Marko Makaj

Beaked skull - multicolor

Added 2023-03-07 13:08:52 +0000 UTC

I've added a multicolor print version for printers with multicolor printing capability., so now you can print a multicolor mask :D

Now, before you ask why i dont do it for all prints - it depends on the topology of the model as well the modeling approach. My main goal is the get the best possible results of a 3d printable model. So some models will have to have the detailes "carved" into the mesh to give best results while others can be done diferentlly. It also depends on the toplogy of the model. Here, in this case, the extruded details are pretty straightforward so i was able to seperate them as a secondary piece of geometry. What that means is you can just insert it into bambu studio and use the "fill" tool to change the colors/filaments for the mask. The AMS system will take care of the rest and you are able to get a nice 2 color print (or more colors).

Another thing to consider - it would appear my face is rather thick, so make sure to check the scale or scale it down a bit before printing (valid for the entire beaked skull project :)

Just refresh the folder and you will find 2 more aditional files :)

Lets see those multicolor prints :D