
- assembly instructions
- hardware parts named
- print orientation suggestion
I also added 3d printed photos examples, and a functionality animation - just for the fun of it :D
The photos of 3d printed parts will be posted on FB, as patreon doesnt allow me to post photos and videos at the same time :)
Comments
I'm also looking for the same I have the files but looking for all the parts to complete the assembly after 3d printing them I'm assuming some springs and rubberbands as well. I haven't found any way to add electronics which would be nice but not necessary. Thanks in advance.
Victor Marinez
2025-01-24 16:51:29 +0000 UTCwhere do i go to get this file?
3D Pathfinder
2024-05-12 03:51:12 +0000 UTCBased on your status you can clsim m it as part of your old rewards. Drop mr a message , ill share all info and links :)
Marko Makaj
2024-04-23 07:41:40 +0000 UTCHow do I get this one?
John Fletcher
2024-04-23 00:15:44 +0000 UTCThanks for the input, thinking issue was i used PTEG instead of PLA like I have done in the past where your designs print flawlessly. Did a little dremel work and seems tro work fine now. I appreciate your help!
Mike Owens
2023-12-06 12:15:54 +0000 UTCwith 100% certenty i can say the files work as they are designed, i myself printed a few of them, as well as many other people and it worked great on the first try :) https://www.instagram.com/reel/Cxaor7mK6Z4/?igshid=MzRlODBiNWFlZA== If you like, send me some photos/videos of where your issue is, and iβll help out :) , but we can be absolutelly sure no file adjustment is needed, given how many people made a functional one without problems, inlcuding myself :)
Marko Makaj
2023-12-03 21:05:59 +0000 UTCThink I messed sothing up but on the slide releaseis not holdng the slide back, seem like it needs to be slighlty less of a gap. Ijust barley touches cath when I have it pushed fully in the hole. Any ideas?
Mike Owens
2023-12-03 18:15:17 +0000 UTCWhere can I get these files ? I wasnβt a member back in sept . Are they on your Etsy ?
Scott
2023-11-30 19:32:25 +0000 UTCPretty standard for all my prints - 2 walls, 20% infill, 3 bottom layers, 5 top layers, 0.2 mm layer height, the speed depends on your printer :)
Marko Makaj
2023-09-23 05:41:40 +0000 UTCDo you have suggested print settings, as far as walls & infill?
d smith
2023-09-22 17:50:59 +0000 UTChaha love you too :D
Marko Makaj
2023-09-22 12:51:13 +0000 UTCi love you marko !!!
Moises Flores
2023-09-22 11:49:19 +0000 UTCHey Joseph, this oen and all the other ones this month are available zo " we are makers" tier, and you joined the "youngking tier" so you are not eligible for this one at the youngling tier. If you upgrade to "we are makers" tier you get an automated email with welcome models and "september 2023" downloads to your email - its a google drive link, and sll the files will be in there. As a youngling you allready got a message to your email inbox, but with "youngling" benefits. The youngling is considered a test tier, a cheap way to test out my models but it doest get you much. The real patreon is at the "we are makers" tier and you get lots of stuff there, you just need to pay the diference wich is a few $$. Let me know if you will need help setting it all up :)
Marko Makaj
2023-09-22 05:24:42 +0000 UTCI'm new to Patreon. Where can I download this STL?
Joseph Dawson
2023-09-22 00:56:03 +0000 UTCHelps if I actually check the folders! Thanks a bunch can't wait to get started
Scott
2023-09-21 20:49:24 +0000 UTCall good :) patreon isa bit annoying in some areas, but great you managed to find it all :)
Marko Makaj
2023-09-21 20:47:51 +0000 UTCthats actually a smart idea
Marko Makaj
2023-09-21 20:46:59 +0000 UTCthere are print orintation suggestion in the folder - and a photo how i printed it :) i used support only on the trigger guard :) , also in the folder :)
Marko Makaj
2023-09-21 20:46:16 +0000 UTCHow is the M1 supposed to be printed? On its side with all of the side being supported because of the little nib on the grip or with the grip face up?
Scott
2023-09-21 18:59:45 +0000 UTCall it was showing me in the email was the k 19. i didnt realize there was a "load more" button.... having a day. found and happily and excitedly downloading
Chris Cox
2023-09-21 16:28:32 +0000 UTCThe moment you join an auti ated rmail with welcome models and "september2023" folder is sent to you - in case you didnt gez it or its not working please just let me know :)
Marko Makaj
2023-09-21 16:27:01 +0000 UTCNVM Im stupid
Chris Cox
2023-09-21 16:26:18 +0000 UTCIs there a Download Link for this im missing?
Chris Cox
2023-09-21 16:21:01 +0000 UTCTry turning your videos into GIFs. That way you can have photos and "videos". Another Patreon I support does it that way.
Chris West
2023-09-21 15:08:25 +0000 UTCAwesome. Thank you for that. Iβll be finishing my print today and this way I can order whatever hardware I need.
Leo Mitchell
2023-09-21 12:51:16 +0000 UTC
