Chest and Ab plates _ sabine armor

Sometimes i give myself more work than needed but oh well :D

!!!! I created a "SABINE WREN ARMOR" FOLDER  in the " we are makers" August folder - and everything sabine related will go in there , so hit refresh :) !!!!!

Sorry for taking so long with this one but wanted to do it right _ and by right i mean i wanted to continue the trend of paint guides i came up with when making the helmet, and transfer it onto the chest plate.

Given there are so many versions and functionality, it takes quite allong time to make, so this one is done, and shoulders are next :)

I've seen some good feedback on the "paint lines" on the helmet, so i tried to improve on that, there is now a 0.5 mm insert version wich should just barely give you a visible line on where the paint should be applied.

I also added an experimental version with the same 0.5 mm details extruded outwards, so we can test if its easier to sand it away or if it works better with the insert version - curious to find out :)

I also added mounts to the plates, so there are now tons of versions of each plate, and you can (long story short) choose between clean ones ,  plates that can be attached seperately as 2 pieces, or plates that combine together forming 1 plate - your choice. I figured for makers it should be all the required options so you can pick wich one works best for you and your customers

so to recap: 

INCLUDED:

- chest armor

- ab armor plate

3 set options : 

A - clean 

B - with 0.5 mm inset paint guide

C - with 0.5 mm extruded paint guide

_______________

Each set comes with: 

1 - clean chest plate ( free attach to suit)

2 - clean ab plate (free attach to suit)

3 - chest plate with "mounts"

for manual attachment to the ab plate

4 - ab plate with "mounts"

for manual attachment to the chest plate

___________

The plates can be added on its own or one of the

attachment options to hold it in place

___________

M3 screws can be used with m3 heat insert thread

(if you choose to do so)